Just had my maiden flight. Very easy to fly in both Q-Stabilize and FBWA modes. Transitions are very smooth both ways. I'm planning to change the cruise mode to acro. If you add FPV, there are few options other than up front which screws up the CG so you'll require some counterweights at the tail. Quality is very good, just don't bother to install the nacelle covers. I'm planning to install my Caddx Vista on top of the canopy to get around the CG problem. The biggest problem right now is that there are ZERO spare parts available anywhere. I'd like to have a spare canopy so I can modify it for the Caddx Vista. Its an amazing plane at a great price but we need parts.
have fun buddy. I would rather 3D design and print the parts like i can design and print canopy that will have exact fittings and place for the systems i wanna use. unfortunately mine one day flew in thick trees, and after searching for hours and hours i could not find it. so mine is gone. i can't do anymore design work or 3d parts for it. i was planning to do many custom 3d printed parts for it.
I really look forward to watching this video. The aircraft appears to be very unique, and reminds me a little bit about the "Airwolf" helicopter from the TV series, and also a bit about the "Batman" TV series as well which featured a "Batcopter" aircraft. The characters in Batman TV show would sometimes also utilize a folding "grappling hook style" item that resembles "the plane" very closely. In any case I am very curious now about this "plane", and how much of a range that it has. Thank You for your continued efforts in bringing unique and interesting content to our screens, and Best Wishes to you and your family... :) _John_
Hi Ali: Great video ii have my PNP with FC and GPS coiming in a few weeks, were did you get those lipo batteries you are using in this video, do you have a link you can share, all the lipo batteries i can find anything over 2200 MAH is too big for the battery compartment on the FIMI manta.
I love VTOLs. Have many of them. This is what the Eflite Convergence should have been. I'd like to buy this one (PNP with FC) but several questions come to mind. 1. Radiomaster is not that prevalent in Canada. I use Spektrum. What RX do I need to work this thing? Serial? Standard RX? 2. Will this thing work out of the box without FC programming as a VTOL only. I have no desire to do FPV or programmed flights or even long, endurance flights. 3. LiIon batteries are not that usual here for RC planes. Can this be flown with LiPos? 4. Is there a set of instructions included with this or is it one of those, "If you don't know how to set this up, you shouldn't be owning one" kind of models? You've been a great help to me for my FlyWing 450 adventure. Yes, I'll buy you a couple of coffees very soon. - "Ok Vad" on Facebook 😎
I am not sure what rx to use for spektrum. i have no idea for that. there is a way set sbus rx for this pnp ardupilot sbus but seems need some settings to change. i am using crossfire so it works like a charm. like real plug and play it works as vtol right out of box once you do right setup. there is a guide for how to program radio and which switches yes it can fly with lipo. make sure to set CG right or you will crash it because its a wing and in forward flight cg is most critical for wings i have no idea what is included in terms of user manuals. but fimi normally does a good job with manuals. still if you need any help you can email me. i can share my radio settings, ardu settings, and any questions you will have, i will try to help you out. thank you for your support. this is such a sweet vtol. i will be bringing it out again once i finish welding my electric paramotor trike. this is taking much time now. I am welding the new power combo frame today. puts out 62kg of thrust. and then will weld a small trike. I will design and 3d Print the wheels and many parts i plan to 3d print :) I may post that project in diy videos. then when I get time, i will bring this VTOL out for more flights and FPV
Your wiring diagram is wrong. The UART TX is BLUE and goes to the edge of the receiver, the UART RX is WHITE. There is no yellow wire. Your actual wiring on your plane is correct, but your diagram is wrong.
Lucky us, that Diagram was supplied by FIMI and I followed it. well guess what one day it just flew away in thick trees and i searched for hours and hours and hours. could not find it
You talk about limited banking angle, is there any way to go to the acro mode, or is it locken in attitude? Do you have experience with other VTOL UAVs to compare Manta to? Thanks for informative video, cheers!
