Видео

Rec is 15-200 which doesn't really mean anything these days. You can push these plenty loud with nearly any receiver on the market.

If things don't work after you get a new modem, you may need to re-network your Sonos ecosystem if the SSID/PW are different (this is the same with any network-attached device). If the SSID and PW are the same, you may need to power-cycle the Sonos devices and this may make them recognize the new modem.

Did you get a new modem from them? If not, who is the provider?

I totally agree Mario. I just spent hours trying to add a 2nd sonos speaker and now both sonos speakers fail and the latest sonos app fails to open on my iphone! This guy's video is useless too!

Yep once these are all functioning again both my systems will be up for sale .

Update your phone, update Sonos, power-cycle both and try again.

I have the same issue today . My era 100 mini sub and one sl's are all history . Neither Android or Apple work . All resets and updates done . Totally over all of this

@@mikeelkios436 What kind of router are you using? Sonos definitely floundered the app initially BUT we install Sonos every day and we aren't seeing these problems. What kind of router are you using and do you use Sonos in multiple locations or households (ex: work, friend's house, etc.)?

Like and subscribe and you should get the word once we get a chance to cook it up. Thanks!

Did you just change the password OR did you get a new router/gateway and you are using the same SSID and a different password? If you got a new router, it could be multiple things. If it is the same router and you just changed the password, roll back the firmware if a firmware update was done on the router. If you are 100% that the router wasn't updated and it is the same piece, factory-default the LSX II. This should work.

@airetheaterdesigns I did a password change and I already did a factory reset several times, without success !

My problem is finally solved after a few weeks, thanks to a comment found on Reddit. Here is the alternative procedure for connecting LSX II speakers to wifi when it is not/no longer possible to do it directly from the KEF Connect application. Connect the master speaker to the box using an Ethernet/RJ45 cable, locate the IP address of the speaker from the application then connect to it via a browser (IP). From the page that appears, go to the Network Settings section and the Wireless Settings subsection. Select the 5Ghz network (for my part) and enter the wifi password. I stayed in DHCP. Once the connection has been successfully configured, you can unplug the ethernet cable then activate the wifi connection from the home page of the mobile application.

Actually, there’s about 1 billion bytes of info. History, build design, sound quality and what you’ll hear, difference between streaming platforms, difference in the DSP and how that relates to different speakers and the room, difference in the sound calibration systems, etc.

Which ones did you listen to?

Bing Bang BOOM! Glad you're back-in-business.

same- trying to decide

There should be a vertical strip with all the options. You are trying to use RUclips...not RUclips TV...correct? If so, you may have an ancient Apple TV that no longer supports RUclips (replace it) OR try deleting and re-adding the RUclips app again. One of these two options should get you rocking.

So Cal

It definitely helps when your ears are working and you can hear. Good luck!

They are as different as can be. See our reviews on both for more detail. ruclips.net/video/hHeiIQFcpx4/видео.html ruclips.net/video/1E-SdmgqNYI/видео.html

No real update aside from they rock and do a much better job than the PRO6Es in many regards, ESPECIALLY in larger homes where there may be roaming during video calls, Zoom, etc.

@airetheaterdesigns sounds great! Mine come tomorrow. 3100 square foot home. Couldn't decide between 2 or 3 so I just went with three but better safe than sorry I guess. LOL

I agree. No more 96 ounce coffees for that guy.

Loved your TV show...you were the star.

Nice! Glad you're back in business.

What the model number of the TV?

UA43T5450AKX L

@@s.n.mohanty3620 The above is for US models. It may be different for international sets. I would check the manual or check with Samsung tech support in that country.

We are too! Stay tuned as when we get a chance, we'll be testing them out and doing a full review. We are elbows-deep in installs at the moment so it may be a few weeks.

@TexSupport i know. From the little info I've looked up, the abyss is smaller, yet more powerful? Id love to hear how they compare

Fortunately that's where we come in as long as people are in the So Cal area and have $$$.

Turning Dolby off won't affect vocals. It will affect the rear effects (changing from stereo and full-range to a limited band and single channel). However, the effects on the center will be unchanged.

Thanks for chiming in.

Nice! Glad you're rocking again.

Good eye...you're right.

@airetheaterdesigns I am looking to buy KEF Q950, what is your opinion compared to R3 sound quality?

