Beautiful truck!! Thanks for shedding some light on the radius arm issue. You guys did my power wagon a year ago and when you featured it on insta people were talking about how I shouldn’t have gotten the arms. I love them!! Are the coil spring retainer brackets something that can or should be added to my Pin Top system??
Yeah we prefer the benefits of the arms and think it's a noticeable improvement on these trucks! As for the retainers, if you run your truck hard, it might be a worthwhile addition. It's really only for extreme use cases though.
PWDNTCR = Power Wagon Don’t Care! Haha took me a second. I’m in AZ w my white ‘21 PW. Hope I catch this “orangasm” of a truck driving around! That topper 🤤
What kit is recommended for a 4th gen single cab hemi. Wanting some decent wheel articulation but still able to daily? I've been running thuren level kit for a while and no sway bar
Beautiful build! I like the way it all comes together. Time to update my 2006 for a 2024. I also considered the Rebel Cummins, but it's only a partial PW. Have you researched the Rebel, or does that just fall under the 2500 HD unbrella?
Hey Cody. You mentioned that the typical CJC Exclusive wheels will not work well for this kit. I originally wanted to get the CJC exclusive Methods with the beadgrip, but it would be great to share some other options. I was looking at Raceline and KMC just to be different from everyone else who has Methods.
This particular system is a unique case because of the rear shocks. Really any 0 offset wheel work so it just comes down to your personal preference on brand and looks! For everything else that isn't a 2014+ Dominator equipped Ram 2500, we still recommend +12 to +27 offset.
I'm about to sell my 2010 Tacoma TRD off-road minimax!! I do need a bigger truck! I really want a Power Wagon!! How much does this whole set up cost Cody?
Here's a link to compare the different systems we offer for Power Wagons: www.cjcoffroad.com/collections/2019-ram-2500-powerwagon-carli-suspension-systems
@CJCOFFROAD Do you guys do the shop work on this for customers too? I don't feel comfortable with my local shops. I'd make the drive to ya to get it done right.
Beautiful truck! So a dominator kit wouldn’t work with 37/13.5 and +18 offset (18x9) wheels? Also did ya’ll have to trim metal on the front for the 0 offset wheels or just plastic?
Sadly not on a 2500 because of the rear shocks. With 37/13.5s on a 0 offset wheel, this took some decent pinch weld trimming on top of the normal plastic fender liner trim.
@@CJCOffRoad I get why the want and need for the 37s. But really curious if anybody yet has just done 35s with a kit like this. Or will I be the first to do that when my PW finally comes in? As it will also be a daily driver for the most besides weekend fun with the family. And then where to find a local shop I could trust to do such welds for the kit? Cause I'm still new at welding so not something I want to practice on just yet with my skill level and welding equipment capabilities.
On the Power Wagon platform it does. We offer two different rear coil options too. This truck has the HD coils for even more capacity, and they are designed for around 800 pounds of static load.
Alpine Diesel in Edmonton does quality work and does a fair bit of Carli suspensions. if you're in Calgary I'd probably say the Gear Shop, granted they really like their Toyotas. Don't bother with Krave automotive, they're Toyota fan boys who don't like domestics.
Here's a link to the different Power Wagon options so you can see pricing: www.cjcoffroad.com/collections/2019-ram-2500-powerwagon-carli-suspension-systems
What's on this truck:
Carli Power Wagon Dominator System: www.cjcoffroad.com/collections/2019-ram-2500-powerwagon-carli-suspension-systems/products/carli-suspension-2014-2020-dodge-ram-2500-dominator-king-3-0-3-lift-system
Options:
Carli dual opposing stabilizer system
Carli radius arms
Carli R2 high capacity rear coils
Method NV wheels (0 Offset): www.cjcoffroad.com/collections/nv/products/method-race-wheels-nv-matte-black
You guys NEED a bigger media team! I’m dying to see new videos daily. I’m sure others are too!
We need more people on the team period! Poor Cody and Cole have their hands too full to make videos.
You could always watch Christmas Story to catch up on what Ralphie is up to.....
@@CJCOffRoadwhat suspension do you recommend for a Cummins 2500 rebel?
Gives it a crazy tank look😮
my dream off road truck
bro dumped money into this Truck. top top top
Kit looks killer! I just need to buy a new Ram!
Sick build. Love it? What truck cap is that and do you sell it?
Beauty build. All it needs is your intercooler protector and get rid of the stock plastic valance. Love the cap
We agree!
Beautiful truck!! Thanks for shedding some light on the radius arm issue. You guys did my power wagon a year ago and when you featured it on insta people were talking about how I shouldn’t have gotten the arms. I love them!! Are the coil spring retainer brackets something that can or should be added to my Pin Top system??
Yeah we prefer the benefits of the arms and think it's a noticeable improvement on these trucks! As for the retainers, if you run your truck hard, it might be a worthwhile addition. It's really only for extreme use cases though.
@@CJCOffRoad thanks for the reply and keep up the good work!!!
