dude. how can you not show the installation? 😅 I'm over here wondering what the heck to do . wahhh so i dont got the ram clearance with the fan on the right, should i take it and move it to the other side? which way do i rotate it? should i rotate it counter clockwise so the fan on the right is now facing up? or should i rotate it once more and have the fan on the right now facing the left?
We leave the install out since it is very straight forward with their provided instructions! In the future we hope to be able to make dedicated install videos but again so many possible configurations we are not sure it would serve the purpose we or the audience would want! Happy to try and help: - Yup if you don't have the ram clearance and don't want to swap for low profile ram then yeah just move it to the other side if you have room. -Keep both fans the same way to air is being pulled through your cooler. So when you move the fan the front (pretty side) will now be facing the cooler when you mount it... does that make sense? - You won't rotate your cooler if that is what you are asking... Did that help? Send me a pic on twitter if you want me to look it over!
remove the fan from those clips, and shift them a few centimeters upward on the fins... then place the fan with the clips right there. issue of ram clearance solved
It should fit without any problems because 1. The fins on each side of the cooler are cut off at the bottom in order to give greater clearance around nearby motherboard components. 2. The metal spring clips that secure the fan to the fins on the side of the cooler are adjustable vertically, which means you can easily adjust the mount height of the fan on a fin by fin basis (roughly 2 millimeters per fin) so that the fan clears any nearby motherboard components such as your RAM. Check some pictures of the metal spring clips securing the fan to the fins, and you'll see what I mean. It's a very well designed CPU cooler.
this'd be overkill, just get a cheap thermalright cooler, like an assassin spirit v2 for like 16, i use it on a 5600 with max pbo limits enabled (125w) and it doesn't thermal throttle
@@seeking.eternity Hey man, appreciate the reply. Unfortunately where I live the cooler you mentioned is hella expensive around 60-70$. I used to use pbo but I saw my temps is hitting around 98 so kinda turned it off. Any now looking for a cpu cooler. I've seen reviews on the ak400 zero dark whatever it is, it's not expensive here around 40$ will get it if possible. And this cpu cooler the 620s is around 35$ that's why i was looking into it.
@@niladrisarkar1472 np that sucks about the price, thermalright where i am at (us) is known to be very cheap, but really good quality for the price tbh it's unbeatable for the price they even have aio's for like 36~, their prices are crazy maybe try looking at any of the other thermalright cpu coolers that use a 120mm fan, all of them should be good. (like assassin spirit, assassin king, etc.) i have built a lot of pcs and flip them, and i've used their coolers a lot or an id cooling se 214 xt is not bad as well but if you're not able to find any cheaper, this cooler for 36 right now isn't bad, but thermalright's more "expensive" coolers are better than it i think, like the peerless assassin or phantom spirit (they're about the same, i've used both)
important question: Is this cooler going to sag the motherboard??? i am concerned about its weight, which will be fixed in the middle of the motherboard, so it would try to pull out the motherboard if the case is kept in normal standing position... please respond asap
Yes! To remove the fan, you remove the two screws from each bracket with a Phillips head screwdriver. Cooler Master also includes 2 extra clips so that YOU can attach a 2nd fan(push/pull). Hope this helps! -MB
@@DigitalDavid I mean this is beefier i suppose and this is a bit of expensive. Like example ag400plus is 2k and 620s is 3.5k something I'm ready to get the 620s but is it worth the money
@@sakshamangane8422Hii, bro I m also looking a compatible cooler for ryzen 5 7600...and m very confused...I cant get an AIO rn ....which one did u choose ? And how's it performing ?
Bro i use this for r5 7600 and cuz i installed 32gb rams..I removed the front fan and stuck it on the back side in a way so that it does not effect the airflow...is that good ?