Hi Ali got another question, i have a radiomaster tx16s do i need a receiver to plug into the FC, i asked FIMI but they said all i need is a battery and the radio, i would assume u need a receiver to bind to the radio but naybe i am wrong. If i need one which ones are good to get.
you need sbus receiver to plug in, which is pretty complicated because you need to fiddle with ardupilot settings. most plug and play setup i found is to plug in a TBS Crossfire Nano sbus Rx, and then use TBS crossfire lite on my TX16s or boxer Edgetx. thats the easiest.
I just realized ali i have a new dragonlink module and receiver that works with ardupilot will this work. I bought it for my hex a copter but gonna use it on the manta
I have a question I’m trying to get into the hobby of drone photographer and wanted to ask if you know any good drones with good connection and and if the drone can carry the weight of modified parts please inform me if you know
Boas amigo,como posso adquirir um destes 500! Ja pedi 2vezes no alli express e veio sempre enganado! mandar sempre im modelo diferente e inferior!!? Obrigado amigo abraço
Got mine today, PNP version. Planning to install it with the new Speedybee F405 Wing and add a DJI O3 Unit. Any idea if the Speedybee wing will do the job too? Looking forward for the other Fimi manta video's!
if its designed for VTOLs, it should do the job of course. I am actually looking at SNL Fast FC. its super easy to setup using OSD only, supports QGCS and MP, and Y3 VTOL as well. Ardupilot is just way too complicated to understand LOL for an old man like me
@@alishanmao FWIW I have the SN Fast and its been an exceptional FC so far, a bunch of flight mode options and great customization. Mine is in a standard wing though so I cant comment to its VTOL abilities
12000mah battery tattu 15c rating Cell voltage on 6 cell 3.7 V Total voltage 22.2can we drop more than this is it safe or not battery will not have any problem please reply sir from india
Way past my knowledge level, I need to find a friend that is Way More knowledgeable with all this new technology. Me not being able to solder good enough to be reliable, kinda counts me out.
Hey, it's the closest we have until they let us have the anti gravity tech. Nice flying, and it's great to see my idea working.
Cool, thanks
Well done, Mansoor! If they ever build an RTF version, I'll be all over it!
Actually its coming soon. Get your cards ready brother :)
Great VTOL. Looking forward to see the FPV video.
You and me both!
Just had my maiden flight. Very easy to fly in both Q-Stabilize and FBWA modes. Transitions are very smooth both ways. I'm planning to change the cruise mode to acro. If you add FPV, there are few options other than up front which screws up the CG so you'll require some counterweights at the tail. Quality is very good, just don't bother to install the nacelle covers. I'm planning to install my Caddx Vista on top of the canopy to get around the CG problem. The biggest problem right now is that there are ZERO spare parts available anywhere. I'd like to have a spare canopy so I can modify it for the Caddx Vista. Its an amazing plane at a great price but we need parts.
have fun buddy. I would rather 3D design and print the parts like i can design and print canopy that will have exact fittings and place for the systems i wanna use. unfortunately mine one day flew in thick trees, and after searching for hours and hours i could not find it. so mine is gone. i can't do anymore design work or 3d parts for it. i was planning to do many custom 3d printed parts for it.
Amazing.
Thank you! Cheers!
Really nice video! I have a question, did you get Analog OSD working on yours? Some how mine dont show up 😢
Unfortunately no
Waalaikumsalam...i am from Indonesia...
Welcome :)
Very cool VTOL! I hope my Manta (version without FC, ESCs) arrives soon. Great video! Cheers mate
Cool 👍 have fun building it :)
@@alishanmao Thanks!
Hi. Thanks for your video.
Is the programming software running on MacOS or only Windows based?
Check on ardupilot website, they should have all info
Nice. Any plans on changing gps to a one with compass. So position hold works in hover. Would be nice to see a how to on that subject.
so far no plans :) because the vertical take off is only for taking off and landing and then we switch and fly mostly in Forward flight mode
I really look forward to watching this video. The aircraft appears to be very unique, and reminds me a little bit about the "Airwolf" helicopter from the TV series, and also a bit about the "Batman" TV series as well which featured a "Batcopter" aircraft.
