As a scuba diver and true lover of our beautiful oceans i really really appreciated this GORGEOUS piece of art!!! Never stop sharing yoour amazing taldnt with us!!!!!
Seeing projects like this it just AMAZES me as to the amount of really really talented people out there!!! Dont ever stop sharing your true talent with us Thank-you! It is vety much appreciated!!!
Thanks a lot dude. I'm glad you liked my work. 😊🤝 I appreciate it and wish you good luck in creating your miniature world. You can show how you do. I'm curious. If you have any questions write. 🤜
Hi amazing art work! ❤ Could you share how much resing in kg. Did you use for this project and how big the lamp is? Pls. To know how many kilograms of resin have been used. Many, many thanks!!
Hej. Thank you! Hey. From what I remember, less than a kilogram of resin. The lamp was about 25 cm high and 18 cm wide but not thick. Probably 4 cm. By the way, if you are not sure how much resin you will use, use the resin calculator :) teexpert-resin.com/pages/resin-calculator On this website you will also find the resin I use in this project.
Hey. Thank you for your opinion. I'm glad you liked it. I designed the fish in 3D and then printed them. If you watched carefully, you can see it in the video😉
Hej. Dzięki za opinię 😊🤝 Taaaa. ;) Jest przygoda:) Sporo już zrobiłem,ale w tym temacie często pojawiają się jakieś psikusy przy pracy:) Powodzenia! 😊🤝✌️
How did u create sparkles in the water? What does aceton do? How did you created the fish models? And were they real moss?These answers would be very helpful. Liked and Subscribed 😊
Hey, Thanks for subscribing ;) 1.Add a little perlescent powder dye to the resin. You can see here ruclips.net/video/euXnBjUmfL8/видео.html 2.Fish. This is shown in the video :) You can see here ruclips.net/video/zk2mIvh7V-A/видео.html I made a 3D model and printed it. 3. Acetone is used to clean the surface after sanding. It can also be used to degrease the surfaces. 4. Yes, this is real moss. Names reindeer moss and caribou moss.
When you add layers of resin to the first layer, do you wait till they’re fully dry or semi wet? Just wondering if there is a noticeable “wall”? I guess you would say in between the layers. Like can you see two lines going through the whole middle part where the layers join or is it all uniform if you get what I’m saying? Thanks! Insanely talented btw
Hi. Thanks for comment. When I add layers, I wait until the resin starts to gel. Then I can add figures. otherwise they would go to the bottom. If you add the resins at the right time, the lines should not be visible, but that doesn't matter. They are only visible from the side and top. They are covered by wood from the side. The lamp should look nice from the front and back:) you can see it clearly in the video when he adds figures/fish. By creating layers, you can achieve a cool effect by adding figures at different levels. You can also pour it all at once, but you must have resins for deep pouring and mount the figures on a transparent mounting first, as in this case ruclips.net/video/TyFPd-V7viE/видео.html
добрый день отличная и увлекательная работа) подскажите не совсем понятно каким образом делали пузырьки ? это камешки или ямочки зубочисткой не понятно цает разный на уровнях?
Hi. Thanks for the opinion. I'm glad you liked it. I'm sorry, but I don't quite understand what you mean exactly. Air bubbles are not visible. I used a toothpick/stick to paint tiny fish that run away. What may look like air bubbles are tiny pearlescent dyes. I added a little bit of it to the resin.
Hi John. Thanks 🤝 and sorry for the delay. Small break. This is burl wood. It is a disease that occurs on various types of trees. You can read about it here. en.wikipedia.org/wiki/Burl I buy them at home in Poland from my friends. Preferably wood after vacuum drying. You will also find them in your country at an auction or other place. Just remember that the wood for the resins must be dry 8 to 12% humidity. If you use wet wood, it will crack and bend while drying, and will release a lot of air bubbles when poured with resin. If you have any questions write. I will try to answer as soon as possible. Best regards! MW 🤝😊🤜
Hi. Thanks for comment ! Nice to hear it. The resin is really very good. Up to 10cm.One of the best I've worked on. I recommend . There's a link in the description if you want. Thanks again. Best regards.
