Видео

Been watching for one of these the past week. Plus the upside is, boating season is bout over and ppl post stuff for cheap this time of year!

How did it do

Best rebuild video I’ve seen for these carbs

😢 I have a 1998 GTS 717 seadoo, bought new. Does the oil injector move with the throttle. What makes the injector move. I just installed carb & cables. The throttle operates great however the injector is not spring loaded & doesn’t move with the throttle cable. Does it move only when the engine is running? Thanks.

You talk too much dude

There is a second side of the carb underneath of the portion that the jets and seat go into. You need to pry that up and get in there for complete rebuild.

Great 💡 idea, 😊

Whats in the paint bucket at 32 mins mark please and thanks 32:27

why change the calipers tho? Why trust some 30 dollar made in Chyna caliper over the OEM ones made in the USA?

Looks good

You never did a follow up review of your Power Sport battery you bought from Amazon

You got an update on how it's holding up? Specifically the top of the door panels where you would rest your arm.

They all came with rear disks

loved it you picked the perfect paint 🤟

Looks just like mine!

Don’t be a fool and buy the tool.🤣🫡

Im rebuilding a dual set of minkunis off a 93 gtx very soon. Any recommendations? The carburetor is already off.

So it has been 20 months since the brake job. Have the Black Magic brake pads shown to be worth the double price tag? If you were to do another brake job like this would you use the same parts or go back with OEM pads?

black magic brakes seem to have shot up in price since this was recorded... the 16" brake kit is now $1,566 and it's not even in stock. my level of know-how stops at turning bolts, tugging/hitting things, and pouring (spilling) fluids... any way you could help me track down links to upgrade the brakes on my TJ? I'm running 35s with the potential for 37s in the future so i kinda felt forced to go with the kit, but if there's another way, I'm extremely interested.

Hey I got a 96 seadoo speedster. twin engine twin carb. 717 rotax engines. When in the water and full throttle, the right engine bogs down. Basically drops a few RPM and then goes back up. Any ideas what I can be? I already blew out the lines, cleaned fuel filter. I also tried changing the rectifier. Same.

Where's the follow up video?

Wow, is it ever clean inside.

is the water just coming out of the plug on the back?

I used a propane torch on my old wear ring which looked as bad as yours, heat it good and careful and get the screwdriver in behind it and it just bends right out

overfilled with oil, leave some open air to allow for expansion and to screw allen bolt in

Not sure why you remove the clamps , once you remove the bolts and washers the pump will slide off the drive shaft spline

Hey cool vid! What were the stock sizes for your jets?? I keep looking but can’t find any info

Thanks for sharing

The loop between pulse and return is unnecessary and fallable. Just plug return and disregard pulse during test.

36 inches -18.25 inches-2.75inches= 15inch remainder, not 18 inches, correct? Or am I crazy.

NEVER wirewheel or file the pulse cover! You diminish the raised metal surface. This surface is essential for an air tight seal.

thanks for taking the time to record for us nubies that want to learn great video

I’m gonna try this on a 4 Tec engine and see if it works. Got a 2006 GTX but don’t wanna spend $320 on the sbt tool

Why did you say you cut in three pieces why would the pipe that goes in the pump can’t be longer

nice job

Dude! Buy a tripod. You are making me seasick.

13:30...Are ya now...better use lube first. LOL! Sorry I couldn't resist. Thanks for sharing your install.

I just bought 2 of these. That start then runs for a few seconds and dies. One idles up real high and since i put new fuel in it wont start anymore. the other ran good until i put it in the water. Then it puttered out. I think they both need the carbs cleaned.

It just happened to me right now any solution?

Hey great video!! I’m having that same problem with my 06 TJ. Very frustrating!! How are these seals holding up and did they solve the water problem??

Just earned a sub my friend. Gonna have try this when I reinstall my 951 in my GTX. Thanks for sharing the forum in a vid

I have 2 of these ! So much fun !!

Are those 33x12.50?

Nice quick video! Just replaced mine and it fits really tight. Now I'll go adjust the door as per your suggestion bc it does fit so close to the top that it tore the last two seals. Fingers crossed it lines up as good as yours. Thanks for the video!!

Thanks for your detail explanation and it all makes sense. I've never rebuilt a PWC carb before and this will be my first one (two). I bought a 97 SeaDoo and the guy removed the choke plate and put a primer bulb hose in the hole. I guess he thought that was a good idea. He said he rebuilt it but I highly doubt it. So I bought a 96 carb on eBay and am going to rebuild it and put the 96 carb on the 97 machine. The eBay guy said they would match up but the 97 has an accelerator pump. He also said that it may take some extra dialing in/or even rebuilding the Jets to the '97 XP specifications. I'm wondering what would be the smart way to do this. Do you have any thoughts or suggestions? Todd

You got that for a steal! A rustless version is 2x that now! Cheers

Great video

Best video for replacing Jeep rotor and pads. Big thanks.

Really wanna learn more about these skis... a few people have said to try find one...

Nice video, good explain Also. I am rebuilding mine, Yamaha WR gp1200 99. I have an air leak from the "weird orings". When i dissasembled, the diaphragm was not. When i assambled it by the manual. Starts leaking air because of "weird oring" fail. I removed the diaphragm then the leak went down, but still. I sand grind the surface (flat Stone) AND get better but still leak. Same issue with the three carbs. I bought the service kit from eBay. Not Mikuni original parts. I put gasket sealant AND worked well, no leak. But i dont know if it a good Solution. What do you think i should try? New original kit? Gasoline gasket sealant? The popout pressure Is ok. Thanks un Advance,