Это видео недоступно.
Сожалеем об этом.
How To Set Tension On Janome HD-9!! (PLUS FIX)
HTML-код
- Опубликовано: 7 авг 2024
- In this video we go over how set your tension on a Janome HD-9 sewing machine/troubleshoot.
Don't forget to Subscribe for weekly content!!
-Shop janomejunkies.com/ Janome Machines and much more!!
Join our Facebook group (support/share/enjoy) :)
/ 853970988095184
If you’d like to call and talk Janome machines contact us 813-376-5015 (anytime) 813-661-9000 (between 10-4pm EST M-Friday)
Shop our Fabric selection and notions here
gigisfabricshop.live
Thank you for watching! DONT forget to LIKE, COMMENT, and SUBSCRIBE!
New videos every Sunday 5PM EST!
#janome #janomehd9 #janome9400 #janome9450 #janomem7 #janome500 #janome500e #janome500 #janometravel #janomesewing #sewingforbeginers #janomebagmaking
I believe you've just saved my HD9. It's been 2years I got it and work every day with it, and got tension problem for few month now. I sent it to check up but came back with no change. The last minutes on your video were my solution🙏 Thank you so much !!!!!
You absolutely saved my sanity today. Have been struggling with my machine to no avail. I tried what you just showed and now all is well. Thank you so so much you're a life savor.
I'm so glad I found this video. I just got my HD9, and tension is always a scary subject.
I am glad it helped :)
This my go to video when I need a reminder what to do when I am not getting dinosaur humps.😊
Thank you - Ive been using my new HD9 for a couple of weeks and for the first time realised my bobbin wasnt clicking in as I was holding the latch open, and Ive now been able to set the tension correctly! Please keep making little videos like this on every aspect of the HD9 which is a great machine and now my tension is perfect, I can say I am extremely pleased with it.
Great to hear!
Moi aussi,je faisais comme vous,en regardant la vidéo j’ai compris.
You Janome Junkies are the best! Bringing home my new HD-9 and unboxing it was a little overwhelming 😅. Research pays! I found you guys on RUclips and you saved me a massive meltdown! Thank you!❤
Your video has lowered my blood pressure. I can’t thank you enough
AWW! I'm so happy to hear this :)
Thank you for the incredible video!! I hope you make more on the hd9
Thank you so much for clearly explaining how tension works! I have finally solved my problem for J-HD9-Pro problem. I really cannot thank you enough for your clear instructions on how to solve tensional problems! A huge shout-out and Kudos to your great demo! Wonderful!
Great to hear! You're welcome.
i have had extreme bunching on my lower thread. This video has been extremely helpful. I feel like i know my machine so much better now.
Thank you so much for such great video! Crystal clear!
I love the dinosaur hump reference!
Thank you for this tutorial, it helped a lot.
Thank you for this video. Perfectly explained.
You're very welcome!
Thank you, you saved my life.
thank you so so much. you are speaking very clear and excellent explanation 👏
Thankyou Thankyou Thankyou. Was having so many dramas with huge loops on the underside of my fabric. Removed the spring as you suggested and voila, perfect stitching.
You’re welcome 😊
That was very helpful. Thank you so much.
You're very welcome!
Great informative video. Thank u so much 💓
Glad it was helpful!
This has to be the clearest video I have seen re tension on the HD9. Any chance of a video about changing the foot pressure too please?
Just turn the top knob. Above the pressure bat. Down. More pressure. Up less pressure. Easy.
Thank you thank you!
This video is my stitch bible.
I'm glad you liked it :)
Nice job. I will send a tension screwdriver for you. Good idea. Advise customers to have two Bobbin cases. One for 100 percent polyester,,and one for thick thread,,,and mark the thick thread case with nail polish.
Thank you. I always forget which item does what.
