Видео

Great Video! Will this work on a Kobra Plus? I keep seeing videos on the Max and it’s exciting, but I opted for the Kobra 2 Max.

Yooo this looks so cool

Can you please help me set up the motherboard kippler combo ??

thanks, I tried it your way and worked out great

I bought a k2 plus.....tinkering has disappeared....but i do have an old ender 3v2 that id love to upgrade to core xy...just to appease the tinker side of me😁

Sweet thanks brother. I’m actually getting my K1 in the mail this Sunday. Going to see if I can order this kit within the following week

I recommend a silent board as well takes away literally all the noise from the drivers

These are some amazing upgrades for an already good workhorse. One question I have with the direct drive and hotend upgrades - can you use CF Nylon with this setup reliably? (with hardened nozzle of course). Tthe direct drive setup still using a portion of the Bowden tube to the hotend gives me a little concern because it would be approaching the PTFE softening point.

This is awesome! THANK YOU!!! Im about to buy the rollers. Can you please provide me a link for the wires for extending the filament sensor?

I was interested by video name, but 1.5h and too boring

I love tinkerers

Great video but realistically all those parts you just pretty much bought yourself one of the new printers if not a Kobra Max 2

I got the same mat my wife uses it for resin .

Can anyone recommend a direct drive extruder I can get for anycubic vyper?

Late to the party but I did the direct extruder mod and klipper on my Neptune 2S and I agree it makes these older printers great to play on.

I’m going to attempt doing this! Doesn’t seem that daunting of a task. Especially the mainboard. Thank you for the video!

Bought everything I needed in the video, including the m3 screws wish me luck that this starts to help me print well with TPU

can you tell me which Hero Me pieces you're using?

hey man can you make complete tutorial of wiring and changing from stock Kobra max mainboard to SKR, i am having a lot of problems, and since i am not electrician i need to understand a bit better ! nice channel !

My k1 max is now an expensive paperweight. Frustrating

how did you get auto level to work with out going over the bed ?

When you upgrade to the 5015 fans did uiu have to upgrade the PCB also?

Will you be able to run the 5015 fans without upgrading the PCB just want to make sure i follow your route that i wont be screwed and stuck because i miss something important?

just buy something like a sovol svo6 ace for the same money as the upgrades, will be faster

thanks for the help

Great video. Thank you.

Great video boss. I appreciate how to the point you are!

I seem to have made all of the upgrades you have made. I have just purchased a Creality Pad, what Ender 3 did you set yours for due to now having a direct drive sprite extruder and linear rails etc. Thanks, and I hope you plan more upgrades to the Ender 3 and video them for all of us.

Were can I find this model file for download?

"Think of your 3D printer like a cool gadget that creates amazing things out of thin air. " Do you need this kind of absolute beginner introduction for an advanced mod ?

THANKS!

Was it worth it?

making a big change to my Max. changing to a Co Print Chroma_pad (runs Klipper) and Multicolor head. Your pin out video was very helpful. I also found a motherboard problem I have to address. still your videos are proving to be helpful

i just press pause, then change the color and unpause …

Thanks for taking the time to share this video. As a retired Architect/Engineer, by design (pardon the pun) I'm always looking for methodologies to potentially improve the efficiency of an existing mechanism. On the surface I like the idea of a direct drive (thinking TPU) on the printer. But the first thought that ran through my head after watching your kindly provided video is; that seems like a lot of extra weight/mass added to not only the extruder, but to the X axis travel ability. Assuming you've had some time to print with this new arrangement yourself, have you experienced any X axis problems like travel input lag, increased vibration on the X-Y? Also, even though it's referred to as "direct drive", it still has a Bowden tube as part of the filament flow...just a much shorter Bowden tube. I'm thinking perhaps considering an even MORE pancake (thinner profile) style Nema motor for the extruder over the stock motor to lower the total mass of the extruder piggy-backing on top of the hot-end as it moves in the X-Y axis. Considering how cheap these slimline Nema motors are, seems like an additional positive upgrade. N'est-ce pas?

Awesome video! We’re looking to do the same here, could you share your printer.cfg file?

It was always trash. You just didn't know it at the time. Throwing good money after bad now is... Ill-advised.

What did it cost for that?

Hello JeDoVi Great video I have a question about my anycubic kobra max I keep getting error messages when I try to auto level my machine . says calibration a success but it does not ask you to put a metal object under the extruder . it moves to the home postition and then please wait for the preheating error auto leveling sensor abnormal please check it and wiring Not sure what to do the parts for this machine are impossible to find Any help would be greatly appreciated

I don't suppose you'd be willing to share profiles? I'm sort of at a loss with this thing, worried to go any faster or any bigger because I don't want to ruin a print

Thank you for continuing to make videos on this printer! I'm still running mine, and finding videos about it is getting harder and harder by the day!

When you were looking around for a 3D scanner, what scanners would you say were in your top 3 choices and what made you choose the Revopoint MiraCO Pro over the other two choices?

This is wonderful. Answered my questions, straight to the point! New subscriber here! Thank YOU!!!

Any updates? You said you was going to upgrade it further JoDoVi!

Thank you very helpful 😁

I love how you drop more things we need, on the final step of the process. Additional tools/materials required, which aren't disclosed at the start: 3 additional M3 screws of an undisclosed length and some nuts (disclosed at 2:08), something to press-fit the nuts into the adapter (2:42), calipers with a depth probe (3:18), angle cutters that can cut PTFE tubes cleanly (3:58), and most importantly an extended stepper motor wire (4:37). Odds are you'll have all the hardware, but who has an extension for the stepper motor just laying around? So, if you follow this step by step without pre-watching it, you're fucked as soon as you get to this point - You've cut your tubing, you've rearranged the hardware, and you think you're all done. And then bam, you need additional wiring.

Can the hot end be made to go hotter to work with the latest higher temp filaments? They are selling refurbished Kobra Max's for $150 SHIPPED on ebay! going to grab one for shits and giggles....

Great video, straight to the point, no nonsense. That's how it's done!

Hey, I have a kobra max too!! with the Hero Me Gen 7 , there are a lot of parts... can you please comment the parts you used for this project? thank you :)

Contrats on your road to 1000 subs! So happy to see vids about Kobra Max conversion. Man, all those cables though. I do not want to make my own Dupont connectors.