@@techgod-h7b depends on the motor of the bike (power output) and weight of person on bike. That’s why E bikes like “Surrons” or talarias go like 60 mph, because of the very high wattage motor they have.
Hello, we've noticed your question about our product. Here's the information you're looking for. According to your question, it depends on each customer's needs, if you need to remove the speed limit to get a higher speed, you can follow our video tutorial and it will stay at that speed after the setup is done. If you don't need to get a higher speed, you can reset it to limit the speed to 25MPH. Hope this can help you.
Can't raise it as it is but you can get handlebar stems that adjust or have a higher angle. Just replaced my stem which is 90mm and 17 degree angle with one from Amazon which is 90mm and 35 degree angle This puts the bars up about an inch or so and about 1/2 inch closer to you.
Same. Also, I get an “Error 22” when I turn on my PAS led display. Any idea what that means? Did your bike come with screws for the kickstand? Mine didn’t, just got it a few days ago and was busy until tonight. Mostly simple to put together. I’d make some changes to the included manual. I have no idea what this code means though..
Update: I talked with support and they sent the kickstand screws as quickly as possible and were very professional about it. Also, the error 22 was due to one chord within the Velcro wrapping not being connected. lol. Not sure about the other settings, haven’t much needed to bother with them.
I went into these settings and changed a bunch of things without realizing what I was doing and now my bike doesnt run like it did on day one. Can anyone tell me what each setting is for or how to factory reset it? I made an impulsive mistake by changing these settings and now I really regret it.
Try resetting it to factory. Get into the setting menu, press and hold the ‘lights’ & ‘+’ buttons for 2 seconds, press + or - to select ‘dEF-Y’ and press ‘I’ to confirm . ‘dEF-0’ will show on the display and then it will restart.
@@CheekyJason turn up your tire diameter, it worked for me on my other bike with the same display, just know then when you turn up the tire diameter setting (tire thickness) the speedometer won’t be accurate, you’ll have to adjust the speedometer via the speed magnet settings 👍
It worked for my electric bike 👍
will this make certain e bikes go 62 mph if you set it to that high of speed
@@techgod-h7b depends on the motor of the bike (power output) and weight of person on bike. That’s why E bikes like “Surrons” or talarias go like 60 mph, because of the very high wattage motor they have.
Does that speed limit stick or do you have to do it every time you start the bike up? Also, what does each setting control?
Hello, we've noticed your question about our product. Here's the information you're looking for. According to your question, it depends on each customer's needs, if you need to remove the speed limit to get a higher speed, you can follow our video tutorial and it will stay at that speed after the setup is done. If you don't need to get a higher speed, you can reset it to limit the speed to 25MPH. Hope this can help you.
How do I adjust the steering I want it higher
Can't raise it as it is but you can get handlebar stems that adjust or have a higher angle. Just replaced my stem which is 90mm and 17 degree angle with one from Amazon which is 90mm and 35 degree angle This puts the bars up about an inch or so and about 1/2 inch closer to you.
Thank you so much Patrick for responding can you please send me the link to the Amazon product you bought?
what are all the other setting for i just bought a bike and i wanna know please.
Same. Also, I get an “Error 22” when I turn on my PAS led display. Any idea what that means? Did your bike come with screws for the kickstand? Mine didn’t, just got it a few days ago and was busy until tonight. Mostly simple to put together. I’d make some changes to the included manual. I have no idea what this code means though..
By the way, the bike I’m referring to is the Seeker (not the Seeker S). Which do you have?
Same here.
Update: I talked with support and they sent the kickstand screws as quickly as possible and were very professional about it. Also, the error 22 was due to one chord within the Velcro wrapping not being connected. lol. Not sure about the other settings, haven’t much needed to bother with them.
You can find a user manual on their website which has all the settings
I went into these settings and changed a bunch of things without realizing what I was doing and now my bike doesnt run like it did on day one. Can anyone tell me what each setting is for or how to factory reset it? I made an impulsive mistake by changing these settings and now I really regret it.
Would you write what each one says currently? Maybe I can check mine after I figure out how to again and I can tell you what mine are set to.
Try resetting it to factory. Get into the setting menu, press and hold the ‘lights’ & ‘+’ buttons for 2 seconds, press + or - to select ‘dEF-Y’ and press ‘I’ to confirm . ‘dEF-0’ will show on the display and then it will restart.
Slow this video down, it shows each default setting.
Even after raising speed setting the bike will only reach 21 is there a way for it to go faster?
Probably have to get a higher watt motor, changing the top speed doesn’t guarantee your bike will go faster, it’s all the motors job for speed.
@@kamara- it limits the speed to 23 for me even when i unlock it
@@CheekyJason turn up your tire diameter, it worked for me on my other bike with the same display, just know then when you turn up the tire diameter setting (tire thickness) the speedometer won’t be accurate, you’ll have to adjust the speedometer via the speed magnet settings 👍
@@kamara- how do I do that?