Thanks for comment. It's a cool idea I have one such project but it's been lying unfinished for 2 years :) Maybe it's finally time to finish it 😊🤝 Thanks!
@@claycreations.byradhaHi. now i use anycubic photon ultra dlp . the fish for this lamp were printed on an older printer that I previously used, anycubic photon.
@@claycreations.byradhaHi . it's clear that the newer printer is better. photon ultra. But 3D printing is not simple. You need to learn how to do it and have patience at the beginning ☺️ Watch a video on RUclips, entering the name of the printer I gave you and then you will decide whether it is worth buying. is it good for you ☺️
Hi i loved the video do you sell the 3d fish or the 3d file would love to try my own version of this never done before but would like to try thanks@@magicwoodjewelry
Hey, it depends on who likes which effect. Sometimes I leave them on especially for water projects, but sometimes for other projects I use a resin vacuum pump. In this project, pearl dye is added, which may give the illusion of small air bubbles, but in fact it is pearl dye.
I think you linked the wrong thing for your resin. it takes me to a page offering for me to make 10 % rather than the actual product you want to recommend (to make that 10% referral fee)
Hey. Thanks for the information. It's actually a link to an affiliate program Here's a link to the resin if you want to use it teexpert-tech.com/collections/deep-pour-resins
Very Nice Work!!!
@@ДмитрийАнисовец-л1ы Thanks mate 🤝☺️
As a scuba diver and true lover of our beautiful oceans i really really appreciated this GORGEOUS piece of art!!! Never stop sharing yoour amazing taldnt with us!!!!!
Thank you!. I'm glad you liked my work. I appreciate it 😊🤝
Stunning
Thanks!😁🤝
These Ocean water lamps from you are so relaxing!
10:21 i like this edit 😁
Thanks! I'm glad you liked my montage ☺️🤝
That is gorgeous it's like having a piece of the sea
Thank you! Glad you liked it
that is really nice
Hi. As always thanks a lot for your comment 🤗
I really appreciate 🤝😊
Seeing projects like this it just AMAZES me as to the amount of really really talented people out there!!! Dont ever stop sharing your true talent with us Thank-you! It is vety much appreciated!!!
Thank you for your comments. Nice that you liked my works. I really appreciate that. Thank you! 😊🤝✌️
Awesome! I realy love Your miniature worlds!
Thanks a lot Vampi ! 🤗 Really nice to hear it 🤗 Thanks for your support. I appreciate it 😊🤝
It's like the Mariana Trench, but absolutely gorgeous! ❤
Hi. Thanks for comment .This is what my client requested :)
Thank you and I'm glad you liked it 🤝😊 🤜
This is a very cool night lamp project. You're a wizard.
👋 Thank you for your comment. I appreciate it.
I'm glad you liked my work. Thank you! 🤗
Precioso!! Una maravilla de trabajo, enhorabuena!
Gracias! 😁 Gracias por tus comentarios. 🤝😊✌️
Que espetáculo, verdadeira obra de arte, meus parabéns
Thanks Man ☺️🤝🤜
Super cool!
Thanks so much! 😊🤝
Fantastic.
Thanks a lot! 😊🤝
Thanks a lot! 😊🤝
I am also trying to make night lamp like this but your work is outstanding bro ❤❤❤❤
Thanks a lot dude. I'm glad you liked my work. 😊🤝 I appreciate it and wish you good luck in creating your miniature world. You can show how you do. I'm curious. If you have any questions write. 🤜
Creativity at it's best ❤
Thanks for your comment! Nice that you liked it 😊🤝✌️
This was an incredible piece of art! Beautiful.
Thanks Jack! 😊🤝🤜
Just amazing work.
Well done man👏👏👏
Thanks Mate!☺️🤝
Stunning!
Una verdadera obra de arte
Gracias! :) Nice that you liked my work.
I invite you to subscribe and check out my other works;)
Beautiful 🤩 well done 👏🏼
Dziéki Brat! Thx! 🤝
Красота ❤❤❤🎉
Thank you ☺️🤝
Hi amazing art work! ❤
Could you share how much resing in kg. Did you use for this project and how big the lamp is? Pls.
To know how many kilograms of resin have been used.
Many, many thanks!!
