Toyota RAV4 (2019-2024): How To Hardwire The Dashcam To The Fuse Box?
HTML-код
- Опубликовано: 7 мар 2020
- In this video, we will show how to hardwire the dash camera to the fuse box in the 2019, 2020, 2021, 2022, 2023, and 2024 Toyota RAV4.
Watch how we did the previous installation of the dashcam without hardwiring:
2019 Toyota RAV4 - Installation Of Dashcam With Hiding The Wire - • Toyota RAV4 (2019-2024... .
RECOMMENDED TOOLS:
1. PRECISION KNIFE - Fiskars Heavy Duty Die Cast Craft Knife - amzn.to/3KGF5A9.
2. MULTIMETER - Fluke 179 Professional Multimeter with Backlight - amzn.to/3y0mAio.
3. SOCKET SET, RATCHET - GEARWRENCH 57 Pc. 3/8" Drive 6 Pt. Mechanics Tool Set, Standard & Deep, SAE/Metric - amzn.to/41wE6Z3.
4. DIAGONAL CUTTER - KNIPEX 74 22 200 Comfort Grip High Leverage Angled Diagonal Cutter, 8-Inch - amzn.to/40w0vVf.
5. PHILLIPS HEAD SCREWDRIVER - Klein Tools 603-4 Screwdriver - amzn.to/3kFGex0.
6. FLAT HEAD SCREWDRIVER - Klein Tools A216-4 1/8-Inch Flat Head Screwdriver - amzn.to/41v2L0h.
7. MINI LOW-PROFILE FUSE TAPS - Gebildet 12V-24V Low Profile Add-a-Circuit Fuse Tap, 6 pcs Fuse (3A 5A 7.5A 10A 15A 20A) and Fuse Puller (Pack of 4) - amzn.to/41ZvGde.
8. GROUND RING TERMINAL - Baomain Ring Ground Insulated Wire Connector Electrical Crimp Terminal 18-22AWG Red RV1.25-4 Pack of 100 - amzn.to/3Ltg77M.
9. WIRE STRIPPER - Klein Tools 1019 Klein Kurve Wire Stripper - amzn.to/3JEY5wz.
10. MALE / FEMALE ELECTRICAL CONNECTORS - TICONN 100 Pcs Nylon Spade Quick Disconnect Connectors Kit - amzn.to/3ZRMUYe.
11. THIN PROFILE LONG REACH PLIERS - Xcelite 378M Thin Profile Long Reach Electronic Plier, Serrated Jaw, 5-1/2" Length, 1-1/4" Jaw Length - amzn.to/3JvHXNQ.
12. SPLIT WIRE LOOM - Gardner Bender FLX-3810T Split Flexible Electrical Tubing, ⅜ inch x 10 ft - amzn.to/3kwmr3k.
13. ZIP TIES - 400 Pack Black Zip Ties Assorted Sizes 12+8+6+4 Inch - amzn.to/3xWjrjM.
14. CABLE HOLDERS - Flat Wire Clips Holder (100 pieces/Black) - amzn.to/3Ynwtl3.
Toyota RAV4 (2019-2024): How To Remove A-Pillar Trim. Will Dash Cam Wire Obstruct Airbag Deployment? - • Toyota RAV4 (2019-2024... .
Toyota RAV4 (2019-2024): DIY Playlist - • Toyota RAV4 (2019-2024... .
Dash Cam Reviews And Installation Playlist - • Dash Cam Reviews And I... .
Thank you for watching! Please support us by liking the video and subscribing to the channel!
You can also buy us a coffee! :) - www.paypal.com/cgi-bin/webscr....
Follow Us On Instagram - / morozovautomotive .
DISCLAIMER: All information displayed in the video is for entertainment and informational purposes only. You can't treat it as professional advice. Should you decide to act upon any information in this video, you do so at your own risk. When you click on links to various merchants on this site and make a purchase, this can result in this site earning a small commission. Affiliate programs and affiliations include, but are not limited to, the Amazon Associates Program.