When my cpu is running on 5.1mhz and cpu utilisation is 50-60% the temps are 70°c...room temp was 34°c (it's kinda hot in our country and I cant use the ac all day cuz of high electricity bill), GPU temp was also 65°c at 99% usage (GPU is rx 6750xt) is this bad ??? I'm scared af cuz this is my first pc and I don't know much about overclocking, undervolting 😢
Hey. I mistakenly installed it the other way round where the Fans are pointed towards the exhaust of cabinet. Is that okay or should I change? Also If I wish to rearrange the cooler, do i have to reapply thermal paste?
dude. how can you not show the installation? 😅 I'm over here wondering what the heck to do . wahhh so i dont got the ram clearance with the fan on the right, should i take it and move it to the other side? which way do i rotate it? should i rotate it counter clockwise so the fan on the right is now facing up? or should i rotate it once more and have the fan on the right now facing the left?
We leave the install out since it is very straight forward with their provided instructions! In the future we hope to be able to make dedicated install videos but again so many possible configurations we are not sure it would serve the purpose we or the audience would want!
Happy to try and help:
- Yup if you don't have the ram clearance and don't want to swap for low profile ram then yeah just move it to the other side if you have room.
-Keep both fans the same way to air is being pulled through your cooler. So when you move the fan the front (pretty side) will now be facing the cooler when you mount it... does that make sense?
- You won't rotate your cooler if that is what you are asking...
Did that help? Send me a pic on twitter if you want me to look it over!
@@DigitalDavidstraight forward? Sure.. 'look at these cool, not-so-straightforward rgb colors for the first time plebs'
remove the fan from those clips, and shift them a few centimeters upward on the fins... then place the fan with the clips right there.
issue of ram clearance solved
I don’t understand how are people struggling with ram clearance when you can just move the fan upwards.
Bro my ram height is 40mm , will it fit?
It should fit without any problems because
1. The fins on each side of the cooler are cut off at the bottom in order to give greater clearance around nearby motherboard components.
2. The metal spring clips that secure the fan to the fins on the side of the cooler are adjustable vertically, which means you can easily adjust the mount height of the fan on a fin by fin basis (roughly 2 millimeters per fin) so that the fan clears any nearby motherboard components such as your RAM. Check some pictures of the metal spring clips securing the fan to the fins, and you'll see what I mean.
It's a very well designed CPU cooler.
Hey man I've been using r5 3600 with the stock cooler and now i would like to upgrade the cooler.
What will be a good cooler?
this'd be overkill, just get a cheap thermalright cooler, like an assassin spirit v2 for like 16, i use it on a 5600 with max pbo limits enabled (125w) and it doesn't thermal throttle
@@seeking.eternity Hey man, appreciate the reply.
Unfortunately where I live the cooler you mentioned is hella expensive around 60-70$.
I used to use pbo but I saw my temps is hitting around 98 so kinda turned it off.
Any now looking for a cpu cooler.
I've seen reviews on the ak400 zero dark whatever it is, it's not expensive here around 40$ will get it if possible.
And this cpu cooler the 620s is around 35$ that's why i was looking into it.
@@niladrisarkar1472 np
that sucks about the price, thermalright where i am at (us) is known to be very cheap, but really good quality for the price
tbh it's unbeatable for the price
they even have aio's for like 36~, their prices are crazy
maybe try looking at any of the other thermalright cpu coolers that use a 120mm fan, all of them should be good. (like assassin spirit, assassin king, etc.)
i have built a lot of pcs and flip them, and i've used their coolers a lot
or an id cooling se 214 xt is not bad as well
but if you're not able to find any cheaper, this cooler for 36 right now isn't bad, but thermalright's more "expensive" coolers are better than it i think, like the peerless assassin or phantom spirit (they're about the same, i've used both)
@@niladrisarkar1472 Get an Ag400 ( im prolly late )
@@sravans149 appreciate the reply mate.
I did not buy anything.
Advantage of being broke XD.
IS this better than the stock AMD Wraith Stealth?
Oh yeah! Much better!
How do you change the colour?
