You Won't Believe How EASY Brake Pad Change is on Dyisland Brakes!
HTML-код
- Опубликовано: 5 окт 2024
- Link to Brake Pads used in video on Amazon: amzn.to/4cd54cG
AliExpress Link: s.click.aliexp...
Yolin eBike
bike.shimano.c...
dy-island.com/
FTC: Some of the products linked above use income earning auto affiliate links, which means that if you click one of the links and purchase a products, I could receive a very small commission (at no additional cost to you) - Авто/Мото
Freego just made a new bike recently and it’s pretty cheap for the results it’s called the Freego X2 Off Road Dirt Electric Mountain Bike and a guy who made a video on it went 43 on it and he weighs 270 lbs
Freego x2 is like surron more of electric dirt bike and $2700. 60V and 6000w should go faster than 43 mph? I would not buy this bike as in my town cops cracking down on electric dirt bikes and kids wheeling them all around town
I want to change out my stock hydraulic brakes on my Q20 1000 watt, and I'm not sure if it has a cut off switch, and if so can you direct me to where it is because I see two wires, one from the fluid holder and one from the brake lever, I've done all your mods, now I want to work on a new brake system because of the limited brake pads for the Q20 hydraulic brake system thnx
Is there 2 cables coming from the brake lever? One is hydraulic line the other is cut off cable. Is the cable have connector that is red with 2 pins or yellow with 3 pins?
@BRichSolution I'm not sure if it's 2 or three pins haven't disassemble it yet, the only pin connector pin I see on my bike in the front is the pin connector to the front light, other than that I'm thinking it might be just a brake sensor that's coming out of the brake lever, and when I search on Amazon for brake systems, some have the connector and some don't, I just want to get rid of ridstar systems because of the limited to none exiting brake pads thx
Can you do a video of a 52 v battery upgrqde for the ridestar q 20? And combine it with the additional battery from previous video
Yes
People still care about that old ass bike lol
Cant wait to watch it👍@@BRichSolution
@jahbrake9791 couldn't afford a motor goat sadly
I cant get my brake pads in. I may have pulled or touched the line and now the piston is engaged
Use a screw driver to gently pry the pads apart and then install the brake caliper
I did that. Nope. I ended up opening the braking fluid drain and bled the brake to open it up
Lol why didn't you show readjusting the brakes since you put new pads in?? If this is supposed to be a a tutorial you left out half of the job lol
no adjustment was needed, the pads slide in and all was good