Hej. Thank you! Hey. From what I remember, less than a kilogram of resin. The lamp was about 25 cm high and 18 cm wide but not thick. Probably 4 cm. By the way, if you are not sure how much resin you will use, use the resin calculator :) teexpert-resin.com/pages/resin-calculator On this website you will also find the resin I use in this project.
와 진짜 능력자다..
Thank you. I'm glad you liked my work. Thank you for your opinion ☺️🤝
Nossa voce arrasou com seus trabalhos. Parabéns! Onde voce consegue esses peixinhos?
Hey. Thank you for your opinion. I'm glad you liked it. I designed the fish in 3D and then printed them. If you watched carefully, you can see it in the video😉
@@magicwoodjewelry Magnífico. Agora entendi que é impressora 3D. Sucesso você é um grande artista! Parabéns.
Just beautiful!
Thanks so much!
super!!!!
Thanks!☺️🤝
Super robota. Bardzo ładna. Zaczynam się bawić żywicą. Dużo nerwów i błędów jak narazie 😊 Tym bardziej doceniam👍
Hej. Dzięki za opinię 😊🤝 Taaaa. ;) Jest przygoda:) Sporo już zrobiłem,ale w tym temacie często pojawiają się jakieś psikusy przy pracy:) Powodzenia! 😊🤝✌️
It turned out beautiful, what is the name of the mold in which it was cast? Thanks.
Hey. Thanks for the feedback
Made of foamed PVC
but I glue thin plastic on it to get a shine
you can also use thicker plexiglass
Очень красиво, медитативно, завораживающе! Повторить бы ))
Spasibo! 😊 I'm glad you liked my work 🤝 ✌️
How did u create sparkles in the water? What does aceton do? How did you created the fish models? And were they real moss?These answers would be very helpful. Liked and Subscribed 😊
Hey, Thanks for subscribing ;)
1.Add a little perlescent powder dye to the resin. You can see here ruclips.net/video/euXnBjUmfL8/видео.html
2.Fish. This is shown in the video :) You can see here ruclips.net/video/zk2mIvh7V-A/видео.html I made a 3D model and printed it.
3. Acetone is used to clean the surface after sanding. It can also be used to degrease the surfaces.
4. Yes, this is real moss. Names reindeer moss and caribou moss.
@@magicwoodjewelry Highly appreciate your response. Looking forward to more videos.
Superb
Thanks so much! 😊✌️
Realmente hermoso, creaste y capturaste un momento en el tiempo.
Gracias! I'm glad you liked my work 🤝😊 Kind regards. 🤜
When you add layers of resin to the first layer, do you wait till they’re fully dry or semi wet? Just wondering if there is a noticeable “wall”? I guess you would say in between the layers. Like can you see two lines going through the whole middle part where the layers join or is it all uniform if you get what I’m saying? Thanks! Insanely talented btw
Hi. Thanks for comment. When I add layers, I wait until the resin starts to gel. Then I can add figures. otherwise they would go to the bottom. If you add the resins at the right time, the lines should not be visible, but that doesn't matter. They are only visible from the side and top. They are covered by wood from the side. The lamp should look nice from the front and back:) you can see it clearly in the video when he adds figures/fish. By creating layers, you can achieve a cool effect by adding figures at different levels. You can also pour it all at once, but you must have resins for deep pouring and mount the figures on a transparent mounting first, as in this case ruclips.net/video/TyFPd-V7viE/видео.html
Какая красота
Spasibo😊🤝
добрый день отличная и увлекательная работа) подскажите не совсем понятно каким образом делали пузырьки ? это камешки или ямочки зубочисткой не понятно цает разный на уровнях?
Hi. Thanks for the opinion. I'm glad you liked it.
I'm sorry, but I don't quite understand what you mean exactly.
Air bubbles are not visible. I used a toothpick/stick to paint tiny fish that run away. What may look like air bubbles are tiny pearlescent dyes. I added a little bit of it to the resin.
15:07
Awesome job! Really inspiring! Great imagination! What kinda printer do you use to make figures?
Hi. Thanks for comment. Nice that you liked my work 🤝😊 I printed these on anycubic photon. Now i use photon ultra dlp
Txs for the reply! Pls continue sharing your inspiring ideas!
