MPP Solar 3048LV-MK 2048LV-MK 1012LV-MK Overview
HTML-код
- Опубликовано: 21 окт 2024
- 3048LV-MK , 2024LV-MK AND 1012LV-MK are not well known models , having zero transfer time when switching from AC input to Battery (other units typically do this in 10 to 20ms) which may glitch electronic devices and computer / Crypto Miners.
This unit as demonstrated can supplement Solar power with AC Power, example, you have a 1000W generator and a 1500W load, solar can be added to the generator power to run the load off solar and generator.
Supplied and supported by Watts247.com / usamppsolar.com, beware of imitations
Each of these models can be expanded up to 9 units in parallel / split phase/ 3 phase or single phase
(27kw for 3048, 18kw for 2024 - 24V model, and 9 kw for 12V 1012 model)
I just discovered this inverter last night and this is the first review video that I have watched. Great video and impressive features. Thank you!
Just bought this 30/48 unit from watts247 thanks to your video and customer service! Sweet!
Thanks so much Ian and for telephone call back. This really helps with my planning.
Awesome review. Thanks! I may have to add this one to my collection.
Just ordered mine. Going to run for a 12 V hundred amp lithium batteries with it for the time being until I pick up a single one. What would you recommend for solar panels. I was leaning towards the 40 V 300 W panels but would love some suggestions on what you believe would work best.
It appears 2 of these will power quite a bit when setup for 240 volt with the kits added. Only 240 load we have is 3/4 hp deep well pump. The brochure says double the output for 5 seconds. Seems very boastful. Wondering if 2 units will start our deep well pump?
inverter expert king or pip 5048 mkx ll has issue with Mppt when battery fully charged and low home load and high pv power available I see Mppt is up and down fast and this makes fluctuations in output waveform of inverter and i see fluctuations in bulbs in my home also this issue still there when Mppt working with utility (double conversion) … I think updating algorithm in Mppt and tracking the load not just battery can solve this issue … do you have the same issue?
It’s working fine with inductive load normally or not?
Do the fans on these units runs constantly without load and could you do a load test ?
Sounds like it would work really good for a total off grid system with a generator and solar panels.
Will it run inductive loads like motors ?
Got many customers using these models running Camper Aircons , and others on well pumps. Surge rating of 2 x rated for 5 sec (3kw has 6kw surge rating for 5 sec)
@@watts247 Sounds like that will work for my girlfriend home .
She has been living totaly off grid for 30 years as there never has been power lines on her road . Has only had 400 watts of HF solar panels for 3 years that me and her built and set up.
It is time to build a bigger solar system and bigger inverter and go to LiFe batteries.
Need to run well pump, washer , gas dryer , have to run the generator to do that now and gas cost a lot more now .
We would like to setup a wood working shop and run some of the smaller machines on solar like a cnc router carver and shop vacuum at same time as a business .
Does this model have split phase center tap ?
Will it give 120V / 240V output ?
What is the cost of the controller/ inverter and sizes ?
Can it be linked to other inverters for more output later ?
Or maybe even set up 3 phase output some time in the future , to run 3 phase motors ?
,That would reduce the lock rotor surge of single phase motors due to the phase shift , that inverters and generaters don't like .
Cómo configurar dos equipos de 6k de 48v , uno Master y el otro esclavo
Cool feature!
Can't solark also specify source priority?
Great video! Are you using 1012LV-MK on this video? I have 1012LV-MK that has very unstable AC output (LED lights flickering and the AC voltage display will show the Voltage jumping around between 115 ~ 122VAC) from from the inverter when using loads, it becomes more stable if I have >500W loads. Your looks very stable compared to mine. I wish i bought the unit from you instead of directly from MPPT Taiwan because they did not help to solve the issue at all. I take the video showing what is going on, may be they have update FW or something to fix the issue. I can give you the link to my RUclips video.
Right now I have been running the unit as the Solar charger only and using the external inverter to run my loads.
Interesting, sometimes a fan, refrigerator or some other inductive load can cause this sometimes. try installing a 10uf 200VAC capacitor directly across L and N on the output
I think my lv2424 does this too?
Similar , but not exactly
cool sir