I wanna thank you for making this videos and show me a lot to hold my skills as a sharpener and this technique that you were using is amazing the burr on the knife. It’s now on its Apex and I don’t have to use a polishing stone and it’s really really sharp thank you appreciate it. Keep making good videos.
Thanks! So you're only using the finishing stone for the single stroke polish/deburr? I thought that in the stone progression, you would sharpen as you did on the 1k, possibly deburr, then continue on to regular sharpening motions/burr formation with the higher grit stone, then deburr/ strop again after that. Is that not necessary? You dont use the higher grit stones for their own burr formation / sharpening like you did with the medium stone?
Great video! I have a noob question, I just learned to create and feel for a burr. I am using a shapton 1k on carbon and stainless. I tried a few different methods of deburring. Single strokes on 1k, single strokes on strop and single strokes on a honing rod. For whatever reason, the honing rod seemed to work best for me and cut paper the best. I’m tempted to keep doing this sense it’s works best from what I’ve tried, but I have a feeling it’s not correct, sense no one else does it. Could you explain why it’s not correct? I’m off to try your deburr methods now.
You can definitely take the burr off with a ceramic rod. I’ve done that before myself. The methods I showed here will leave you with a sharper and longer lasting edge, but they also take a bit more work to learn how to do well vs using a ceramic rod.
I just finished sharpening a knife and discovered using a diamond rod worked better than the diamond plate. I deburred (stropped) on my leather belt, but a fine ceramic rod works well too. I think whether it’s a rod or a stone doesn’t matter so long as it works for you. The key is which one helps you maintain your sharpening angle and gets you results faster. Having to keep working at it is time consuming but beneficial to discover the method that works for you. A carbide V sharpener should only be used to recut a severely damaged edge because it removes too much metal for regular sharpening.
You can’t get one on both sides at the same time, but it is important to make sure you can feel the burr the full length on both sides, one at a time, after sharpening the opposite side of the knife. Otherwise you can have a full length burr on one side, but not actually have a clean bevel all the way to the edge on the other side.
You seem to be holding a different angle while de Burring then when creating the burr. So do I need to hold a steeper angle de Burring then when sharpening?
I’ve tested it both ways, and at least when using a softwood like I am, I actually find the pulling the edge through the wood cross grain works better.
I can tell this guy knows exactly what’s up by looking at his sharpening/deburring strokes. Rhythmic, precise, and great form. Cool video!
Great video, super handy technique with the wood for deburring.
Thanks. I’m glad you found it helpful.
I wanna thank you for making this videos and show me a lot to hold my skills as a sharpener and this technique that you were using is amazing the burr on the knife. It’s now on its Apex and I don’t have to use a polishing stone and it’s really really sharp thank you appreciate it. Keep making good videos.
Thanks! So you're only using the finishing stone for the single stroke polish/deburr? I thought that in the stone progression, you would sharpen as you did on the 1k, possibly deburr, then continue on to regular sharpening motions/burr formation with the higher grit stone, then deburr/ strop again after that. Is that not necessary? You dont use the higher grit stones for their own burr formation / sharpening like you did with the medium stone?
pekná práca
Thanks!
What knives do you use for experimenting?
Thanks mate 👍
Great video! I have a noob question, I just learned to create and feel for a burr. I am using a shapton 1k on carbon and stainless. I tried a few different methods of deburring. Single strokes on 1k, single strokes on strop and single strokes on a honing rod. For whatever reason, the honing rod seemed to work best for me and cut paper the best. I’m tempted to keep doing this sense it’s works best from what I’ve tried, but I have a feeling it’s not correct, sense no one else does it. Could you explain why it’s not correct? I’m off to try your deburr methods now.
You can definitely take the burr off with a ceramic rod. I’ve done that before myself. The methods I showed here will leave you with a sharper and longer lasting edge, but they also take a bit more work to learn how to do well vs using a ceramic rod.
I just finished sharpening a knife and discovered using a diamond rod worked better than the diamond plate. I deburred (stropped) on my leather belt, but a fine ceramic rod works well too. I think whether it’s a rod or a stone doesn’t matter so long as it works for you. The key is which one helps you maintain your sharpening angle and gets you results faster. Having to keep working at it is time consuming but beneficial to discover the method that works for you. A carbide V sharpener should only be used to recut a severely damaged edge because it removes too much metal for regular sharpening.
What kind of don’t get is how you get a burr on BOTH sides?
The metal either bends one way or the other does it not?
You can’t get one on both sides at the same time, but it is important to make sure you can feel the burr the full length on both sides, one at a time, after sharpening the opposite side of the knife. Otherwise you can have a full length burr on one side, but not actually have a clean bevel all the way to the edge on the other side.
You seem to be holding a different angle while de Burring then when creating the burr. So do I need to hold a steeper angle de Burring then when sharpening?
Some say double angle some say same one...
Micro beveled it
What grit is the finishing stone?
Anywhere between 4K - 8K
Better to pull the edge through the end grain of the wood. Thanks for the vid!
I’ve tested it both ways, and at least when using a softwood like I am, I actually find the pulling the edge through the wood cross grain works better.
So if I got this right, you deburr after polishing the edge with your finishing stone?
You deburr with the finishing stone.