PWDNTCR = Power Wagon Don’t Care! Haha took me a second. I’m in AZ w my white ‘21 PW. Hope I catch this “orangasm” of a truck driving around! That topper 🤤
Tell me about that topper ? What is it?
What kit is recommended for a 4th gen single cab hemi. Wanting some decent wheel articulation but still able to daily? I've been running thuren level kit for a while and no sway bar
CJC Off Road - How does this system compare to the AEV 2019+ RAM HD 3″ DUALSPORT SUSPENSION - RT? Thanks
Beautiful build! I like the way it all comes together. Time to update my 2006 for a 2024. I also considered the Rebel Cummins, but it's only a partial PW. Have you researched the Rebel, or does that just fall under the 2500 HD unbrella?
The Rebel is basically just a trim package for the 2500, similar to the Tremor for the Super Duty platform.
1 inch lower would be perfect!
Like to see a steering shock review between Fox, Carli and etc
They all have a unique purpose though!
Could you increase Towing capacity with this Kit?
Do you guys recommend the lower shock mount for the pintop 2.5 kit?
We do if you plan to use the truck off road. The stock mounts don't hold up well with big shocks!
Hey Cody. You mentioned that the typical CJC Exclusive wheels will not work well for this kit. I originally wanted to get the CJC exclusive Methods with the beadgrip, but it would be great to share some other options. I was looking at Raceline and KMC just to be different from everyone else who has Methods.
They prefer a 0 offset and 4.75" backspacing wheel for this kit on 37x12.5s or 13.5s for least amount of trimming.
This particular system is a unique case because of the rear shocks. Really any 0 offset wheel work so it just comes down to your personal preference on brand and looks! For everything else that isn't a 2014+ Dominator equipped Ram 2500, we still recommend +12 to +27 offset.
…on an 8.5-9” wide rim?
I'm about to sell my 2010 Tacoma TRD off-road minimax!! I do need a bigger truck! I really want a Power Wagon!! How much does this whole set up cost Cody?
Here's a link to compare the different systems we offer for Power Wagons: www.cjcoffroad.com/collections/2019-ram-2500-powerwagon-carli-suspension-systems
Ohhhh, Yeah! Jump the truck!
Can y’all show some 11-16 f250 love?
I volunteer my truck as tribute 😂
Bring it in for a build with us!
@CJCOFFROAD Do you guys do the shop work on this for customers too? I don't feel comfortable with my local shops. I'd make the drive to ya to get it done right.
We did this install, and we also have a whole network of partner installers.
coool !
What year is your blue company PW?
Beautiful truck! So a dominator kit wouldn’t work with 37/13.5 and +18 offset (18x9) wheels? Also did ya’ll have to trim metal on the front for the 0 offset wheels or just plastic?
Sadly not on a 2500 because of the rear shocks. With 37/13.5s on a 0 offset wheel, this took some decent pinch weld trimming on top of the normal plastic fender liner trim.
@@CJCOffRoad
I get why the want and need for the 37s. But really curious if anybody yet has just done 35s with a kit like this. Or will I be the first to do that when my PW finally comes in? As it will also be a daily driver for the most besides weekend fun with the family. And then where to find a local shop I could trust to do such welds for the kit? Cause I'm still new at welding so not something I want to practice on just yet with my skill level and welding equipment capabilities.
Good morning Gents,
Do you need to upgrade the stock brakes to accommodate for the larger tires?
Thank you.
Respectfully,
Robert
We're still keeping the stock brakes. Unlike Tacomas etc, these trucks were made to tow, so the stock brakes have no issues stopping larger tires!
@@CJCOffRoad thank you
What topper is that on the red truck?
RLD design. Check out rsi smart caps also
Would you still be able to put airbags on the truck with this kit or the pintop kit?
You can, but that would lose you about 2" or wheel travel and be a noticeable reduction in ride. That applies to a stock Ram 2500 or Power Wagon too.
What is the price breakdown on this set up.. and what's the lead time on a build.??
Here's a link to Power Wagon system pricing: www.cjcoffroad.com/collections/2019-ram-2500-powerwagon-carli-suspension-systems
Will a Backcountry system fit?
Absolutely!
By today’s numbers, how much would an all-in number go for a Power Wagon like this, minus the rear cab?
You could build this for about $80,000 brand new with most of the top options, with NO camper shell.
does Carli suspension increase payload and towing capacity?
On the Power Wagon platform it does. We offer two different rear coil options too. This truck has the HD coils for even more capacity, and they are designed for around 800 pounds of static load.
Any reputable installers in Alberta? Would like a back country or pin top system on my 2019 PW
Shoot us an email and we can recommend the best fit for your project. Sales@cjcoffroad.com
Alpine Diesel in Edmonton does quality work and does a fair bit of Carli suspensions. if you're in Calgary I'd probably say the Gear Shop, granted they really like their Toyotas. Don't bother with Krave automotive, they're Toyota fan boys who don't like domestics.
🤤
How much does this system cost?
Here's a link to the different Power Wagon options so you can see pricing: www.cjcoffroad.com/collections/2019-ram-2500-powerwagon-carli-suspension-systems
1st