Видео

How can you test with a light switch?

Have you actually done this before or did you just happen to record yourself doing it for the first time ever. Putting putty on the gaskets that are supposed to be under the sink is wild. Also, sawing off a piece of pipe while rocking and grasping the drain pipe of the other sink, wow. If that wasn't bad enough, leaving that huge bur on the cut piece of abs and then smashing the collar on there and no extra twist. To top things off folks, putting abs cement ON THE UPC STICKER AND NOT REMOVING IT before joinint the two pieces together. What in the world did i just watch????

Do you have a link for that switch? I like that the on/off turns on, then the timer has a separate light.

How do you pigtail range and dryer?

So what if I did all this, found nothin, and it still won't drain

oh man you take all the rings out from basket, they go under and up.

My friend i have a tester like your ok my problem is the 2 orange light come on but the one in the middle is flickering wy

Mate! you socketed the bend the wrong way!......the bend should be female socket and downpipe male. The only thing that stops it from pissing water at the join is the roof below it......

And it is good

It's very simple and I like it

Great video!

I was changing an outlet and I have two orange wires. No black or white. How can I know wich one is the hot one?

Great video, TY!

this was an amazing video

We're going to need a new item line for DEI hires/workmanship quality for after 2020

im having the same problem. i did the same thing except that i disconnected the plastic pipe that goes into the wall and there was nasty black gunk in the metal pipe thats in the wall. i tried cleaning it out as best i can, but when i put everything back together the water started backing up after about a minute or so. Any advice, need a lil help

👍👍👍👍👍

Thank you so much! I have these scrub pads in my kitchen so I'll be fixing my down spouts today. Simple & inexpensive fix fast!

This is an epic example how construction goods is totally lack of renovation and competition in the west. Imagine if this happens in China, a downpipe with built in noise cancelling will be everywhere the next day, so ubiquitous that if without you wouldn't be able to sell any anymore.

Thank you!

How much to charge for it

Reverse polarity....that's funny....so which wire is the negative and which wire is the positive?

At 2:40 Remember *black to brass to save your ass*

Fun Fact: you can use Plumber's Putty on a wet car to deep clean it. I always use it before waxing. Check youtube for tips.

Is this code for US too

Great video, thank you. I have a question/situation. I live in an older/1950's home. I have a receptacle/plug that i want replace. I got it pulled out of the wall (yes the power is/was off), there are 2 white wires and 2 black (not sure why there are 2 of each). The 2 white were attached on the silver screws on the left side, the 2 black wires attached on the right side. I always take pictures BEFORE i do or undo anything for reference. Now here is my issue/question, once i reinstalled the new plug, with white on the left, black on the right, my little tester is reading "hot/neu reverse". Now I'm no electrician, but isn't the white wire suppose to be neutral and the black hot/active??? Should I switch the white the the chrome and the black to the silver to correct this issue?

Good Job! Thanks

Toomuchtalkjustdothx.

Hi I need help with my kitchen sink

Why is the screw holding the drain on an angle? Drain sealing also installed improperly. Did not deburr his saw cuts, forced joints together. Please, consult a plumber before making a video. Let’s teach best practices.

My P trap is clear and my pipes are unclogged, yet im having issues draining after laundry cycle… the water backs up and very slowly goes down… how do i speed this up ?

Excellent. Thank you so much. I’m 66 in a condo they want 1350 to remove the one I have. Absurd ! Especially now that I saw your great video. Thanks for taking the time to make that. However. My dishwater clogged at the same time. Will removing the GD , then allow the DW to finish draining ? It seems like is the GD was clogging my sink, that removing it would take care of everything ? If you know of another video to explain that please leave me the link. Thank yous SOOO MUCH

Awesome video, merci beaucoup!

Hiii...the bathroom sink is my house is clogged and after watching your video i tried to fix it but i couldnt unscrew the stopper....what do you think i should do?

What I don't understand is why I gotta do this every 4-6 months. The pipe keeps getting clogged up with nasty looking stuff

Good info. I would like to see how you cover the french perimeter drain (gravel, dirt, fabric?) and finish the whole job. Why does the water end up in a sump rather then being drained to daylight?

Usually insurance companies don't look inside walls or even open boxes

This is why we have arc fault protection today

Whew that is an old one

Other question: When replacing an outlet, if the black and white wire is put on the wrong sides, what will happen?

Those screws are driving me a bit nuts.

Do you have to do this with copper clad aluminum? Mine house was built in 1971 and it appears to have copper clad aluminum. I cut the copper colored wire and it looks silver inside.

Great advice, thank you sir ! 😎👍

When you installed the new drain, you put the plumber putty on top of the rubber gasket and paper gasket. That rubber and paper gasket actually gets installed under the sink and only the putty should be on top between the new drain and the sink.

I did this without the glue and they did indeed come out and that maddening sound started again. The down spout is already installed though, os I may just have to wait for a dry day and go up and glue it in up there. Will make note of the right kind of glue to get so I can get it soon at the local home depot. I used plastic mesh scouerers though, wondering if I should buy these more standard scouring pads.

worked very well! thanks! can sleep peacefully now!

😉👍🏻

Does a reverse ground on a surge protector always mean that it goes to the plug GFCI outlet would that be where I would look or is it possibility it could also be somewhere else

Hi , I noticed the Red wire from the fan switch is tied with Hot wire (black) from the source... Is it OK if I switch it the other way around?..I mean black from the source and black wire from the fan switch?