Thanks for reaching out. I would see IF there is GB service available first. This might bump up your speeds with the existing system. However, the Max 7 will absolutely make for faster speeds, better performance and is more future-proof. You wouldn't want to have 7 Eeros going at once. Too many APs is a bad thing. However, if 4 Pro 6e units cover your place now, you'll most likely find that 2-3 Max 7s do the job. This is dependent on locations of appliances, mirrors, tile, electrical, # of stories, build quality, etc. BUT long story short...2-3 would work. You might even eplace JUST the gateway with a Max 7 and then use 2-3 of your existing ones. Please consider getting them through the link below if you consider upgrading (see if GB is available first)...they are on sale now!!! amzn.to/49yKcM5 Thanks!

Nice! We're glad you're back in business.

Thanks dudealog!

What kind/model of speakers do you have and what configuration (2 channel, 5.1, etc.)?

माझ्याकडे 6.5"Alpine चे दोन टॉवर आहेत,फिलिप्स चे एक 8"आणि एक 6.5" दोन टावर आहेत, आणि पायनियर चे आठ इंची दोन टॉवर आहेत

I have an Alpine 6.5" two speakers two towers, Philips one 8" and a 6.5" speakers two towers, and a Pioneer 8" single speaker two towers.

I like 5.1 chanal av receiver

@@lgmunde Yamaha RXV6A

Thanks for the good word. We have a newer video that we will be releasing soon that details some of the nuances of the new app. In the interim, are you using Sonos anywhere else? If you are using another Sonos system elsewhere (work, vacation place, etc.), you will want to choose "Go To System Settings" and then "Join This System" after you see "System not Found". If you aren't using Sonos elsewhere, reserving the MAC addresses instead would be a good choice. Let us know if it helps!

@@airetheaterdesigns I am not using the Sonos anywhere else - just my house. 6 rooms, 11 speakers. I reserved the MAC addresses (it required typing in the IP address, which I had). No change to my problem. I called Sonos support. They concluded it is a router issue. Specifically they have had several other customers having this problem and they all have an Xfinity (Comcast) XB8-T. They told me to work with Xfinity. That will be my next step. I had problems in the past with this router and eero. Xfinity helped, but it may be that I have 3 networks enabled (2.4GHz, 5, and 6). It just seems odd that this router worked fine, until a short time ago. Thanks for your time!

@@airetheaterdesigns Sonos Problem: Sonos could not join my network from either my Sonos MacBook app or my iPhone Sonos app. “System not found on my Network” Things that didn’t fix the problem: - Deleted network and reinstalled many times - Deleted Sonos app on MacBook and iPhone 13 and reinstalled many times - Reset Sonos app on iPhone many times - Restarted Xfinity XB8 Gateway via Xfinity app and by unplugging many times - Split networks with the Xfinity app many times -Added static IP addresses within eero app (Settings:Network Settings:Reservations & port forwarding:Add a reservation: (I added all my Sonos devices) 2 Things that fixed the problem 1.XB8 Gateway Bridge Mode needed to be enabled (login 10.0.0.1). (Ironically, in May a live Xfinity tech disabled Bridge Mode and told me never enable Bridge Mode) 2. iPhone 13 Wi-Fi Assist needed to be turned on even though my iPhone was sitting right next to my Gateway (iPhone:Settings:Cellular:Scroll down to Wi-Fi Assist:Turn on) 3. Although adding static IP addresses did not fix my problem, I left them as static in the eero app I received excellent support from the Xfinity Forum folks via DM and from the eero technical support group. In addition, Sonos support also provided assistance. It was the Sonos Community that suggested the last fix i.e., turning on Wi-Fi Assist. I thank them all for patiently working with me. And a shout out to Aire Theater Designs for suggesting the static IP addresses (search How to fix Sonos). I, like many other Sonos users, was ready to scrap Sonos. But now that it’s “back to normal” I’m glad I persevered. I just wish Comcast would have credited the $100 service visit since they disabled Bridge Mode in May that contributed led to this problem.

I too, share your cynicism...

Thanks for the good word. NOTE: We have had multiple RXV4s crap out on us. We also saw this with the previous model (RXV485). We have not had problems with the RXV6 or the models above this. I don't know why this is as there isn't anything noticeable that would point to this BUT something to keep in mind.