Thank you for showing our machine off - Update for 2017 Extra O-Rings are now included with all units! Also the vibration you are feeling at your wand might be due to your lack of flow to your unit. These Magnum Gold machines are 3.5 GPM and if the flow is restricted it causes the pump to cavitate which you would feel at your gun while washing. Again thank you for showing off your unit! It is always great to hear positive feed back. - Madison (Marketing)
No problem.... Yes the VIbration is bad after awhile.. but I agree with you I am not getting enough flow from the house...Its always been a problem at this house for water GPM..I will be making another video of me using it at my own place which I have much better flow.
Get a 4000 psi ball valve.Put right after the trigger handle,then tie the trigger open.Use the ball valve to turn the wand off.That will help your hands too.I cleaned hog houses for over 40 years.When I got a ball valve life cleaning with a high pressure pump got a lot easier.Thanks for your videos.
the heat is melting the inside of your hose and the melted rubber is clogging up your tip. i was having the same problem. you need to get a new hose rated for 300 degrees.
That honda has engine oil in it also. Just a suggestion, its your equipment and you can do what you want, but you might want to let it warm up a little before running full throttle with a load on it.
I was to cheap and bought a cold water pressure washer paid $1800 thought I would just hook it up to the hot water heater, but when I got home I read that you can't run hot water in it. So my cattle liner doesn't get too clean with cold water. Look forward to the drone vids
AndersonCattleCo. you can rent hot water burners for pressure washers that connect to the high pessure line. The only think that sees the heat is the gun
I just don't know how you guys manage to work in the cold and white stuff like you do. Anyway another great video. Best wishes for 2017 - hope all goes well for you and yours. We don't get any of the cold white stuff here and it's Summer so we will be complaining about the heat and humidity. Cheers from New Zealand
Nice power washer most spars and handles are mad cheap on most models looks like you are missing the different tips for the sprayer but you can't go wrong with the heated power washer so have diesel fuel for the boiler and gas for the motor part happy new year bro
I wonder if you increased the diameter of the hose to the pressure washer if it would give you more oomph! I haven't a clue. Best of everything to you and yours for 2017!
we washed trucks when I worked in the patch I finished washing mine about ten at night next morning we had frozen brakes the boss had egg on his face on that one
Hey Tyson how do u like your muck boots i have a pare of artic pro and i have to stay moving or my feet freez in them do u have that problem to lol just wandering
Howdy, What horsepower & brand is that engine. And how many speed is the trans. on that Freightliner? Do you have a grain trailer for that rig? Nice truck for a farm. Good luck in fixing the brake lights. Have a great day.
Its a 15 hp...im not sure of the brand name.... Its one of those honda knock offs. Its a 10 speed auto with clutch. yes we have a trailer as you can see in some older vids
The motor on that washer is a piece of junk - it is a knock off of the Honda GX, save yourself some grief and buy the genuine Honda, it will run forever. Check out the NorthStar brand, they use genuine parts, not Cheap copies.
God bless you for working in that weather. Im from Michigan, now living in Florida. Don't miss the cold one bit. Great video!!
Its not so bad when your used to it
Boy now that is a hardy soul out there power washing in that temperature!!!
Thank you for showing our machine off - Update for 2017 Extra O-Rings are now included with all units!
Also the vibration you are feeling at your wand might be due to your lack of flow to your unit. These Magnum Gold machines are 3.5 GPM and if the flow is restricted it causes the pump to cavitate which you would feel at your gun while washing.
Again thank you for showing off your unit! It is always great to hear positive feed back. - Madison (Marketing)
No problem.... Yes the VIbration is bad after awhile.. but I agree with you I am not getting enough flow from the house...Its always been a problem at this house for water GPM..I will be making another video of me using it at my own place which I have much better flow.
Do you have a email I could message you at... I have a few questions
Yes its is service@easykleen.com email us with your questions and our service guy will help you out. Thanks!
Get a 4000 psi ball valve.Put right after the trigger handle,then tie the trigger open.Use the ball valve to turn the wand off.That will help your hands too.I cleaned hog houses for over 40 years.When I got a ball valve life cleaning with a high pressure pump got a lot easier.Thanks for your videos.
Good idea Stan
Great video Northern Farmer, cant wait to see some drone videos.
Thanks big d
the heat is melting the inside of your hose and the melted rubber is clogging up your tip. i was having the same problem. you need to get a new hose rated for 300 degrees.
nothing like a good bath
Been there done that! Need a rain coat and rubber gloves, better yet,,,,,,,Shawn.... oooh Shawn. Happy New Year to All!!!!
