Видео

Thank you

Fast forward to nearly the 15 minute mark to get past all the talking and get to the install

I was there yesterday. I was wanting a piece of Gilsonite for my collection. The American Gilsonite factory was secured like Ft. Knox. I think I saw where you were yesterday, but I didn't the time to get my drone out. Did you ever see any raw Gilsonite somewhere so that people could get a piece for a collection? Thanks! PS: coordinates? PPS: Did you or have you ever traveled over CO-139? Bikers would love it. I was white knuckeled going over it on my return trip at night!

Cheers your still champion. Thank you

Sweet truck!

If you want a little more out of these for heavy loads you could install the coachbuilder 1.5” extension from Ekstrom Design

Thank you. I just bought a 100 series and i need to do this.

I did my dad suspension with moog and after market parts for his 89 yota about 7 years ago its all giving out already. Doing mine in the coming months and sticking with all oem

Thanks for the info! I have a 94 FZJ so I understand

So I went ahead and dropped the front differential by removing a four bolts holding the crossmember, and then the two 19 mm bolts that attach the front differential to the frame. I didn't disconnect anything else, and used a jack to gently control the fall, in the oil pan just slipped straight out the back, not the front. And that was without removing the oil pickup.

These steps are hot garbage lately. I bought the XL's 2 years ago and 3 of the 4 motors stopped working, Good luck getting new motors under warranty by AMP Research, they will give you a run around asking for video proof then no answer.

What’s the purpose of the adjustment? Just to make it less noisy and annoying? Lol

At 3:56 not a homestead, part of the old camp used to house the miners since the site was so inaccessable. (PS Back roading? Always carry a small tool kit.)

Did it end up being an electrical grounding issue and not the starter …. That was what I encountered.

Figure I’ll add this, after about my 5th time re-watching for different tips you give and showed. My one bit of knowledge to share, is that it is usually ideal to wear gloves when handling bearings. The oils, sweat and crap from our hands can cause damage/eat into the coating on the surface of the bearings. Other than that, great video sir, helped me out a bunch🤟🤟.

Watching this thinking about those who don't even know. I can't imagine a better vehicle when everything is considered.

Great video, thx.

What’s the name of that organizer you had on your dash?

Same issue.2019 Toyota Tundra. My battery was almost 5 years old so I changed it and the issue went away. Try a new battery before you tear your truck apart. Just sayin'.

Thanks for the info. I am about to buy a new belt and now I will buy OEM belt from Toyota.

Do you know how to fix the wedge of the running board I have Yukon 2014

Original engine on the FJ60?

I think you might have the wrong length springs. That shackle angle doesn't look right

That idea for raising the upper control arm with the jack in the truck is genius!

Arguably the mostly reliable 98hp ever made. 😂 I've had several trucks from an 83 to a 92 and wasn't nice to them and they never let me down. One pieced together, factory turbo version was the most fun. 😁

Hi It s 4,2 or 2,8 ?

Nice old troopy. Are they bright rear lights or was he on the brakes the whole vid

Good job my friend I look your video next week I rebuild my 1994 oh, this is a great video. I have some idea from you.🙏

Bucket list

Chained up darkness lol😅

🤩 looking good, 70Toopy & 100do making the Utah outback drive about 🤙🏼

One of the best engines in the mid 80's to early or mid 90's..... FKKIN AWESOME ENGINE. Toyota all the FKKN WAY. Great video!

Mine make the same clunk sound when upward motion stops. I’ve seen where the step motor operation is quiet on other trucks.

Paid over 800 to get mine fixed and they still have my car been holding it for weeks

هل تعلم اين اجد التروس الداخليه لمحرك دعسه يوكن دينالي ٢٠١٤

Quick question, at the end when you were talking about how your wheel was turned one direction too much. Why did you turn the steering wheel? Shouldn't the steering wheel have been locked at dead center? Also, when I get the new steering rack, do I have to make sure it is dead center or does it come locked at dead center ready to go back in assuming the steering wheel is at center?

Thanks man! One of my motors took a crap after a month! Got the warranty motor back, no instructions, nothing, but the motor and hardware. Anyway, thanks dude, I took it apart easy enough, but the KEY, was cycling the motor to match the screw holes,,, that sucked, and it would have taken me for forever to figure out, still took about 15 minutes. I was installing it with the step down and the door OPEN, with the motor cycled down,, Magic I can't thank you enough!!!! 🤙🤙🤙

Excellent video..the drivers side on our 2019 Jeep did pretty much the same thing. Except the step is stuck in the up position..

Very good video, thanks for sharing. Covered lots of detailed information.

Gracias por tu video. Ahora puedo hacerlo yo mismo desde mi casa

radiator have top plastic cover and under ? or this is yellow brass ?

Great video, very helpful thank you sir

Where can I get this exact lift kit?

How did you get the tire jack to stand so stable and not slip off and cause the top plate to upper control arm to smash down 😅

When u ramble i move on

The spur gear that sticks out the motor assembly is what broke on mine because one day i opened my door and there was pieces of gear on the floor. I’m not sure if I have to replace the whole motor assembly.

Mine is stuck inboard. How do I get it out?

I have 60.000mile 60series Australia still has original plastic from dealer on seats even sparewheel sticker bottom of tailgate

If I can blow it up can I bring you back lol@-)---

It's a easy fix just the engine