#MorozovAutomotive #2019RAV4 #2020RAV4 #2021RAV4 #2022RAV4 #2023RAV4 #2024RAV4 Авто/Мото
RECOMMENDED TOOLS:
1. PRECISION KNIFE - Fiskars Heavy Duty Die Cast Craft Knife - amzn.to/3KGF5A9.
2. MULTIMETER - Fluke 179 Professional Multimeter with Backlight - amzn.to/3y0mAio.
3. SOCKET SET, RATCHET - GEARWRENCH 57 Pc. 3/8" Drive 6 Pt. Mechanics Tool Set, Standard & Deep, SAE/Metric - amzn.to/41wE6Z3.
4. DIAGONAL CUTTER - KNIPEX 74 22 200 Comfort Grip High Leverage Angled Diagonal Cutter, 8-Inch - amzn.to/40w0vVf.
5. PHILLIPS HEAD SCREWDRIVER - Klein Tools 603-4 Screwdriver - amzn.to/3kFGex0.
6. FLAT HEAD SCREWDRIVER - Klein Tools A216-4 1/8-Inch Flat Head Screwdriver - amzn.to/41v2L0h.
7. MINI LOW-PROFILE FUSE TAPS - Gebildet 12V-24V Low Profile Add-a-Circuit Fuse Tap, 6 pcs Fuse (3A 5A 7.5A 10A 15A 20A) and Fuse Puller (Pack of 4) - amzn.to/41ZvGde.
8. GROUND RING TERMINAL - Baomain Ring Ground Insulated Wire Connector Electrical Crimp Terminal 18-22AWG Red RV1.25-4 Pack of 100 - amzn.to/3Ltg77M.
9. WIRE STRIPPER - Klein Tools 1019 Klein Kurve Wire Stripper - amzn.to/3JEY5wz.
10. MALE / FEMALE ELECTRICAL CONNECTORS - TICONN 100 Pcs Nylon Spade Quick Disconnect Connectors Kit - amzn.to/3ZRMUYe.
11. THIN PROFILE LONG REACH PLIERS - Xcelite 378M Thin Profile Long Reach Electronic Plier, Serrated Jaw, 5-1/2" Length, 1-1/4" Jaw Length - amzn.to/3JvHXNQ.
12. SPLIT WIRE LOOM - Gardner Bender FLX-3810T Split Flexible Electrical Tubing, ⅜ inch x 10 ft - amzn.to/3kwmr3k.
13. ZIP TIES - 400 Pack Black Zip Ties Assorted Sizes 12+8+6+4 Inch - amzn.to/3xWjrjM.
14. CABLE HOLDERS - Flat Wire Clips Holder (100 pieces/Black) - amzn.to/3Ynwtl3.
Thank you so much once again (you already helped me with a Corolla Hybrid). For those of us who want to do things properly on these Toyotas, you truly are the go-to guy!
Best tutorial of all time.
Thanks for your vids. They are very helpful!
Love your videos. Thank you so much!!!!!
Thanks, this video is good for me to install my (dash+rear cam) to the fuse box , especially I use all these two empty fuse set , because the cam has the function of parking record. But I think, the ground should have a better position to connect. you should take off the button cover , then you will find the ground screw and esay to tight it .
EXCELLENT!!
Спасибо! Thank you very much!!!
Nice job and better recording
awesome work guys! well, i wouldn't do that to my own car by myself, but do you have a frond and rear sollution also for Rav4?
Good job! by chance have you figured out how to bring a coax wire from an external CB radio antenna inside a RAV4 cabin? Is there a route from cabin to under the hood or at least down trough the floor? Thank you any way, video was helpful.
Thanks for a helpful video. Great help on getting access to the Driver Side underneath. Comment only, it looks like the Fuse Tap should've been orientated the other direction since your Load Side was on the outside position.
Thank you for the feedback. You are right, the fuse tap should have been oriented the other way around. We did do it in the vehicle but forgot to show this in the video.
Thank you for the video, just want to know about the fuse's amperes you inserted. what are they? 5 amp, 10 or 20?