Hope you had a great new years Kevin
HAPPY NEW YEAR thanks for all the videos
Welcome
my wand is the only part on my pressure washer giving me trouble. yours is twice the PSI of mine.
Did you run regular water with those temps? Straight from the outside tap?
That honda has engine oil in it also. Just a suggestion, its your equipment and you can do what you want, but you might want to let it warm up a little before running full throttle with a load on it.
Lol it wasn't cold..it was sitting in a 23 degree shop..
Tyson another great production of what you have to do on the farm.
Happy New Year.
What battery was a perfect fit for the magnum gold can't seem to find one
Wish I had one of those!
They work great
I was to cheap and bought a cold water pressure washer paid $1800 thought I would just hook it up to the hot water heater, but when I got home I read that you can't run hot water in it. So my cattle liner doesn't get too clean with cold water. Look forward to the drone vids
AndersonCattleCo. you can rent hot water burners for pressure washers that connect to the high pessure line. The only think that sees the heat is the gun
Yea the hot water helps.... for our trailers you have to have a lot of pressure to clean them good
You can buy pro guns too. Just go to a shop that sells pro pressure washers. Yours looks the same as whats on my craftsman.
JCLawn51 Thanks I'll check that out.
Please tell me what unit and brand this is this is amazing...
Ezze kleen
I just don't know how you guys manage to work in the cold and white stuff like you do. Anyway another great video. Best wishes for 2017 - hope all goes well for you and yours. We don't get any of the cold white stuff here and it's Summer so we will be complaining about the heat and humidity. Cheers from New Zealand
I guess we are just used to it. Hope you have a great year to Ian!
Nice power washer most spars and handles are mad cheap on most models looks like you are missing the different tips for the sprayer but you can't go wrong with the heated power washer so have diesel fuel for the boiler and gas for the motor part happy new year bro
I have a lot of tips on my other power washer
Where was Shawn to help on the nozzle ? lol We are lazy, take semis to truck wash, $64 to wash semi and trailer... with spot free rinse to.. :)
He was running the bobcat cleaning the corral
Nice video.
Thanks Jan
nice washer, how do you keep it from freezing?
Dont stop for to long.... it wasnt that cold out today anyway
I wonder if you increased the diameter of the hose to the pressure washer if it would give you more oomph! I haven't a clue. Best of everything to you and yours for 2017!
That would help.... but the pressure pump also needs to be replaced
Can u do a video on your ski doo renegade 800 etec
austin lindsay I could when I have some time
does the trucks freeze before you get it in the,shop..love your videos HAPPY NEW YEAR
Oh yea shes got some ice on it... but its fine. Happy New Year Tina :)
Didn’t even use any soap? 😒
we washed trucks when I worked in the patch I finished washing mine about ten at night next morning we had frozen brakes the boss had egg on his face on that one
Yea they might be frozen but thats ok,,, they will thaw
Northern farmer we used cold water and the boss wouldn't let us drive them to dry em
Hey Tyson how do u like your muck boots i have a pare of artic pro and i have to stay moving or my feet freez in them do u have that problem to lol just wandering
They are good... but they wont replace a good winter boot
Howdy, What horsepower & brand is that engine. And how many speed is the trans. on that Freightliner? Do you have a grain trailer for that rig? Nice truck for a farm. Good luck in fixing the brake lights. Have a great day.
Its a 15 hp...im not sure of the brand name.... Its one of those honda knock offs. Its a 10 speed auto with clutch. yes we have a trailer as you can see in some older vids
Sorry, I was wondering about the engine in the Freightliner?
Mercedies 330hp
how the heck did your garden hose not freeze up?
It did lol.. You can see me at the start I had to thaw it out with the hot water that was left in the wand
I washed my truck and trailers yesterday but you will see on my instagram that it didn't last too long
Yea I just saw... Its always like that
You just replace the O ring. Not the whole piece not sure if that is what you meant.
Yea but now I have a spare to since they rust out
Yeah you deal with the salt/rust up north. I'm in Texas so I dont see it as much.
look, you missed a spot.
I did
Great wash job. Give me your address and I'll drop by to wash my van.
Darrel S your a fuckwit
This doctor is nuts lock this 2 people up
What are you talking about?
The motor on that washer is a piece of junk - it is a knock off of the Honda GX, save yourself some grief and buy the genuine Honda, it will run forever. Check out the NorthStar brand, they use genuine parts, not Cheap copies.
So far so good...I have 2 washers with these motors and they run fine