42g 1S Baby Toothpick Build & Setup. Seriously Good!! TBS, FPV Cycle, Zeez, Caddx
HTML-код
- Опубликовано: 25 авг 2024
- The FPV Cycle Bay Toothpick by KababFPV, Shockingly agile and powerful 1S weighing in at 42g only, watch my complete build and setup. Please subscribe and like.
Time Stamps:
00:20 Build components
01:20 Motor Installation
02:00 Screws, Spacers, Dampeners
05:00 Flight Controller details
13:00 XT30 cable
13:25 Caddx Ant Camera install
17:15 Multimeter Check
29:47 Betaflight Settings & PIDS
35:05 Maiden Flight
Full Spec:
Baby Tooth frame in 2mm thickness
FPV Cycle 1202.5 11,500kv motors
Gemfan 3018 props
FPVCycle 1S AIO - with TBS Crossfire and Pro32 Nano Vtx
Caddx Ant FPV Camera
Bee Brain V2 camera mount
600mah 1S battery - XT30 Conversion
Links:
KababFPV’s flight footage:
• Baby Tooth 1S 3" Fligh...
FPV Cycle Build Page:
fpvcycle.com/b...
More Advanced Betaflight Tuning:
• Betaflight 4.2 for 1S ...
More on Betaflight:
oscarliang.com...
How to change motor direction:
oscarliang.com...
Changing battery connectors:
• Replacing Battery Conn...
Music By:
www.bensound.c...
#babytoothpick #babytooth #babytoothpickbuild 
Наука
Thank you!
Not sure why angle/horizon modes are needed😎. Happy Flying😎
Lol yea, thanks for watching happy flying to you too.
Good work! Keep up!
Thank you Hennry
brilliant video! just dropped a sub :)
Thank you and appreciate the sub 🙏🏼
Great build but if I may, you powered up with no antenna on the rx or vtx couldn't cause problems even thought it's only 1s?
Thanks Mark and you are indeed correct that in most cases you should have the antenna's on before powering up but TBS has designed the Unify Pro and the Crossfire Nano (and most of the newer products) in a way that leaving them on with no antenna for a certain amount of time will have no damaging effect. The different products have their own time limits anything from a few minutes to a few hours and some indefinitely. Not all though so if anyone is unsure they should put them on just in case anyway.
Hi, Which fc aio 1s do you recommend? The fpv aio 1s is sold out for a Long time. Thank you. Great video by the way
Thanks, appreciate it, many seem to be a bit unreliable, I have seen many people use the BetaFPV aio, there is a new version of it with the built in VTX, but I can't comment on reliability, the FPV Cycle aio shows as getting new stock after Chinese new year which I should be ending any day now, oh also check out the iFlight SucceX F4 whoop aio, which also has a built in VTX.
Yea, it should be in stock right now but it isn't unfortunately. I'm about to build my own babytooth and I use the newbeedrone hummingbird f4 pro flight controller. I use it just because I saw kabab using it in a babytooth lol
I just put a few packs through the new DiamondF4 from happymodel . Good sized motor pads, 200mw vtx, and the UART is a bit easier to to hook the crossfire up to than the Crazybee Lite. I'm using NBD savage bee frame (Usb port access and 3mm carbon!) With caddx ant in a larvax canopy 42g dry with heavy old Eachine 1102's. Flies like a dream, regret putting off this build for so long. I wanna build a couple more now 😆.
What is the total price of this build? Great video btw!