Can you please do an end to end wiring video for front and back cameras? For example 70mai pro
Thank you very much! I very much appreciate your attention to detail. Question: What is the nifty looking ball accessory under your hazard switch?
Thanks! The ball accessory is the base for the phone holder. ruclips.net/video/LTnAWP7Pevk/видео.html
@@MorozovAutomotive Ah, there is it. Thank you!
It looks like you put the fuse tap in backwards. The hot with ignition on was on the outside pin (where you put the load). It should be on the other pin for the fuse to protect it (just flip the fuse splice 180 degrees).
Thanks for the video! I ran my dashcam power cable over the headliner and down the driver's side, but used this same fuse box / fuse slot!
Yes, thanks for pointing it out. The fuse tap was installed backwards initially. We fixed it later but did not show it in the video.
Any benefit if you were splice into the 12 volt console mounted power outlet?
Rather than the acces. Box?
Both ways will work, but console socket is harder to reach.
Hi guys thank you for video. I have a couple questions. what kind of dashcam use? and what state do you live?
Hey, thanks for watching. The camera is FineVu CR-500HD.
Can anybody help me to locate the fuse for 12V power outlet/cigarette lighter please?
🤝👍
Thanks, great video but the fuse cover doesn't fit now?
Yes, you can't put it back on while using the fuse tap.
This video is really helpful, thank you. There is a question. How did you get the bolt which hooked up ground wire?
You just need to find one that fits.
Buy an adapter that clips to the back of the rear view camera. It'll power the dash cam easily. What I did with my toyota.
what do you do if you want constant power for parking surveillance?
You need the hardwiring cable. Toyota RAV4 (2019-2024): VIOFO T130 Review And Hardwiring. Parking Mode Works! - ruclips.net/video/CFJpegic5f0/видео.html.
How did you replace the cover of the fuse box after you attached the fuse connector?
We left the cover off.
Aren't most of these dash cams 12v with a step down to 5 volt in the socket adapter ?
I thought the same thing, but you see he cut into the wire and found it was 12v.
Others connected it to the OBD port instead of hardwiring. But i heard a disadvantage that it can also drain battery? What about your method? I had my vantrue N4 cam just arrived, i added obd cable. i will install this tomorrow. Hope all goes well or maybe my 2019 Rav4 goes ka-booom! 😢😢😢. If you can give advice which option please reply.
Personally I prefer hardwiring, but there is a good news for us as users - onboard computer of that generation of RAV4 will cut power at certain voltage drop to prevent deep discharge of the battery. It will not last forever - internal discharge will drain battery anyway, but if you are using car on the daily basis and generator is charging the battery regularly and normally you will see no problem from camera/ battery operation.
Morozov Automotive... precious!🤗. Thank you for the reply, the opinion and the information. I haven’t installed it yet, heavy rain yesterday and my mate used the garage. I’ll see this weekend, weekdays so busy. besides i need to see more how its done or the manual, i’m a bit hesitant but i have to do it haha... goodluck to my Rav here i come😅.
For your fuse tap, how did you figure out what fuse rating to use? I see you have a 30a and 15a installed.
7:25 - original fuse rating is 3 amps.
Morozov Automotive oh, I missed that. Thank you!!
One question: With the fuse taps in place, you can no longer install the fuse box cover correct?
Correct.
Maybe cigarette light DC may be a better option even though not as neat.
There is an easier ground. It is behind the plastic panel you are holding with your left hand here ruclips.net/video/zu9TsyYlGMQ/видео.html. There is a metal bolt (10MM) that works great as ground. You can then run your wire via the A pillar straight up to the windshield. I just hard wired my Uniden R3 today and it works like charm using this ground (and the washer fuse socket). Thanks for your help!
Does it work for parking mode? If the camera isn't on all the time?
ruclips.net/user/shortsHiPe7trbqq0?feature=share
attach it to your stereo aac power. they all use the fuse.
There is a switched 12v (and ground) available on the map light console. So instead of disassembling half of dash and the passenger A pillar, you could have just removed the map light and tapped the power up there. (I power my dash cam and radar off of this harness.)
