Видео

It keeps the setting it seems.

I ended up keeping the mics. Fraud would require deception. I disclosed my intention. It would be fraud if I didn't disclose. You're barking up the wrong tree, but thanks for the engagement / entertainment 😁

Appreciate this a lot ❤️🙏🏾

Why it's called 'float' I'm not sure, I just know that 32 bit float allows you to go WELL beyond the clipping point of audio.

Noted!

If I go any lower I get underexposed. 😂 - it’s probably the sweater I’m wearing that’s not helping matters to be honest

Thank you for the thoughtful comment and understanding what I was trying to say. 🙏🏾 Some of the comments that were coming in were either people who thought I was attacking MKBHD (which I’m not, I made that clear), people who clearly didn’t watch the whole video- and thought this was click bait, or just rude comments (most of the comments I just mentioned are removed now if you don’t see them) I was actually concerned that nobody understood until I just read this. Your sentiments are exactly how I felt.

Thanks for the critical response. However, I have to ask, did you watch the whole video? Because he almost hurt someone or himself. The beginning was about the app. This isn’t clickbait, this is actually messy. The other part was about him doing more than double the speed limit in a zone where there’s posted signs for kids crossing.

Wot?? No hate, but calling Shaun out for clickbait? K then... I'm a reasonably astute guy who _hates_ clickbait with a burning passion, and can smell it a mile off. Absolutely none of it here. Please, please use a dictionary before using words my man. Not to mention he qualified every criticism he made with statements like 'may be none of my business', etc. Guy couldn't be less clickbaity if he tried. 'What are you doing, Marques?' is both the title _and_ the content. Thus the very antithesis of 'clickbait'.

Someone who took the time to watch the entire video. 🙏🏾 - I’m actually floored at some of the responses I’ve been getting. There’s one viewer (who if they’re reading this, I actually hid them from the channel so good luck commenting into the abyss) - who kept calling it horeshit with their comments (plural). Another user immediately out of the gate just decided to call me fat repeatedly and then wondered why I got offended. This comment isn’t the worst, but it indicates to me that the whole video wasn’t viewed. But I thank you so much for defending my point. 🙏🏾 - it’s not click bait everyone, watch the video in its entirety.

@@TechMixr You're welcome. Can't stand misinformation in any form.

I wish I could have pinned this response to the main thread. I was tempted to make a response video to all the misconceptions in the comment section I received (and removed because most were offensive) but to be honest, there’s no winning with some viewers who either didn’t understand the sentiment of the video - or didn’t watch the whole thing.

It is very hard to disagree with you. It’s sad. I think he’s into tech still, but if he came out and said he’s tired of making videos about it and that he’s burned out on it, I wouldn’t be surprised. I think the most cringe part is the apology tweet. I didn’t say this in the video, but as cliche as this statement is, I believe it rings true: he’s not actually sorry, more, he’s sorry he got caught.

A brat? wtf you on

@@moshebaum7612 agreed. As a new creator, to say that he’s a driving force and inspiration is an understatement. It just sucks to see this going on.

@AdamBenjamin-fp4hz he did in a Twitter/X post. But to be honest, it seems like it was just a mandatory response.

@@IamJay you missed the point, the mic itself is supposed to be capable of it without needing additional hardware.

@TechMixr ah ok, i don't know why they don't put it by default. Hope they will add it in next firmware update

Next to the play arrow at the bottom under the name TechMixr, the link is there It should say: Did The Panasonic S5lI Firmware Actually Improve Human Autofocus? - it might be cut off but you should see it

@@lionelweedon5306 only if you change the setting using a receiver. Simply plugging in an external mic doesn’t enable 32 bit float recording on the transmitter internally (tried this before)

@@PoloHungary exactly. This is such a bad oversight by DJI and it’s very disappointing.

@@RobertWindley thank you. I was a little disappointed when I saw others defending DJI, but a few of you are seeing the reasoning for my making this video. I appreciate the compliment as well 🙏🏾

@@richmax13 great advice and feedback, thank you 🙏🏾

@@TheSalman200 I use this switch because I have more than 1 10 GbE client, and also, in this video I’m using AIMesh to connect 2 routers. If you only have 1 10 GbE machine, you don’t need the switch or a 2nd AX89X router. If you’re using the AX89X, update the firmware, under LAN - Switch Control, turn on NAT acceleration and login via PPPoE also, don’t use advanced DMZ anymore- this was changed after the video was posted as ASUS fixed their NAT acceleration in a firmware update.

@@TechMixr thank you for prompt replay. do I need to turn on Bridge mode to use Ax89X for PPPoE ? any other router recommendations as it's 2024. thanks. Actually I have 3GB connection but I don't get full speed. So was thinking to replace bell giga hub. But I am not finding any proper way or instructions.