Using motherboard application, depends wich brands u use
important question: Is this cooler going to sag the motherboard??? i am concerned about its weight, which will be fixed in the middle of the motherboard, so it would try to pull out the motherboard if the case is kept in normal standing position...
please respond asap
I never had a problem with that myself. I can only speak from my experience though.
~B
@@DigitalDavid update: i fixed it and the bolt strength is good enough to hold the cooler without a sag...
@@DigitalDavidis this cooler enough for i5 12600k?
Thanks for the awesome vid
Thanks for the comment! Be sure to subscribe! -MB
Sounds loud if that matters to you
can you change the fans on this cooler?
Yes! To remove the fan, you remove the two screws from each bracket with a Phillips head screwdriver. Cooler Master also includes 2 extra clips so that YOU can attach a 2nd fan(push/pull). Hope this helps!
-MB
how do i change the color of the fans?
With your motherboard software!
Does anyone know how to change the colour of it
Can it handle . 12600k .Indian sammar temprature 42° in room..
*summer
Is this can hold ryzen 7 5800x3d ?
Which one is better compared to thermalright peerless assassin 120 and deepcool AG620?
Thermalright pa 120
Is this enough for an amd r5 7600x setup?
yes
Yes! -MB
Should i get a ag400 plus for 7600x or get this expensive one
They are both about the same price so at that point whatever you like best??
@@DigitalDavid I mean this is beefier i suppose and this is a bit of expensive. Like example ag400plus is 2k and 620s is 3.5k something I'm ready to get the 620s but is it worth the money
@@sakshamangane8422Hii, bro I m also looking a compatible cooler for ryzen 5 7600...and m very confused...I cant get an AIO rn ....which one did u choose ? And how's it performing ?
@@rahulchatterjee4328 never buy a aio just get a ak620 if you have the budget and enable pbo in bios
@@rahulchatterjee4328 which one u choose ?
Bro i use this for r5 7600 and cuz i installed 32gb rams..I removed the front fan and stuck it on the back side in a way so that it does not effect the airflow...is that good ?
When my cpu is running on 5.1mhz and cpu utilisation is 50-60% the temps are 70°c...room temp was 34°c (it's kinda hot in our country and I cant use the ac all day cuz of high electricity bill), GPU temp was also 65°c at 99% usage (GPU is rx 6750xt) is this bad ???
I'm scared af cuz this is my first pc and I don't know much about overclocking, undervolting 😢
If your temps and performance hasn't changed you should be fine!
@@DigitalDavid thanks dude
is this good cooler for ryzen 7 5700x3d ?
Did you buy it, if yes hows d performance ?
Hey. I mistakenly installed it the other way round where the Fans are pointed towards the exhaust of cabinet. Is that okay or should I change? Also If I wish to rearrange the cooler, do i have to reapply thermal paste?
Yes and yes
Yes and yes would be best!
Can I use this for i3 12100f my preference is gaming
yesss easily its really good
I using this Hyper 620s with AMD Ryzen 5 7500f. It's huge cooler than the AMD stock cooler. The price of this Heatsink is quite cheap in my country.
HOW ARE U CHANGING THE COLORS, I CANT, PLS HELP ME OUTT 😭
Looks way too big, I don’t think I’ll be able to install my ram with this thing on
Here are the exact dimensions! 5.39"L x 4.92"W x 6.1"H -MB
It's pretty adequate it works flawless I am not getting above 60 or 75 c
@@iaamvewhich cpu ?
@@iaamve ur cpu ?
Thank you
Welcome!
is this enough for an Ryzen 7 5700x? HELP ME PLS 😭😭
Yes!
Thank you.
another question else if u could help me.
will this be compatible with an Asus B550- A AC AMD RYZEN DDR4 AM4 motherboard?
😢
@@DigitalDavidThank you.
another question else if u could help me.
will this be compatible with an Asus B550- A AC AMD RYZEN DDR4 AM4 motherboard?
😢
@@fabrizzioirrarazabal8368aye bro I'm building a quite similar PC
@@fabrizzioirrarazabal8368 same question
Nice❤
Thanks 🔥
You're welcome