The characters in Batman TV show would sometimes also utilize a folding "grappling hook style" item that resembles "the plane" very closely. In any case I am very curious now about this "plane", and how much of a range that it has.
Thank You for your continued efforts in bringing unique and interesting content to our screens, and Best Wishes to you and your family... :) _John_
you are always welcome buddy :)
Looks like something" BAT MAN! " would fly !!!
Mansoor is Batman.
@rickbaue I think I'm going to get this one for my homemade fpv cockpit, been using the t1 Ranger vtol , check it out on my channel
Need a suit LOL :D
Hi Ali: Great video ii have my PNP with FC and GPS coiming in a few weeks, were did you get those lipo batteries you are using in this video, do you have a link you can share, all the lipo batteries i can find anything over 2200 MAH is too big for the battery compartment on the FIMI manta.
sent for testing from factory :) they are not available for sale now. maybe they will bundle with RTF versions?
Nice video
Thanks
is it better? which one? this one or the heewing vtol?
i have not flown heewing vtol so honestly i am not qualified to compare these two. if i had that, then i could give you an honest suggestion
Pls do a boxer setup tutorial on this fimi manta. Tqvm.
I switched to TX16S Mark 2 Max Edition. i will do a video and it should be same for boxer, minus the graphics
I love VTOLs. Have many of them. This is what the Eflite Convergence should have been. I'd like to buy this one (PNP with FC) but several questions come to mind.
1. Radiomaster is not that prevalent in Canada. I use Spektrum. What RX do I need to work this thing? Serial? Standard RX?
2. Will this thing work out of the box without FC programming as a VTOL only. I have no desire to do FPV or programmed flights or even long, endurance flights.
3. LiIon batteries are not that usual here for RC planes. Can this be flown with LiPos?
4. Is there a set of instructions included with this or is it one of those, "If you don't know how to set this up, you shouldn't be owning one" kind of models?
You've been a great help to me for my FlyWing 450 adventure. Yes, I'll buy you a couple of coffees very soon. - "Ok Vad" on Facebook 😎
I am not sure what rx to use for spektrum. i have no idea for that. there is a way set sbus rx for this pnp ardupilot sbus but seems need some settings to change. i am using crossfire so it works like a charm. like real plug and play
it works as vtol right out of box once you do right setup. there is a guide for how to program radio and which switches
yes it can fly with lipo. make sure to set CG right or you will crash it because its a wing and in forward flight cg is most critical for wings
i have no idea what is included in terms of user manuals. but fimi normally does a good job with manuals. still if you need any help you can email me. i can share my radio settings, ardu settings, and any questions you will have, i will try to help you out.
thank you for your support. this is such a sweet vtol. i will be bringing it out again once i finish welding my electric paramotor trike. this is taking much time now. I am welding the new power combo frame today. puts out 62kg of thrust. and then will weld a small trike. I will design and 3d Print the wheels and many parts i plan to 3d print :) I may post that project in diy videos. then when I get time, i will bring this VTOL out for more flights and FPV
Your wiring diagram is wrong. The UART TX is BLUE and goes to the edge of the receiver, the UART RX is WHITE. There is no yellow wire. Your actual wiring on your plane is correct, but your diagram is wrong.
Lucky us, that Diagram was supplied by FIMI and I followed it. well guess what one day it just flew away in thick trees and i searched for hours and hours and hours. could not find it
Is there a "return home" function which can be manually activated or on lost signal?
yes
Wow very nice sir..thanks for sharing
So nice of you
Good job my friend
Thanks for the visit
Sir can you make a video on a battery how much maximum discharge can be done in a safe way
9.6v is the last on li Ion. can't go below that
You talk about limited banking angle, is there any way to go to the acro mode, or is it locken in attitude? Do you have experience with other VTOL UAVs to compare Manta to? Thanks for informative video, cheers!
you can program ardupilot the way you want buddy :) so far no other vtols to compare to in this size. if i get one, for sure will compare
great video
Thanks for the visit
Thanks a lot for the vídeo! Will you install an analog Fpv system in it ?
soon, after i get rid of the current issue of this not switching to forward flight mode. something to do with some kind of glitch in flight controller
Please share FPV view of this air-frame. I wanna see how stable it is from FPV view. Thanks.
