Это видео недоступно.
Сожалеем об этом.
Miles M.57 Aerovan RC maiden flight
HTML-код
- Опубликовано: 23 сен 2015
- Erstflug meiner Miles M.57 Aerovan. Gebaut nach einem Bauplan von Tony Nijhuis in 1:10. Spannweite 1520mm, Länge 1068mm, Antrieb 2x Dymond 3536 1250KV, Lipo 3S 5000mAh.
Es ist nicht genug, die Querruder zu checken. Es ist auch zu checken, ob sie richtig herum laufen!
Maiden fligth of my Miles M.57 Aerovan. Build by plan by Tony Nijhuis. scale 1:10, wing span 1520mm/59", length 1068mm/42", motor 2x Dymond 3536 1250KV, Lipo 3S 5000mAh.
Do not check the aileron only. Check also the right direction!
I like those “non sleek “ boxey planes…..nobody ever builds them….glad to see you did , thank you (even though it crashed ) .
Nice build and sorry to see the crash. I built and flew this rarely modeled subject on my WTFLYR channel a few years ago. I was afraid to fly mine, and finally flew it with a good hand toss, which flew surprisingly well. I think I would be afraid to ROG, without a good run on pavement.
+Bill G A hand toss, maybe it is a little bit to fat. You will Need two hands. Next I will add a little bit flaps for start. That can be helpfully.
Frank73 I know it's a bit large for a hand toss for sure! Mine is 36" span, 19oz AUW, making it a bit easier. I believe I was a bit nose heavy also. I tried the flaps in flight, which required a bit more up elevator. I used near scale sections changing from a NACA 23012 to a 2412 at the tips. It seems to have worked well, with no tip stall issues. I did watch my video again however, and noticed that also it did have a pronounced left hand dip after launch, which was not a trim issue either.
Make the motors go inwards to cancel out torque.
That was a definate torque roll on take off it needs some right thrust,or fit contra props.
Hallo Frank, mein Beileid zum Absturz. Hast du es wieder in Gang gesetzt? Ich habe das Modell auch gebaut und hatte große Schwierigkeiten, es in die Luft zu bekommen. Im Moment baue ich deshalb ein paar Dinge um (anderes Bugfahrwerk und Kreisel drauf, größere Räder, gegenläufige Propeller).
Grüße, Jörg
+Joerg Hesse Ist noch in Arbeit (liegt im Keller, Ersatzteile habe ich schon). Landeklappen sind auch zum Starten gut, 10-20° in der Startphase könnten was bringen.
is there a kit for this if so where do you buy from
It is a plan/laser cut wood pack/kit bought in UK www.sarikhobbies.com/product/miles-m-57-aerovan/