Thanks for sharing .You are right - that is really a shortest and more tempting way to get 12 v for any additional equipment placed at the windshield, but most people just afraid to vex the warranty of the brand new car.We understand that and try to find more acceptable solution for regular car user. Tapping (splicing) to the electrical wire will put you to the certain risk of overloading that circuit and further possible conflict with service department of Toyota dealership. That is why we choose legal and harmless connection to the available and empty slot in the fuse box.
Don’t the map light and dome light have power when the car is off ?
@@facestar188 Both 12V "constant" and switched power are available up there. Although I have never used the constant. Some vehicles have a timer on the power to the map light to prevent lights from draining the battery.
@@BrianCzapiga It looks like there is only one set of wires to map light and it is the constant power. May be your car is not Rav4 2019?
@@facestar188 You must be confused. The MAP light is the same piece as the SOS button, and the sunroof controls. I have a 2020 RAV4 Hybrid. See this forum post: www.rav4world.com/threads/power-wire-for-valentine-1.300859/#post-2742505
Hi i have a rav4 2019 , i got a very expensive cam with 3g sim card that i can check from remote where is my car and watch so if i dont connect it directly to the power it will not work , its ok to connect it directly to the always power ?
All original power outlets(cigarette lighter or USB) will supply 12 vACC only in accessory mode(power -ON, Ignition -OFF). According to description ,your camera must have additional hardwiring cable for 12v constant or single hardwired cable for 12v constant. In this case you have no other option but wire it to 12v from fuse box or directly from battery. This generation of RAV4 will cut power before battery will be depleted completely, but anyway you have to consider power consumption of this camera if its operation going to be extensive- it may stop transmitting in parking mode abruptly, when on-board computer will cut battery power.
@@MorozovAutomotive yes mine is coneccted directly to the fuse, where you did but you say there is one with always power if i connect it there ill have power always even if the car is off ? thats my question ? Thank you :)
@@5820971 Yes, that is correct, the empty fuse slot, that close to the driver, supplies 12 v constant (even when car power is off).
Will parking mode work if the camera isn't always on?
No it wont work for parking with this setup. For parking mode coverage, one wire (I believe red wire) tapped to constant and other wire to Accessory power and on hardwire kit, set voltage cutoff to around 12.2 volts, maybe 12.4 volts in winter temperatures so you are able to start the vehicle or use 11:08 a dash cam external battery or two for power.
Were you able to put the fuse box cover back on?
No, wires are in the way.
Patiently waiting for a How to disable Auto Start&Stop.
What do you mean auto start and stop?
@@rayg3354 il’s the feature that stop the engine at a traffic light
Just keep it in sport mode :)
What kind of fuse tap did you use?
MINI LOW-PROFILE FUSE TAPS - Gebildet 12V-24V Low Profile Add-a-Circuit Fuse Tap, 6 pcs Fuse (3A 5A 7.5A 10A 15A 20A) and Fuse Puller (Pack of 4) - amzn.to/41ZvGde.
@@MorozovAutomotive Great Video. The Fuse tap is in the wrong direction? I was told the Load side should be plugged into the 12V Hot side. Confused and thanks.
@@PMartian Thank you! Yes, you are right. It is supposed to be the other way around. We did not install it the right way during filming.
@@MorozovAutomotive Thank you. I know the video is 3 years old but very informative and helpful still.
Ребята, а как на счёт подсветки бардачка. Что нибудь придумайте.
Тойота РАВ4 (2019-2020): Установка LED Освещения В Бардачок - ruclips.net/video/x8fn0-JWZVw/видео.html.
I
ruclips.net/user/shortsHiPe7trbqq0?feature=share
If I get two fuse sockets how much apmer I will put in ?
That is a serial connection, so the one that has lower current rating will break the circuit (example: pair of 7.5 and 30 amps- fuse can protect the circuit with up to 7.5 total amps only)
на русском давай ролик
why not connect the AC wire and the other 12v to your mirror? you create a lot of work for nothing. lol
For all Rav4 Prime 2021 HARDWIRE fuse setup, your OBD is your live constant power 12v and your ecu-acc is your acc. Okay, have great day!