Will do
Assalamualaikum brother
can this drone be use with tbs tango remote? combo with o3 camera maybe?
wassalam. any setup can be done of course if you want to do it. TBS Tango has crossfire right?
@@alishanmao yes it is.. i use crossfire in my fpv drone, if it can be work,i must not buy other remote 😁
@@YosepAliSaputra no worries. crossfire is plug and play with PNP Manta. go for it. bit.ly/mantafimi
Este manta parece melhor que os outros antecedentes (450! E 500!?)
yes
MANTA🎉
yeah
Great Flyer and Resonable $
Hi Ali got another question, i have a radiomaster tx16s do i need a receiver to plug into the FC, i asked FIMI but they said all i need is a battery and the radio, i would assume u need a receiver to bind to the radio but naybe i am wrong. If i need one which ones are good to get.
you need sbus receiver to plug in, which is pretty complicated because you need to fiddle with ardupilot settings. most plug and play setup i found is to plug in a TBS Crossfire Nano sbus Rx, and then use TBS crossfire lite on my TX16s or boxer Edgetx. thats the easiest.
I just realized ali i have a new dragonlink module and receiver that works with ardupilot will this work. I bought it for my hex a copter but gonna use it on the manta
@@andysdroneempire1942 if you have something that works with Ardupilot, of course then you can always get manta
EXCELENTE
Thank you :)
I have a question I’m trying to get into the hobby of drone photographer and wanted to ask if you know any good drones with good connection and and if the drone can carry the weight of modified parts please inform me if you know
i have sold out all my drones. else you could have bought mine cheaper.
What is the maximum flying speed? Just find info for crusing and stall speeds...
yet to test buddy
Boas amigo,como posso adquirir um destes 500!
Ja pedi 2vezes no alli express e veio sempre enganado! mandar sempre im modelo diferente e inferior!!? Obrigado amigo abraço
yes ordering from aliexpress is very tricky
sir how far can we drop six cell battery 22.2 Sir voltage is more than this how far can we drop it safely voltage please reply
depends on battery chemistry and age
Got mine today, PNP version. Planning to install it with the new Speedybee F405 Wing and add a DJI O3 Unit. Any idea if the Speedybee wing will do the job too? Looking forward for the other Fimi manta video's!
if its designed for VTOLs, it should do the job of course. I am actually looking at SNL Fast FC. its super easy to setup using OSD only, supports QGCS and MP, and Y3 VTOL as well. Ardupilot is just way too complicated to understand LOL for an old man like me
The Speedybee wing can run Ardu Plane so you should be good for VTOL.
@@alishanmao FWIW I have the SN Fast and its been an exceptional FC so far, a bunch of flight mode options and great customization. Mine is in a standard wing though so I cant comment to its VTOL abilities
@@ST19859 yup i am also thinking to get one SN Fast to install in FIMI Manta :)
There are only two locations for the engines, you need at least three for the manta, right?
12000mah battery tattu 15c rating Cell voltage on 6 cell 3.7 V Total voltage 22.2can we drop more than this is it safe or not battery will not have any problem please reply sir from india
3.6 is the last
Where di you get the battery packs?
FIMI Sent those for my testing :) they do give very good flight times
what ESC are installed in this version?
not too sure. not much info on those.
Where can I find the RTF version.
I believe its coming out soon. stay tuned
How do you get you're radio to say what you wanted to say how to
you can set sounds and tracks to switches. there is a video tutorial i did about it
Kann ich meine eigene Stimme verwenden?🤔
Can you send it to me that could do the same to my son's radio
Way past my knowledge level, I need to find a friend that is Way More knowledgeable with all this new technology. Me not being able to solder good enough to be reliable, kinda counts me out.
there will be an RTF version coming out soon
Hello does the drone comes with camera installed ?
not PNP version. RTF maybe with camera