Видео

Nice video, thx. One question, can you remove the left sided widget completely from the screen?

Hello ! really appreciate this type of ``tip`s video`` !!so are we ok that all the front end (all front of car goes on the wltoys 104002? im searching a full front and rear set for it,if the xray xb4 is totally a copy 100%,for me beginner its totally perfect. thank you in advance for the answer(and sorry for my pretty basic english!!)

I wish one for my legacy 2006, where I can find it ? Do you have a link?

Hello, I know this is a long shot since the video is older, I have the exact same unit as you but I have plugged in all the cables and the unit works (Apple CarPlay) but no sound comes through the speakers, my stereo still has my audio through the stock radio station (Am/Fm) on the Macintosh unit. Any help would be appreciated

Sometimes I get a “Lost connection to rear camera” message on startup/park and occassionally in Drive. Toggling between these and Reverse eventually fixes it, but anyone have any idea why this is happening?

can you get the functions of the inbuilt unit still? fuel economy, trip computer, voltage, service intervals etc?

You could explain how to pass the main unit through the axuliqr of the android, that is to say, the reverse of what you did..

Is it possible to hook this up with an aftermarket pioneer radio?

Amazing. So except for the slipper diff in the center, you're basically getting a seven hundred dollar car for a hundred and fifty bucks, minus the quality.

So dumb question will this work in a 05 outback ll bean

IF YOU HAVENT GOT A SOLDERING IRON OR SOLDER SUCKER,YOU COULD USE A PIN VICE AND A 1MM OR 1/2MM DRILL BIT TO CEAN HOLES .

WHY OH WHY DIDNT LOTUS MAKE IT MORE EASY TO GET TOOINSTEAD OF HAVING TO FAFF ABOUT.

EVEN THOUGH A PART IS BRAND NEW,DOES NOT MEAN TO SAY ITS OK .I KID YOU NOT.AND MAKE SURE THE BULB SOCKET IS PROPERLY ENGAGED ON THE BULB PINS,CONTACTS.

I fixed this issue in my 2002 Outback by removing the switch, taking off the outer housing to get to the "switchlettes" inside (a bank of different actual switches that control the motion), and spraying each one with some light oil, then spraying the inside of the outer switch housing too (it's like 3-in-1 oil, but in aerosol). Works every time now. Granted, I used the wrong oil, and something like Tri-Flow would have been better, but for a 23 year old car, I figured what the hell...

Do you have a link to the kit?

How did you pull or (take out) out the cubby part?

So a Russian toy copied by a Chinese toy maker. Commie helps commie, nuttin’ to see here.

Was able to dix a 2012 Suburu Outback with this video a flathead screwdriver and a very small rachet set. Thank you!!!!

Thanks for the video. Looks as if the 2011 Outback is similar. My switch actually works, but somehow the tab is broken on the inside. I'll see what I can come up with 😅😂

How is that zip tie cutter and scissor work? The right tool for the right job.

Wow el wltoys es como un rolex chino...

Hi, do you have a new video with the new nifty city Carplay?

I have kind of an odd question: First of all this is exactly how I want to hook up mine (retain OEM stereo function) - Do you have to adjust 2(or 3) volumes with the method? Meaning phone bluetooths or USB’s to CarPlay unit (have a volume setting on your phone), then the new unit is treated as an aux my the old unit so on new unit your adjusting volume, finally on the OEM unit is your “master” volume. I absolutely abhor trying to balance aux in volume on 3.5mm or Bluetooth speakers it’s the master volume. Aka keeping one at 3/4 for the best sound quality and so on. Thanks for making this video

do you think if you parked the car "nose down" so the master cylinder was level not tilted up, you could use the motive master cylinder bleed function and avoid the bench bleed, or as a secondary bleed in addition the bench bleed?

the tripod method didnt over extend the booster and blow and of the seals?

surprising its not in millimeters

Thanks for the comparison! I plan on buying the Penske for my Exige early next year and this video is very helpful. Hope you make another video with an update after he install 👍

I've heard that with shocks it's all about fluid movement, and more is better. So that bigger diameter should make a big difference. Great video btw!

But where did you get the kit?

How did you Pull back that slider pin? After removing the bolt on top. This holds me from swinging the caliper or Im a something else?

Can i message you somewhere? I want to ask a few questions and show some pictures about instalation

If i have aux button on my radio, but i dont have aux input in my car will my new android head unit work? (I have aux button, no input port in my car, nothing happens when i press aux button) Just plug cables and im good to go? Thinking about instaling android unit with carplay, but im confused if it will work if audio comes from aux input..

Good video! I might have to try doing this too. I'm not sure if this it the same as my noise, I always thought mine was internal to the transmission but I could be wrong. I have some leftover adhesive sound dampner material from another project, I wonder if that would work as an alternative to the rubber sheeting you showed?

@ 9:09 you mention you have a "wide off cable" for the antenna, did you custom fit this as my 2007 model doesnt seem to come with that male antenna connector?

Do you lose your fuel mileage readout?

Did you have any problems with the passenger airbag light ? Since the indicator is in the old vent unit ?

Thank you for posting this video. I have a 9 inch android system that i want to install, i like my cd player. I got mine off Amazon

Great video. Thank you

Mine is a 2006 Elise with soft touch dash and instead of being held on with Velcro at the back and screws at front it's just held with two bolts underneath

❤ this works! 2006! Thanks so so much!

Subaru seat switches are repairable. Four switch module inside the case have contacts that build up carbon. With care to keep track of the springs and ball bearings inside, it's a DIY job. On our 2005 Legacy GT, the small parts snap together just one way, but take photos as you go.

I did this install but the sound seems to not work sometimes, I need to be unplugging and replugging the USB cable to 3.5mm all the time. Do you this situation as well?

Very thorough and helpful video. So seems like as far as feel goes, the dolomiti's biggest difference with the shiftr is the angle away from the driver, and some more adjustability?

Hello sir how are you, My Name is Mr. Albawi from Kuwait a fan or your videos and lotuses in general, TBH, i am looking for a good shifter.. Noticed that you have a new Dolomiti.. I just want to know that if you want to sell your old shifter just tell me, big thanks!

I finally got around to installing it this weekend. Do you happen to know the password for the "Factory Settings"? I didn't see anything included with the unit and am unable to change an settings (speed, etc.). Appreciate it.

You have the link where you ordered it from

Well made video

Excellent compareson.

Not reverse engineering, (one manufacturer) many brand names, like a record producer who has a song they would like an artist to record they pitch the song to (many artists) one makes it a hit others copy. Xray may have designed it and hold the copy rights, but divvy out the design to the one they know will not quite do as good a job and the one who will not even be a contender, just good economics, hit your three price points 1. Those who must have the very best=high price, 2. those like me who go the middle route=in between price, and 3. low budget=… well low budget folks. So no they are not copying but selecting what is out there offered to them, you can do the same thing , get an office here in the states, literally call someone in China and ask what do the have that you can sell or send them a design and they will work it up for you. Why this house gone bad for us in the states I don’t know, seams to me someone could setup manufacturing here and sell knock-offs as well. 🤷

Do you have a link to the wire harness to keep the stock radio working as well