Hell yea, looks really good man. Just picked up a running and pretty solid 95 for $400. Perfect extra bike that will get a plate too. Keep up the good work.
Hell yeah, and thanks man! The one I built before this one was a running 91 I got for $550. Still probably the most fun and best handling bike I’ve owned.
The light I got off amazon, it wasn’t very bright so I bought some LED bulbs with it. The headlight was only $19.99 and the bulbs were $12.99 for two. The fork covers I also found on amazon and I bought the longer style. They were a little pricey but they’ll last forever at $26.95.
I actually got that one off amazon. I was skeptical about how it would turn out but it ended up looking great. I did update the bulb to an LED because the bulb that came with it was not bright enough. The tips I would give is find a manual and follow it. If you come up with any questions, google your exact questions because chances are it's been asked before! Good luck!
Thanks! I was able to find some on eBay luckily. I believe I had to piece some of it together. You may check rockymountainatvmc.com , I have good luck there too!
First I clean them with something that will evaporate easily that contains alcohol. Then I spray just a slight amount of soapy water and it makes it easier to move around and get the air bubbles out and when it dries it will still stick. Then I spray SC1 on it to make it shine and less susceptible to collecting mud.
@doublewvideos3474 oh so lucky. I just bought a 2001 kdx 220r. It's all stock. I have to change the piston to a weisco. Suprised the original lasted so well. Was takin real good care of by this old man. And I'm replacing the stock exhaust and header,. Was going to change out the pwk33 carb to a 35. But was told it's not needed, if im just trails riding. So I'll keep that. Otherwise not a bad bike.
@travisl5125 thats awesome! To be honest, there’s usually less worry when you get a complete stock bike. Either way they’re great bikes. The KDX 200 was my favorite trail bike so far but the parts were way too hard to find. The 220 has more power and easier to find parts. On the carb, I’d say stock is fine, just get it jetted right and she will have plenty of power. Keep an eye out on marketplace and eBay for exhaust, can usually get a good deal.
I miss my kdx so much, I wish Kawasaki would bring it back as a 300... it was a great woods bike. I just wanted more power
I miss my KDX 200 the most! I loved it, just couldn’t find parts.
@@doublewvideos3474what parts couldn’t you find..?
@JDRockinfeller I’ll sell you mine 😂
Nice, I like it all bur especially like the new bars and hand guards.
Same! I feel like they really topped it off. The hand guards are a must have too
Hell yea, looks really good man. Just picked up a running and pretty solid 95 for $400. Perfect extra bike that will get a plate too. Keep up the good work.
Hell yeah, and thanks man! The one I built before this one was a running 91 I got for $550. Still probably the most fun and best handling bike I’ve owned.
Sounds great😮
My light flickers to
I think it’s needed an upgraded stator for the higher electrical draw but I wasn’t too worried about it.
Great bikes
Good job man! I prefer the stock front light but its rock!
I agree man! This was much cheaper due to being aftermarket. Thanks!
Great video! I would love to see a normal speed version to watch how you work each part. Thanks! KDX200 '96 ride here.
Thanks for the love!
Nice work!
Nice build bro, it turned out awesome!! Keep up the good content 🤘
Thanks man! Can’t wait to get together and ride again! Tafton got a 2020 KX250 😲😲
Nice job!
Uf increíble. Profe. Que estilo
amazing content
Nice job! 1). Where did you get the light and how bright is it? Was it hard to attach? 2) Where did you get the fork boots or are those stock?
The light I got off amazon, it wasn’t very bright so I bought some LED bulbs with it. The headlight was only $19.99 and the bulbs were $12.99 for two. The fork covers I also found on amazon and I bought the longer style. They were a little pricey but they’ll last forever at $26.95.
What is the torque for the triple tree clamps? Thanks
Where did you get the light housing for the front plate? Nice build. Just picked up a 01' 220, any tips for rebuilding?
I actually got that one off amazon. I was skeptical about how it would turn out but it ended up looking great. I did update the bulb to an LED because the bulb that came with it was not bright enough. The tips I would give is find a manual and follow it. If you come up with any questions, google your exact questions because chances are it's been asked before! Good luck!
I have an 04 and can't find graphics online. Where did you get yours and what kind are they? Bike looks great
Thanks! I was able to find some on eBay luckily. I believe I had to piece some of it together. You may check rockymountainatvmc.com , I have good luck there too!
Shoooww muito bom, parabéns
Gracias mi amigo
Hey what head light/ fairing did you put on this
JFG RACING Black Universal... www.amazon.com/dp/B0768PC9G2?ref=ppx_pop_mob_ap_share
That’s the headlight then I ordered some LED bulbs for brightness!
Awesome thank you I just got the same bike last week so starting to go through everything
What did u use to clean pipe
Just some cheap aluminum polisher. If I could go back I’d probably try some other things but with some elbow grease it did a pretty good job.
What do you spray on the surface for the decals?
First I clean them with something that will evaporate easily that contains alcohol. Then I spray just a slight amount of soapy water and it makes it easier to move around and get the air bubbles out and when it dries it will still stick. Then I spray SC1 on it to make it shine and less susceptible to collecting mud.
what kind of seat is that ?
I believe it is the stock seat. It does have an aftermarket seat cover though. I think it was an Attack seat cover.
Trail au enduro les kdx 200
Nice kdx 👍. Check out my abandoned Kawasaki KDX barn find!
Thanks man and I will!
Under 250 my ash. Lol 400$ just in a header and exhaust
Both works expansion chamber and silencer came on the bike when I bought it. I have no reason to lie on the cost lol
@doublewvideos3474 oh so lucky. I just bought a 2001 kdx 220r. It's all stock. I have to change the piston to a weisco. Suprised the original lasted so well. Was takin real good care of by this old man. And I'm replacing the stock exhaust and header,. Was going to change out the pwk33 carb to a 35. But was told it's not needed, if im just trails riding. So I'll keep that. Otherwise not a bad bike.
@travisl5125 thats awesome! To be honest, there’s usually less worry when you get a complete stock bike. Either way they’re great bikes. The KDX 200 was my favorite trail bike so far but the parts were way too hard to find. The 220 has more power and easier to find parts.
On the carb, I’d say stock is fine, just get it jetted right and she will have plenty of power. Keep an eye out on marketplace and eBay for exhaust, can usually get a good deal.