@@TheSalman200so I purchased the ASUS Wifi 7 version of this router and it’s terrible. I’m sticking with these routers. The gigahub isn’t the issue, it’s NAT acceleration that’s the issue. Follow the steps and you’ll be fine. Bridge mode is the same as logging in with PPPoE. It MIGHT disable the wifi in the gigahub but I’m not sure.

@@TechMixr thank you for the help. I did follow all the steps & getting 3.5GB for download but not getting 3.5GB for upload. Speed test is good giga hub but not in Asus router.

So I use the 2 AX89X routers in AIMesh and have for a while now. Connecting 10GbE between them has been flawless. The best thing you can also do is download a wifi analyzer and manually throw the 5 GHz on a channel that’s not clogged up with other networks (do this on the first router). When AIMesh does its process, it’ll be on the same channel / SSID. Good luck!

@@codfatherkilla1905 does it need to be in advanced DMZ or can it be in plain DMZ?

​@@TechMixrDMZ works fine gives me Nat 2 Advanced DMZ gives me Nat 1 when I'm Nat 1 I notice I get better Upload/Download speed vs Nat 2. Nat 1 800+ download and 400+ upload on Nat 2 Average 300+ down and 85 upload I have Fibre 3GB wired in

@@imdavemtz I wish just plugging it in would change the bit setting, sadly that isn’t the case. If you plug a mic into the transmitter, it will stay in 16 bit. The only way to change this setting, is with the receiver unfortunately, or the DJI Osmo Pocket 3.

@@TechMixr wow thanks for the let me know. I appreciate it a lot I may do a similar solution if o don’t find anything better. I need a small easy and fast to use to record some crucial moments without a big setup.

@@shantanusinghmertia7617 so far it has remained in 32 bit float, even after the firmware update

@@bruceiler9399 I haven’t tried the Eero stuff so I can’t comment on it unfortunately. Are you on fibre to the home with your HH 3000?

@@TechMixr Yes I’m on fibre for Wi-Fi and TV .. I have 150 gbs… it worked fine till we added the Sunroom .. tv out there will buffer from time to time .. I wasn’t sure if I should add more say like go up to 500 gbs but was told it would do nothing for signal .. it’s working through two walls no to get there … so I’ve tried eero 6 and a extender … both leaving me with less gbs then I had with the HH3000 .. So I think I’m going to have to live with it the way it is … we’ll see .. thanks for responding it’s much appreciated!

@@Phil-D83 No need, everything runs flawless with this setup.

@TechMixr I find it has benefits that regular routers cannot match

@@Phil-D83 it was earlier this year. It’s not them allowing it, it’s the CRTC forcing them to do it. Also, with a bypass, it’s been easy to do opensense as a router for well over a year now.

@@Phil-D83 they no longer offer 8 gig to new customers. That being said, I’m paying a lot less with no contract and I’m probably never getting rid of it

@@EdwardKilner I’m not sure if you’re being sarcastic or serious.

@@TechMixr Not being sarcastic. You obviously know audio equipment, and have lots of it. The one Mic2 I own came with my P3 and I love it. Might buy another with receiver to use it with my Nikon. I understand it’s part of an integrated system and I understand how it was specified because I’m an old engineer and know these things. That jury rigged setup was risable. If you ever told us what you plan to use the stand alone Mic2 for, well I have forgotten it. It likely was not, and should not have been a requirement for DJI design engineers to consider, then or now.

@@glasgowharleyrider if they fix the ability to make the changes (without needing the additional hardware) by pushing a firmware update, I’ll happily post a ‘thank you’ video - I’d even consider taking this one down. No fix as of yet.

@@gabiroli86 you still need to login via PPPoE. A true bridge would self authenticate via the hardware. The issue here is that if you buy consumer network equipment, it may not be powerful enough to handle routing and PPPoE frames that take a ton of overhead. If it were a bridge mode like Rogers (to be clear bridge mode and IPV6 are the only things they seem to get right while everything else is wrong) - then you could use it with almost any router without performance loss/ massive CPU usage.

@@BreezzersGaming yes that should work fine! The video is just to illustrate that if you didn’t buy an action 4 or the full set (like if you just purchased the transmitter as a solo device)- DJI claims it’s capable of 32 bit audio. But you need to buy additional hardware and they don’t provide any other solution to change the settings (and going to a store and using a demo model doesn’t count) lol I hope this helps!

@@TechMixr well thanks, I didn't know the difference between 24/32bit. I use the Pocket3 for a web cam, (i Know expensive web cam. LOL) and the action 4's (I have 3, and the remote) I'm using on my Harley Drag Bike, and I just paired 1 of the action 4's with the Mic 2......the wind buffering was crazy when its mounted on the handle bars.