❤это великолепно 🎉🎉🎉🎉🎉
Hi. Thanks for the opinion!
This is so awesome! May I ask where one can acquire these types of wood pieces? Once I find the wood, I'm ready to try my own!
Hi John. Thanks 🤝 and sorry for the delay. Small break.
This is burl wood. It is a disease that occurs on various types of trees.
You can read about it here. en.wikipedia.org/wiki/Burl
I buy them at home in Poland from my friends. Preferably wood after vacuum drying. You will also find them in your country at an auction or other place.
Just remember that the wood for the resins must be dry 8 to 12% humidity.
If you use wet wood, it will crack and bend while drying, and will release a lot of air bubbles when poured with resin.
If you have any questions write. I will try to answer as soon as possible.
Best regards! MW 🤝😊🤜
What did you paint the wood with before pouring? Thanks!
Hi. It is painted with resin. Blocks air bubbles escaping from the wood.
Amazing bestie ❤❤❤❤
Thanks a lot Maggie 😊🤝
@@magicwoodjewelry your welcome bestie 🥰🥰🥰🥰
Очень красиво. Сколько ушло эбоксидной смолы на проект?
Privet. Spasibo! 🤝 About 0.7 l with hardener.
❤❤❤
@@Pooja_MakeupZone02894 Dzięki! THANKS! ☺️☺️
Wow beautiful, What do you think about the resin you use in this video? is it good?
Hi. Thanks for comment ! Nice to hear it.
The resin is really very good. Up to 10cm.One of the best I've worked on. I recommend .
There's a link in the description if you want. Thanks again. Best regards.
@@magicwoodjewelry Thanks
@@jaimezapatagomez ☺️🤝✌️
Do a reef one with fish and coral
Thanks for comment. It's a cool idea
I have one such project but it's been lying unfinished for 2 years :)
Maybe it's finally time to finish it 😊🤝 Thanks!
@@magicwoodjewelry yeah can't wait to see it 😁
What ia the 3d printer yiu have used
@@claycreations.byradhaHi. now i use anycubic photon ultra dlp . the fish for this lamp were printed on an older printer that I previously used, anycubic photon.
@@claycreations.byradha store.anycubic.com/products/photon-ultra now i use this.
Thankyou but which is more easy to use .
@@claycreations.byradhaHi . it's clear that the newer printer is better. photon ultra. But 3D printing is not simple. You need to learn how to do it and have patience at the beginning ☺️ Watch a video on RUclips, entering the name of the printer I gave you and then you will decide whether it is worth buying. is it good for you ☺️
Hi i loved the video do you sell the 3d fish or the 3d file would love to try my own version of this never done before but would like to try thanks@@magicwoodjewelry
I notice that alot of your creations are leaving bubbles behind. Is this by design.
Hey, it depends on who likes which effect. Sometimes I leave them on especially for water projects, but sometimes for other projects I use a resin vacuum pump. In this project, pearl dye is added, which may give the illusion of small air bubbles, but in fact it is pearl dye.
Would you sell/ship the trevally figures?
Hi. I designed and printed them just for the purpose of creating this lamp
Were you get the fish
Hey. It is shown in the video ;) I made a 3D design and then printed it in 3D ;) ruclips.net/video/zk2mIvh7V-A/видео.html
😍👍
Thank you! 😊🤝
Do you have the STD or OBJ file for sale for the 3d fish?
Hi. I don't have it brother. I did it just for this project.
@@magicwoodjewelry Well.. not a problem. Your work is BEYOND cool. TY for the response.
Que madeira vc usou
This is burl wood, but I don't know exactly what species. I had this piece for several years. Probably maple or poplar
I think you linked the wrong thing for your resin. it takes me to a page offering for me to make 10 % rather than the actual product you want to recommend (to make that 10% referral fee)
Hey. Thanks for the information. It's actually a link to an affiliate program
Here's a link to the resin if you want to use it teexpert-tech.com/collections/deep-pour-resins
Love the project, but had to turn my volume OFF! That music is maddening after 2 mins.
Thanks for comment. Hmm, I understand. Music is a matter of taste. I get that you might not like it :) 😊🤝
Tout le monde s'en fout tout cela est minable.