What can I say! That I have to give you an A-plus, excellent ability & a great demostration. One way or the other we have to save our planet and this's a great example to follow and apply. Thanks!
Amazing Video. Could you please add the link of all the pieces you got as I would also like to try (not a technical person but still like to try to follow your video). Thank you
Awesome video. Straight shot, to the point with no BS filler. And easy to follow. The icing on the cake was the socks with the flops. Put it right over the top for me !! Good work, and thank you.
I been wondering how I was gunna link my mottor to my back without the paddles spinning. Didnt know I could just add a second gear that easily appreciate the info and u showing us how u do it.
It is very well thought out and done. Congratulations. I have only one small suggestion: mount the gearbox and the original chain. When you no longer have battery power, use the bike by changing the pedal sheets.
You could get a lot more performance from that thing with a bigger gear spread (i.e put a larger gear on the wheel). From motor to wheel it looks like the gearing is basically 1:1 so you're not benefitting from any torque multiplication.
@@rayhughes8240 Mine lasted all the way till i got to work (which is about a 2-3 hour ride) then i had to peddle home after my shift ended, Also i don't have this engine anymore it stopped working for some reason and i got a gas powered one that i still currently use
Why can't every other video I need be as good as this one? This is perfect, I tried watching something earlier today and the guy kept apologizing for how he had nowhere to put his phone (camera) but "really trying"to make a great video... I thought "no you're not, half the time he was attempting to hold it under his chin so he could use both hands 🤦. Anyway great video man, thank you
Hey,Great video.Trying to emulate this in my bike can you be kind enough the list down the specification of the parts needed for this project ?? So I can go around and shop them ! Thanks a lot in advance !
Here for the same actually. This has got to be the most minimal e-bike DIY I've seen yet! I have a simplistic fixed gear bike and I'd like to convert it to an e-bike without too much bulk.
I wish that you would have put the motor on the other side or on the front fork. Was it a 21 speed? Try a single speed rear wheel on the front fork and pedal home when you run out of juice. Or go bicycling really far and zoom home with 🔋 power. What do you think 🤔 😏?Very impressive!!!!
@@P4TRICCS In my opinion it wouldn’t be better on the front bc v -makes turning while accelerating wonky -less traction -weight is unbalanced towards the front -less stealthy/obvious it’s electric
The gear system is used both to develop high speed and also to have a lot of effortless traction for steep climbs or headwinds, remove the gears to install an electric motor (which as far as you have shown does not develop great speed) and more if necessary. invest a good amount of money to install that system... I think it is not a good idea
Nice job, but it is better to add something so that electricity is cut off from the engine when you press the brakes in order to not create resistance to rotation of the engine if you press the brakes while the engine is spinning because that may damage the engine
Controller will limit the current going to the motor, should prevent it getting damaged. Simple ebike brake lever with a switch in it can be used with that controller to cut off the power when braking.
i like it and much better if you add the link and the details of the item you added to your bike so that we have the idea what we need to buy so that we can do what you shared thank you :)
I agree with the video, even so, I prefer to continue with my bromtom bike with the Aston Rider engine under pedal box, it runs at more than 23mih x for less than $ 300!
Always the same for me. Who wants to put a tiny battery on a bike, ride for 15 minutes and go home? Even if I have to pull a trailer with some big batteries, if I want to go 100 miles and then turn around come home,I can. I say that's the future of this invention.
This is the best video so far no too much talking just pure logically informative tutorial I love this video.
You right
Much simpler then all those others with welding involved. Thanks
What can I say! That I have to give you an A-plus, excellent ability & a great demostration. One way or the other we have to save our planet and this's a great example to follow and apply. Thanks!
Hello,
You are the only one to show the normal mount of the free wheel !
thank you for this ! :)
Fantastic, making Bafang work on the rear wheel, I wanna do the same!
Amazing Video. Could you please add the link of all the pieces you got as I would also like to try (not a technical person but still like to try to follow your video). Thank you
He used a conversation kit that can be bought at any online shops
@@greesybakon9978 can i get a link for one thanks bro
Ok but that kit doesn't come with the 2 pieces that are put on instead of the factory freewheel assembly
Can you tell me those parts please
@@greesybakon9978 oh
out of every youtuber about conversion bike.... only you that show battery installation
❤🎉no talking straight standing on business. Great person
Best electric bike i ever seen 👍😎 Good job on that bike 👍
Awsome thanks for your help 😁😁😁😁😁😁
Awsome, very simple, from Indonesia.
