It only comes with the 2 sprayers and alwsys hold the water nozzle hand on or you will burn out the motor. Thats for any washer, hot, cold, small or large.
@@seungk8607 when you want to run a washer hold the nozzle so water comes out before you start the engine. It will only trickle out, but when you start it the pressure will come. Never let unit run with jo water coming out of spray nozzle.
Not sure if anyone cares but if you are stoned like me atm then you can stream all of the new movies and series on instaflixxer. Been watching with my girlfriend for the last weeks xD
Does the water get steamy hot?? I have grease and grime on my dumptrucks that needs that type of temperature to break the grime down. Any info will be greatly appreciated!
@@rushedscheduledfun3963 Hi, are you still facing the issue with the battery? Ours keeps on getting dead in 2h every time even when we charge it to 100%. We don't know what is causing the problem, brand new machine.
@@beans.for.presidentI think the problem on mine is maybe the key left in the on position. I use mine only every few weeks. So I turn off the gas valve and let run out of gas. I think I leave the key to on and the knob burner on.
hope you have better luck with that machine than i did. they only sell that particular model at auctions. mine only had a couple tips as well. what part of ohio are you from?
Very good Machine !! I have a 2012 model I did some modifications to mine ,,, I replaced the unloader , put a regulator/unloader on it ,(it gives you time to move hoses around and re-curculate water without over-heating the pump ) also put a ball valve on the pump to take P.S.I. pressure off the pump for re-starting , I also eliminated the soap induction, and just use a foam cannon ,(less restrictions) they are made in CANADA and as far as odering parts ,,, believe it or not I've ordered them and received them the next Day ( even during C-19 )
So far it is nice Only part that I am not sure of is the off brand engine . It looks like a Honda from a distance. Looking into getting the rotating nozzle and the sand blasting kit for it. Let me know if you buy the pressure washer. Thanks for commenting and watching
@@rushedscheduledfun3963 They are $2,750 from Magnum if you go to their site and you may also get the accessories that you are missing. Go to AUTHORISED DEALER AmeriRent Equipment We are authorized dealers for all Easy Kleen power washing equipment. Check out our video for an overview on this Magnum ...
I wonder why are so many of these sold on many auction sites???
“So you can probably smell it….it’s a new motor…”. No, we cannot smell it, Cleetus.
Do you need to keep the water flowing? Or can it sit for a couple minutes?
It only comes with the 2 sprayers and alwsys hold the water nozzle hand on or you will burn out the motor. Thats for any washer, hot, cold, small or large.
Hi Joanne. What do you mean hold the nozzle hand? Could you elaborate
@@seungk8607 when you want to run a washer hold the nozzle so water comes out before you start the engine. It will only trickle out, but when you start it the pressure will come. Never let unit run with jo water coming out of spray nozzle.
How's the machine now
How has the unit held up and have you used it much?
You can buy the tips anywhere they're not particular to brand just psi rating
Not sure if anyone cares but if you are stoned like me atm then you can stream all of the new movies and series on instaflixxer. Been watching with my girlfriend for the last weeks xD
@Jax Bradley Definitely, have been watching on instaflixxer for since november myself :D
Does the water get steamy hot?? I have grease and grime on my dumptrucks that needs that type of temperature to break the grime down. Any info will be greatly appreciated!
Yes it gets up to 220 degrees and it’s constant, it will be the smartest purchases you can make😁
I’m looking at one on market place do you recommend this exact brand and model?
It is ok. I bet there are better ones. Good luck
U can buy all kinds of “tips” for it…my TroyBuilt had only 3…got 2 more(mid range)@Lowes.
Como enciende la caldera
just wondering what you paid for this I will be going to an auction this week and would like to know how much to bid it is also brand new
About 2k. FYI Auctions charge a fee on top of it.
Yeap 2,000 bid plus the 7% tax and 10% of fee
Same here snagged 2. Sold one for 2750.00 kept 1 for personal use. Bout both for 2k each
what brand of pump is on it?
Just looked at the pump.
Easy-Kleen EK440
Hope that helps
Just bought the same one and the burner is not turning on any suggestions?
I have not had problems with the burner. Just o rings in the handle.
I would start with connections. And work backwards from there.
Good luck.
Hey check your battery. I just had a dead battery and pull started it. No heat. Charged the battery and then start working
@@rushedscheduledfun3963 Hi, are you still facing the issue with the battery? Ours keeps on getting dead in 2h every time even when we charge it to 100%. We don't know what is causing the problem, brand new machine.
@@beans.for.presidentI think the problem on mine is maybe the key left in the on position. I use mine only every few weeks. So I turn off the gas valve and let run out of gas. I think I leave the key to on and the knob burner on.
Hey, are you still looking for a fix? I just bought one with the same prob and found the problem.
At What auction did you purchase it ?
Yoder auction in ohio
@@rushedscheduledfun3963 is it a website?
And thank you very much for sharing the information
hope you have better luck with that machine than i did. they only sell that particular model at auctions. mine only had a couple tips as well. what part of ohio are you from?
Just outside of cleveland to the west
What happened to your hot water pressure washer? Is there a fault in the machine that I can avoid having?
Very good Machine !! I have a 2012 model I did some modifications to mine ,,, I replaced the unloader , put a regulator/unloader on it ,(it gives you time to move hoses around and re-curculate water without over-heating the pump ) also put a ball valve on the pump to take P.S.I. pressure off the pump for re-starting , I also eliminated the soap induction, and just use a foam cannon ,(less restrictions) they are made in CANADA and as far as odering parts ,,, believe it or not I've ordered them and received them the next Day ( even during C-19 )
Good information
I was thinking to buy same one
So far it is nice Only part that I am not sure of is the off brand engine . It looks like a Honda from a distance. Looking into getting the rotating nozzle and the sand blasting kit for it. Let me know if you buy the pressure washer. Thanks for commenting and watching
Harbor freight and tools sells them tips too
Thanks. Never thought to look at HF
Paid 2000 for mine at the rb auction
You did better then me ! I think I cleaned up all my equipment that week I got it.
@@rushedscheduledfun3963 They are $2,750 from Magnum if you go to their site and you may also get the accessories that you are missing. Go to
AUTHORISED DEALER
AmeriRent Equipment
We are authorized dealers for all Easy Kleen power washing equipment. Check out our video for an overview on this Magnum ...
Are you down with the clown???
This is realy Heavy 400 Lbs , it cant be mobile ...
It rolls pretty well, maybe if you have a trailer to haul it. I kinda like that it is really hard for people to borrow the pressure washer
@@rushedscheduledfun3963 why I like share with my Neighbours , that is really nice
You can put it in trailer or high cargo van if you install the electric winch
Clean something that needs cleaning
Made in Canada with China parts