I can't believe this is a free video series. Thank you! I am taking a Solidworks class this fall, and I'm trying to get my feet under me with it. The last design software I used was AutoCad 2004LT!
This is much needed, there are a lot of "tutorials" out there with just some music and the person powering through a project without explaining anything. And it is recent too. Just the best, thank you.
best beginner video ever.... And for new engineers, remember tolerances must be as large as possible,, roundings and chamfers cost about 100 dollars per piece when the workpiece has to be turned / milled, make the workpiece so simple,, it is a huge mistake to think you are skilled because the workpiece is nicely on the screen REMEMBER THAT and set measurements so that all measurements can be read on the drawing, then you are skilled and the people who will produce the item will say skilled man
WOW! I've used Sketchup for many years, I am an infrequent user so I find I am always having to relearn skills. This video has convinced me to add Solidworks to my skill set as I wade into 3d printing Great presentation! Thank you!
Hi! I'm back! You helped me greatly learning solidworks for my thesis and I had great results. Now I have to study solidworks again for an interview as I forgot lots of it! I was especially looking for your videos because you are amazing at explaining everything!
Hi! I just stumbled across your series while trying to get more in depth with solidworks. I was hoping you could explain your series progression. Should I watch E1 that was released recently for the 2023 version then progress to the final exam review video released for the 2020 version? Or will you be re-recording the series for the 2023 version? Thank you!
Just FYI about the Real View. I have a 3060 GeForce RTX which is a gaming card and not a professional and Real View works just fine without going through any hoops or settings.
While i was following tutorial, when i press sketch the view don't go automatically to front view and when i press extrude view doesn't update back to isometric???
Extremely confusing on sketching, French could have come up a lot easier way to create sketch, I am a student for over 2 months and I still cant figure out how to sketch this damn software, they made it very difficult to sketch even tho it make sense. I am exhausted
Hello Preston, thank you for the kind words. This is a college course, not intended for hobbyists. Here is a 10 minute version for attention deficit users. ruclips.net/video/VpcXZE2mCb8/видео.html&pp=ygUTZTEgc29saWR3b3JrcyBzbWFzaA%3D%3D
I can't believe this is a free video series. Thank you! I am taking a Solidworks class this fall, and I'm trying to get my feet under me with it. The last design software I used was AutoCad 2004LT!
Chris you are a great SolidWorks teacher. Not too fast, not too slow and just the right amount of detail.
Just wanted to say that I have gotten Solidworks Make for myself and this tutorial has helped explain everything great for a beginner.
This is much needed, there are a lot of "tutorials" out there with just some music and the person powering through a project without explaining anything. And it is recent too. Just the best, thank you.
best beginner video ever.... And for new engineers, remember tolerances must be as large as possible,, roundings and chamfers cost about 100 dollars per piece when the workpiece has to be turned / milled, make the workpiece so simple,, it is a huge mistake to think you are skilled because the workpiece is nicely on the screen REMEMBER THAT and set measurements so that all measurements can be read on the drawing, then you are skilled and the people who will produce the item will say skilled man
WOW! I've used Sketchup for many years, I am an infrequent user so I find I am always having to relearn skills. This video has convinced me to add Solidworks to my skill set as I wade into 3d printing Great presentation! Thank you!
Hi! I'm back! You helped me greatly learning solidworks for my thesis and I had great results. Now I have to study solidworks again for an interview as I forgot lots of it! I was especially looking for your videos because you are amazing at explaining everything!
Great Video!! I am very impressed by your teaching! I can't wait to continue with the rest of your videos!
What an absolute legend!
cool, I love your lesson, just finished E1. FELL great.
Hey King, you just dropped this: 👑
Completed the entire basics course from the 2020 video!
Moving on to the advanced ones! You're a lifesaver!
you are a real hero. Thanks
Great stuff, Chris. Well executed teaching.
this is the best instruction / teaching I have found. Thank you !! :)
Thanks for the excellent training video.
Wow all this great info and great teacher, thank you sir.
Very well made sir, you have helped hundreds of people.
I'm very thankful for these videos and the thoughtful effort you put into them. Thanks.
Very good explaining. Thank you Sir.
So nice this lecture sir
Excellent video thanks
Thanks for sharing!
beautiful video
Excellent Video Sir!
You are just amazing 🌹
Thank you very much.
Nice and easy, thanks!!!
Very well sir
Great teacher
Thank you sir!
Thank you so much sir for these videos
Very nice class. Thanks
Thank you! Love your videos!
this is really good thanks
thank you so much
Thank you so much
Hi! I just stumbled across your series while trying to get more in depth with solidworks. I was hoping you could explain your series progression. Should I watch E1 that was released recently for the 2023 version then progress to the final exam review video released for the 2020 version? Or will you be re-recording the series for the 2023 version? Thank you!
Nice sir 😊😊😊
Sir ! Really You Are A Genius, I Don't Think So, How Can You Work On Ceating SolidworksSoftwar Reeally really you are the Best 🧠 🧠 🧠 🧠 🧠 🧠 🧠 🧠 🧠 🧠 🧠 🧠
Just FYI about the Real View. I have a 3060 GeForce RTX which is a gaming card and not a professional and Real View works just fine without going through any hoops or settings.
While i was following tutorial, when i press sketch the view don't go automatically to front view and when i press extrude view doesn't update back to isometric???
can you make a course on 2D 3D animation in solidworks. provide link if you have already made one.
Nice stuff,
Sir, which software is more efficient Solidwork or Creo?
Professional Graphics Cards!
36:20
20:20
I have a gaming laptop from 2018 with a rtx 2060, I do get realview.
I'm using a takeback
Extremely confusing on sketching, French could have come up a lot easier way to create sketch, I am a student for over 2 months and I still cant figure out how to sketch this damn software, they made it very difficult to sketch even tho it make sense. I am exhausted
Hello Araimages, parametric sketches in any system may be challenging to some. SolidWorks is a French company - Dassault Systèmes.
you are so damn long winded, I'm now wondering if I'm going to learn shit this century
Hello Preston, thank you for the kind words. This is a college course, not intended for hobbyists. Here is a 10 minute version for attention deficit users. ruclips.net/video/VpcXZE2mCb8/видео.html&pp=ygUTZTEgc29saWR3b3JrcyBzbWFzaA%3D%3D