The Probing Tip YOU Should Know Before Using A DMG Mori NLX-2500
HTML-код
- Опубликовано: 5 сен 2024
- CNC Machining is what we do. We are Experts and on this channel we are bringing our knowledge and experience to YOU. Want more? Learn CAD, CAM & CNC Machining through our FREE TITANS of CNC: Academy.
Subscribe for daily content and expert knowledge: bit.ly/SUBTITANS
___
___
FREE CNC Machining Academy. Join the Revolution:
academy.titanso...
Follow us on Instagram:
/ titans_of_cnc_academy
Like us on Facebook:
/ titansofcnc
Join the conversation on our Facebook Group:
/ titansofcncacademy
Connect with us on LinkedIn:
/ titansofcnc
Follow our CEO, Titan Gilroy:
/ titan-gilroy
___
___
THANK YOU to our Partners who make this content possible:
Kennametal - bit.ly/TIKennam...
Mastercam - bit.ly/Masterca...
Blaser Swisslube - bit.ly/TIBlaser
Mitee-Bite - bit.ly/TIMiteeBite
Royal Products - bit.ly/TIRoyalP...
Schunk - bit.ly/TiSCHUNK
JobBOSS - bit.ly/TiJB10
Tormach - bit.ly/TOCtor
Autodesk - bit.ly/TIAutodesk
#CNC #Machining #Machinist
MB017E7JAFBH4VC
You guys should mention , you can jog and touch off the tools with the door open. You'll need the Level 2 key for the control panel tho . Can you show how you guys indicate your y-axis to zero (on tools on center and on double stack capto blocks) . I have my way but I wanna see how you guys do it . Thanks!
Co axil indicator. Bring X down and get it reading as close as possible to, switch to Y mode bump it a click or 2, move X again, rinse and repeat till indicator reading is as close as possible. Boom
@@Flightmx22 that's one way
@@joey.cnc. I think the coaxial is your quickest bet. Just get close and dial it in with a few clicks. But I guess it also depends on how accurate you want the alignment.
I am in this position as well… learning on a Hass at school and working on Mori at work. Please give us more comparison videos.
That is a pretty quick and intuitive touch off procedure. NLX is a bad ass machine...
If you have a smartkey with level 2 , 3 or 4 hit the corresponding number on the right side of the control and you will be able to jog the tools with the door open. Much easier to see what is going on that way.
Panzax I hate that I have to press the safety button all the time
DMG Mori makes some insane cnc machines!
how do you touch off in the y axis? I know there must be a way, but i cant get the y axis to move with the tool probe down.
maybe you don't have a 3d probe , only x , z . Maybe that's an extra option .
Also, the machine won't start turning its main motor/ lathe when Y- axis isn't zeroed out.
within the nc code it's the line G28 V0 that insures the Y- axis is set to home. Always initiated before turning begins.
This can be turned off, however, deeeeeep down under the hood in the parameter settings.
Advantages can be, i. e. if you use stacked tools (like some Sandvik Capto tools), or if you have a gnarling tool - to set it can be a female dog, but if you have libereated the y- axis, it's just a matter of a few seconds.
Downside being, the parameter freeing the y- axis from liberating while turning is also the same one ensuring that you can only probe when Y is set to reference.
Which can really mess your values up if you have the usual DMG composite X/Y- Axis configuration.
Codes M611 (interlock off) and M610 (interlock on) control the y-axis interlock, these can be added in the cycles.
You can use the handle jog and make your measurement with the tool probe even with the door open ! :)
This is strange, the NLX1500 tool probe (lowering and raising) is completely controlled by the controller, you don't touch it.
Matthew Behrens I thought so as well... interesting haha
Used much lower end machines where the probe is operated by the machine, there's no way that its manual
But it is... I have nlx's in my shop and they can be manually operated. Even the NZX's are the same...
@@beatboxx713 Our NLX1500 has a small label on it (from the manufacturer) saying specifically not to. Maybe it is an option?. I will ask the guys at DMG the next time they come around.
@@matthewbehrens7091 probably, DMG-mori will make anything an option to make some money... Good ol corporate greed... 😆
sweet got a used mori seiki coming in might use this
Conversational program for cutting a keyway with live tooling end mill
Did you ever upload any more videos like this on the NLX?
