Видео

Hello there, thanks for reach out. The charging port is located underneath the battery.

Oh It didn't work. :(

Hello there, thanks for reach out. With the removal of the speed limit it can reach a top speed of around 25 mph. 25 mph is the top speed, sorry it can not reach to 32 mph. Hope this can help you~☺

It helps to remove the pedaling assisted and it's not like putting it when pedaling it doesn't go on.

Hello there, thank you for contacting Likebike. Please send your question and order number to our technical team at support@likebike.bike, our professional technicians will solve the problem for you as soon as possible. Thank you for your support and understanding.

What you get? I've been thinking of getting one

Hi there, Thank you for your order and for sharing your concerns. We assure you that we are a legitimate company with a commitment to quality and customer satisfaction. If you have any questions or need assistance, feel free to reach out to our support team. We're here to help! Best regards, Likebike

Just ordered...what were your challenges? Did you ever get it assembled?

Hello, we've noticed your question about our product. Here's the information you're looking for. According to your question, it depends on each customer's needs, if you need to remove the speed limit to get a higher speed, you can follow our video tutorial and it will stay at that speed after the setup is done. If you don't need to get a higher speed, you can reset it to limit the speed to 25MPH. Hope this can help you.

That was the worst response in history Yes it sticks if you change it it is saved that way until you change it again

Hello there! Thank you for your interest in our product and for reaching out with your question！Regarding your question, if the battery shows a red light it's charging and a green light means it's full.Any further questions or details, please feel free to let us know!🙂

@@techgod-h7b depends on the motor of the bike (power output) and weight of person on bike. That’s why E bikes like “Surrons” or talarias go like 60 mph, because of the very high wattage motor they have.

@@kamara-I’m not talkin bout surron/talaria I’m talkin bout my bike i have zm

@@techgod-h7b yes I’m sayin each bike has a certain motor wattage resulting in top speed. Not every e bike will hit 62 because of the size of the motor, I was just using surrons and such to relate. If you have a 750 watt motor for example, you’re only hitting like 28-30 mph max regardless if the speed limit is off or on. Hope it makes more sense.

Same bro, I bought like 1 hour ago, I'm still can't believe it. Maybe a mistake or something, but for 150, I couldn't resist.

@@emmanuellora4362 fr i cant wait it says july 15 to aug 2 but the reviews say come faster then u think

@@emmanuellora4362how

@@emmanuellora4362how

@@emmanuellora4362I got one to but I have no tracking number

Probably have to get a higher watt motor, changing the top speed doesn’t guarantee your bike will go faster, it’s all the motors job for speed.

​@@kamara- it limits the speed to 23 for me even when i unlock it

@@CheekyJason turn up your tire diameter, it worked for me on my other bike with the same display, just know then when you turn up the tire diameter setting (tire thickness) the speedometer won’t be accurate, you’ll have to adjust the speedometer via the speed magnet settings 👍

@@kamara- how do I do that?

I have two of these bikes and set at 32mph ,which is maximum ,one does 24.5 mph, the other I've only got 22mph out of it, all the settings are the same on both bikes.

It’s on their site in the user manual

Would you write what each one says currently? Maybe I can check mine after I figure out how to again and I can tell you what mine are set to.

Try resetting it to factory. Get into the setting menu, press and hold the ‘lights’ & ‘+’ buttons for 2 seconds, press + or - to select ‘dEF-Y’ and press ‘I’ to confirm . ‘dEF-0’ will show on the display and then it will restart.

Slow this video down, it shows each default setting.

I have the factory settings written down if you still need them

0:33 ​@@olds3945

Can't raise it as it is but you can get handlebar stems that adjust or have a higher angle. Just replaced my stem which is 90mm and 17 degree angle with one from Amazon which is 90mm and 35 degree angle This puts the bars up about an inch or so and about 1/2 inch closer to you.

Thank you so much Patrick for responding can you please send me the link to the Amazon product you bought?

Cap

Play this video at .25 speed, and match your bike to each parameter. Example: 01 is 01 02 is 48 03 is 0-5 04 is in 28 05 is 01 06 is 32 07 is 220 08 is run- F 09 is 02 10 is PAS 12 11 is 00 12 is 01 13 is PSd-n OR Psd-y 13 is

,36v not 48v, 4- 26 inch ,7 220A, 14 5L 10

did you find out how to?

@@matteotan there is 14 preset factory settings ,I know them ,is your ebike working ?

@@45rockinwax i can’t access anything because i forgot the password can you tell me a factory reset?

I just got one can’t ride it yet because the one I got at Walmart Front wheel came off when I was going 15MPH don’t get one From Walmart a week later I got a miscellaneous Tear in my Left leg right now I’ll Keep you posted😊

@@cobraxtsc2424what’s the recent postage?

Haz podido quitarle el paswr

No e podido encender mi bicicleta alguna recomendación

Why?

could you elaborate?

Did u fix it

@@studioscripts5182 I did. I figured the wires inside of the Velcro wire protector were all connected because the PAS system itself was on, but apparently one chord wasn’t connected at all. Plugged it in and haven’t had a single problem since. Although, they never sent me the two bolts for the kickstand so that’s been pretty irksome. Otherwise it’s an amazing bike. I’m nearly up to 220 miles on it

Can u go up steep hills w the motor no pedaling. Or does the bike really slow down or give out👀

@@lifeisthedash I find that it helps to have already picked up ample momentum then as it starts to slow lower it from 5 down to three or two and pedal as hard as you would with a bike. You don’t want to stress out the motor anyway. For the hill I’m using as reference to answering your question this is pretty much what has to happen because if the bike is set to 5 (top gear) and the PAS system says I’m going 16 or less then just go ahead and lower down to 3 or two. The motor is already not very big and doesn’t have a whole lot of output, you’re just going to stress it out til something in it, or above or below it, to compensate and potentially break. Also, I find that if I’m using the electric and light to heavy pedaling that it’s fine to have the actual chain setting on 7 but if you’re just pedaling then turn it down to 6 to avoid that chain slipping thing that happens… does that happen for you? It’s quite jarring and not something you’d not notice if it has happened lol.