Hi great video, my issue is I’m using tex 40 but I can not get my tension right at all. My top stitch is sort of at an angle and not great underneath … any ideas please as to what I might be doing wrong. Thank you
I just finished two bags using Tex 45 with zero issues and beautiful stitches. I changed my needle and wound a new bobbin and started another bag, and now I’m getting skipped stitched. I rethreaded the machine and changed the needle again and still getting skipped stitches. I’m at a loss as to what changed. I’ve had zero issues up to now. Could the newly wound bobbin cause an issue? I have a V1 and hate the half bobbin case. Unless I hold the lever, the bobbin falls out and it’s never clicked upon insertion like yours did.
Enjoy your videos, very helpful and easy to follow. Question when using a Heavy thread like Tex 45 do you still need to run same thread in Bobbin or is better to go with a light wt thread?
You should run it in both. But you can run something lighter, you'll just have to play with the tension.
Having trouble understanding the “numbers” on the top tension. Demonstrator turns knob multiple times and I don’t see how that corresponds w/ a number.
I have seen videos where a liquid is applied to faux leather/vinyl by brush prior to the HD9 sewing with its regular foot - I am guessing it is to stop the foot sticking but what is the liquid?
What do you need to do when the fabric is puckering
Yes how do you set the tension on a Janome for polyester? My manual is in French only.
Hi David apparently No one is able to explain what correct tention looks like. Thank you I was able to correct two machines. I like the dinosaur back explantion.
You're very welcome :)
Hi I got janome HD 1000, it's brand new, never been used. Kept in a storage, no gunk no rust, but it's jamed, not able to move even millimeter. Hand wheel is stuck, jammed.
What a handsome chap
Thank you 🥹😊
What about the pre-tensioner?
A Memory craft 6600 can you help on this Model?
What can I do to help with loose bottom stitches when using the 1/8” janome foot? I get loose stitches and nesting as soon as I switch to it. When I change back to the foot that came with the machine it’s fine
What foot exactly are you using because Janome doesn't have a 1/8 foot. Do you mind attaching a link so I can see what youre talking about.
@@janomejunkies2044 apologies- I am just seeing your reply- thank you- this is the foot I bought: www.poconosewandvac.com/products/presser-feet/janome-narrow-straight-stitch-foot-1600p
Janome Narrow Straight Stitch Foot (Commercial Shank) 767406019
do you have suggestions for a narrow foot to help with guiding me for seam allowance for topstitching? I don't like the zipper foot for the thicker vinyl.... so I like to use it for zippers as well. THANK YOU for your help
Using a Towa Gauge, can you tell us how many millinewtons (mN) or grams you are using in the Bobbin to get that balanced stitch? Also, what weight or Tex is the thread is in the Bobbin and the Top? And lastly, can you do this test on just 2 layers of cotton with 40-50 wt poly thread or Tex 30 thread?
40w glide thread :)
What is the tool called you are using to adjust the bobbin please?
Small flat head screw driver.
Where can we purchase the T shaped screwdriver? That would be perfect to keep with my machine. Thank you
jukijunkies.com/product/t-screw/
Can you talk about the 1st knob at the top? The where you thread the machine first, it’s small and sticks out
What would you like to know :)? We recommend having it flush with the screw... You can tighten it down to have shorter thread ends when you use the auto cutter.
@@janomejunkies2044 what does it do?
What is its purpose? Does it affect the tension?
@@annieconstant Sub tension knob, its main purpose is to help with specialty threads :) It wont affect your tension much.
What could be the cause of a random loop in the bobbin thread? It looks fine everywhere, but then there’s just one little random loop? 🤔
Possibly a bad needle :)
Can you show the proper tension when using vinyl as if you were making a strap which would be 4 thicknesses of vinyl
Tension is not universal to all HD9s this varies from machine to machine. Knowing how to set the tension is important and in this video it should help explain how to do so :)
I have a join request that's been pending for the janome junkies Facebook page for several days. Can you guys help?
I just accepted them all today. If you're still not in try again and ill accept it :)
Thank you for the incredible video! I hope you make more on the hd9
We will!
What is the tool called you are using to adjust the bobbin please?
T-screw. A small flat head screw driver works just fine though.