More videos please
Can you please make a detailed video on Mori Seiki Duravertical 5100 control panel explained. it would be educational video for new machinists who have operated Hass and other machines but are not familiar with Mori. Thanks
How is the window holding up on this machine? I know on Haas they get chipblasted within in a week, and u dont see anything if having the door closed..
After a year and a half I don't see any changes in the glass clarity of NLX-2500
I think the screen have too much stuff on the same page.. I prefer when its focused on the task you try to accomplish :)
its cool but more complcated as on a lathe with siemens ^^
Do you run a lathe with Siemens?I'm asking because I have ran a Hyundai with Siemens control for 18 years .We are having board issues last one was 10k now we got another one out and they are thinking about replacing it with a Mori.I personal love the Siemens control we also have a haas and I run it also but hate it .I was wondering what new lathes have Siemens and is it way different because there conservational is amazing. THANKS
I got a about 60 min taper in nlx 2500/700 on the OD
I think something wrong with the turret
Do u have any idea how to fix that?
Tyson sir can u make video for milling operation.we are having dmg but doubt in making milling operation using celios app..waiting response
I run a vmc so not familiar with lathes and turning centres but I would have expected automatic probing cycles of sorts, where you enter rough dimensions and it does the rest for you.
Great video
can you help me how to change language for ntx1000 cnc machine (dmg mori)
i want to change from chinese language to english
thanks you guy
dope brother....true skills in figuring it out...#Master
Nice video
Doosan 280lm control? Thank's
Please do video for how to bore the jaws without closing the door option..
You can't sir, not on this machine... The machine spindle will not operate with the door open... Only way it can be done is by acquiring a level 4 key from manufacturer, which is mainly, and rarely, used by service guys...😳 You could however remove the door switch key from the top of the door and stick it in and out as needed, but this is very dangerous. You do get used to boring jaws with the door closed though and soon after you will be doing it with a program... 😆
@@beatboxx713 I agree with your comment. I have the same machine and I use a Boring Ring with a simple program. I do not recommend boring jaws with the door open .
You need to purchase a level 4 key and sign the 15 page liability release for an option called JB Interlock release
I would like to buy a machine What does doosan GT2600LM or DMG CLX 500 V3 suggest?
Nice
Is it a Mitsubishi controller?
Celos
@@MattBike usually nlx 2500 has Mitsubishi controller and screen looks similar since we have same machine.
Yes, ive checked it. Its Mitsubishi with celos on it.
@@MattBike "Envy" :-)
Mitsubishi m730um underneath the celos interface
how probe live tools
Same way
TITANS of CNC: Academy don't have to compensate for the tool radius?
because I have the same machine and I have some doubts
Parallel to spindle only gets probed on lenght , measure dia with calipers , or enter a rough for eg. 1/2 dia +0.01" for safety . Perpendicular to spindle gets probed on lenght&lenght , as in lenght from turret , and lenght from centerline - Tool dia is also taken into account , but some machines could handle this differently . I'm sure there are smarter ways to do this for the perpendicular tool , but usually we use no more than 2-4 driven tools ....
At the shop I worked at we had a 1/2" dia dowel pin in an er collet holder and used that to probe the center of our live tools (subtracting half diameter from touchoff). We also used a blake co-ax held in spindle jaws to find y zero
Hi, im not english native so not sure what you meant by live tools. Would you explain it to me a bit? Cheers
dad buy him the most expensive machine;)
😂 just wait till you figure out how to do it with rapid 😉
Daniel Machado - Brazil
Can’t believe you have to manually pull down the tool eye
Manual is standard, auto is an option. Not many people order the auto setter.
Does this shop do anything other than make propaganda for Mori and Makino?
Yeah, propaganda for haas and doosan
Probing tip.... Don't crash the probe.
Touch screens in machines and cars are the stupidest idea manufacturers could ever came up with.
That's annoying, having to probe with the door shut.
You can have the door open if you have smarkey 2,3 or 4.
Get ready for it. Door-shut CE style operation is coming to everywhere.
You can do it with the door open in level 2 while holding the acknowledgement button, but the MPG moves the machine at a limited speed
No comment.
though this is a comment
Jungs kauft euch ne MAZAK😉