I have no idea of where you got those one-way sprockets, but thanks for showing how to take off a cassette!!!
Beautiful video tnx
Awesome video. Straight shot, to the point with no BS filler. And easy to follow. The icing on the cake was the socks with the flops. Put it right over the top for me !! Good work, and thank you.
I been wondering how I was gunna link my mottor to my back without the paddles spinning. Didnt know I could just add a second gear that easily appreciate the info and u showing us how u do it.
How expensive are the gear and the motor?
@@Haske1 maybe 130usd
I also assemble a child electric bicycle from a dynamo wiper and it is very safe to drive
10 minutes and your done!!
No some parts he speed up
By editing
You’re*
@@Massive_Manchild I'm lazy, how did that apostrophe get in there? I didn't do it
Yacapu❤🎉
It is very well thought out and done. Congratulations. I have only one small suggestion: mount the gearbox and the original chain.
When you no longer have battery power, use the bike by changing the pedal sheets.
No
Semma attraction bro
انا اول مرة ارى مثل هذا الدينامو بصراحة جديد وفيه عبقرية
exelente....es la mejor adaptacion que he visto....mi admiracion y agradecimiento
Cuanto cuesta ese Kid
Your idea is very good
Very goodI like this video. Thanks
good job bro 💪🏽🔥
You could get a lot more performance from that thing with a bigger gear spread (i.e put a larger gear on the wheel). From motor to wheel it looks like the gearing is basically 1:1 so you're not benefitting from any torque multiplication.
Don't agree with " amazing diy " but it is a very good effort .
good job ottimo lavoro amico mio.
I’ve been using my bike with this thing for quite sometime now, going to and from work instead of driving saved quite a bit on gas by doing so
I have just found this video. Can you tell me your average range on a full charge please?
Thank you
@@rayhughes8240 Mine lasted all the way till i got to work (which is about a 2-3 hour ride) then i had to peddle home after my shift ended, Also i don't have this engine anymore it stopped working for some reason and i got a gas powered one that i still currently use
@@fintherebel5000 Thank you for the reply mate. much appreciated
Why can't every other video I need be as good as this one?
This is perfect, I tried watching something earlier today and the guy kept apologizing for how he had nowhere to put his phone (camera) but "really trying"to make a great video... I thought "no you're not, half the time he was attempting to hold it under his chin so he could use both hands 🤦.
Anyway great video man, thank you
great guys ...
very good content👍👍👍
V nice work 👍👍👍
Nice your video
Awesome video.
Donde lo puedo comprar en la CDMX xfa indicarme
Best E-Bike conversion on the Tube! Congrats! Are the freewheels you use two different ones? Thanks
AWESOME!!!!
Thank you
Hey,Great video.Trying to emulate this in my bike can you be kind enough the list down the specification of the parts needed for this project ??
So I can go around and shop them !
Thanks a lot in advance !
I need same purpose
Same
Here for the same actually. This has got to be the most minimal e-bike DIY I've seen yet! I have a simplistic fixed gear bike and I'd like to convert it to an e-bike without too much bulk.
Владимир Минка самый дешёвый вариант электровелосипеда на ютубе
nice thanks
i like
video
awesome brother
👍👍👍👍Qué chingoneria
Mano te felicito ese motor tiene una fuerza inmensa.
Mga anak ko palagi nyong kasama mama ninyo pati papa ninyo palagi nyong kasama ako mahal na mahal ko kayong mga anak ko 💜
amazing video but flip flops with socks are crazy
WWWASAOOO YOURE A GINIES WITH THE CHEAPEST WAY TO MAKE ANY 5 SPEED IN TO E BIKE😊😊😊
How fast will it go
I wish that you would have put the motor on the other side or on the front fork. Was it a 21 speed? Try a single speed rear wheel on the front fork and pedal home when you run out of juice. Or go bicycling really far and zoom home with 🔋 power. What do you think 🤔 😏?Very impressive!!!!
I know it's and old comment but can you tell me why would it be better on the front wheel?
@@P4TRICCS In my opinion it wouldn’t be better on the front bc v
-makes turning while accelerating wonky
-less traction
-weight is unbalanced towards the front
-less stealthy/obvious it’s electric
I rather make it all wheel drive
The gear system is used both to develop high speed and also to have a lot of effortless traction for steep climbs or headwinds, remove the gears to install an electric motor (which as far as you have shown does not develop great speed) and more if necessary. invest a good amount of money to install that system... I think it is not a good idea
Meri super good
Good work
Love it.
Make it charge while it pedals, try doing a stoppie with dat bike, but still. Good work, ill see if i can do sum
wow nice!!
Amazing idea 9:08
Nice video. But please, never ride on flip flops. It hurts my toes just watching.
Some links to the items would be awesome. Looks like a fun project.
Where can I buy the motor or the kit??? Nice project Thanks
सुपर
👍👍
Wah mantap, ini dimana
Nice creative but I rather walk if I'm gone ride that slow 🐌
Top video ♥️♥️♥️♥️
Nice job, but it is better to add something so that electricity is cut off from the engine when you press the brakes in order to not create resistance to rotation of the engine if you press the brakes while the engine is spinning because that may damage the engine
Controller will limit the current going to the motor, should prevent it getting damaged.
Simple ebike brake lever with a switch in it can be used with that controller to cut off the power when braking.
Show de bola muito bom parabéns
Which kit is this? Can you link it to where you bought it?
এই পদ্ধতি ভিডিও ৰ বাবে ধন্যবাদ
এনে ধৰনৰ পদ্ধতি ত উবেলদিং
নকৰাকৈ সমৰ্থ হৈছে ধন্যবাদ
Very very good
Thanks 🙏
Where can I buy motor electric set ? Can you tell me the store that sale it?
ياأخي اين اجد مثلها جزاك الله خيرا
nice video👍
Thank you
Hello how much sh.
From in Tanzania
keren banget coeg :D
Aww snap going to make
i like it and much better if you add the link and the details of the item you added to your bike so that we have the idea what we need to buy so that we can
do what you shared thank you :)
ดีเยี่ยมจังเลย
Do you have a parts list?
36v 350w motor
go to 3:56 - 4:02 for battery
I like it
Nic sir I am Indian
Thank you
Looks great 👍 and easy to use please 🙏🙋♀️price 😃
Prawdziwy elektryk.
Awesome video. I love all diy.
Km one time charge ?
Is there any way to make one of the 7 sprockets loose with the motor and the rest for pedaling
Great video
Thank you 🙏
How fast can go? Nice video 😬
Was it on at the end?
interesting I watched your video from PNG and I am interested but I wonder if you do build and sell them.
süper(TURKEY)
Excelente donde consigo el motor para la bicicleta
hello, excellent video, the battery is not visible, could you please tell me the characteristics, thank you.
Hi
You can by this on eBay here is how to find it ruclips.net/video/lWWnnkf9CoE/видео.html
SUPER
I agree with the video, even so, I prefer to continue with my bromtom bike with the Aston Rider engine under pedal box, it runs at more than 23mih x for less than $ 300!
Cool
Amazing
can i activate the motor and pedal at the same time?
What kind of battery you use??
Nice idea but I have a question if the bicycle is on motion the battery keep on charging or it should be charged by charger.
With charger 🔋🔌it's don't have self charge
OK merci
OK
where can i find the sprockets?
Молодец
nice video....greeting from Bali Indonesia, can youshare link where you bought the bldc motor?
whats the name of pice you installed between the 2 freeweels?
OK good wedos, kit Khan sa milna ha
Always the same for me. Who wants to put a tiny battery on a bike, ride for 15 minutes and go home? Even if I have to pull a trailer with some big batteries, if I want to go 100 miles and then turn around come home,I can. I say that's the future of this invention.
Very nicely done. I would love to build one. Do you have the links where you bought all the parts?
0WQqqqqeqq..
The hardware store.
@@chotasardar7340 la ferreteria
Amazon is one place, $300, but I bet you can probably get it for $150 or $200 on other websites, though haven't checked.
Boooo u didn't put a link to the electric thing and the tools that I need