I'm from Australia, had no idea who Fred Dibnah was so I you tubed him and spent all day Sunday watching Fred Dibnah documentarys amazing fellow, really enjoyed it.
I grew up watching Fred's documentaries. A few months after he died the history channel did a weekend of 24hr back to back repeats of all his documenties and history programmes. I spent all weekend lying on the couch and must have seen them all at least twice; time well spent!
So glad a found this page I’m 33 years old and bricky to trade got diagnosed with ppms 4 years ago and in a wheelchair now I don’t half miss it loving all the videos mate keep up the good work 👍👍
Wow the legend Fred ... ahh mate what a brilliant job to be doing . He put chimneys exactly where they should fall. True ENGLISHMEN WITH BRAINS JUST LIKE YOU AND YOUR FATHER. Nicky the brickie
The brickwork on my 1960s house is pretty bad, as is the whole estate. i stopped using the front door as the front of the house is the worst area and it was worrying me every time i looked at it. however its no where near as bad as this house! so even if im not able to fix it myself some one with the right skills will be able to. im pretty practical so going to have a few practice runs on the garden wall to see how i get on. i suffer with bad anxiety and daft as it might seem to some this video has eased a whole lot of worry for me. ive watched loads of your vids now so cheers for all the tips.
What’s everyone’s thoughts on getting an apprenticeship into bricklaying at 22? I’ve been a brickies labourer for a few years now but wanting to move up. Am I too late?
hi stu. get a refina bucket and a paddle whisk. i never leave home without it on jobs like this. oh and i knew fred personally. he gave me a rollocking or two when i was a kid. keep up the good work lads
A very useful video . Some tradesmen may not tackle such a job as its too small , however its something that its all too common on old houses due to wear and tear and abuse
Fine Restoration job would never know that you had been .great match on the brick .could thomson waterseal the whole wall to protect from further damage . Just my opinion great work as usual .not many would take that on .pull their nose at it .👍
Hi stu.love watching g.your videos I wonder if you can help I am building 2 pillars for a gate the height is 85cm the width 35cm it is a brick and half pillar struggling to work out howuch sand,cement, aggregate needed many thanks
Hello again Stuart Fred dibnah legend 🙌 You would definitely be my house builder contractor Stuart As I know that you would be a highly qualified builder What a legend 🙌
Great video, great job, I have just few questions. This appears to be older house construction hence my pondering about mortar. What kind of have u used sand & lime or sand and cement? Would you recommend sand cement over send and lime in old constructions? Have u used reclaimed bricks or new ones? Which bricks would u use in old Victorian/Edwardian buildings if u haven’t got reclaimed ones? Thanks. Subscribed!
The bricks are failing because it's cement mortar and the water is going into the brick rather than the mortar where it is able to pass through and evaporate back into the atmosphere. All the cracks in the mortar are letting water into the bricks where they'll absorb it and then it freezes the fronts off in the winter...any excess will also be going into the walls and cause excess moisture to appear as damp. As long as there's cement on that wall it's always going to leak - if you look with a x10 lens then you will see tiny parts around the mortar where water ingress can occur. By all means not bashing your work, I enjoy seeing it - but putting cement mortar on that wall is the worst thing you could possible do - what looks original is definitely not, its through years and years of cement repairs failing and repeating the same process.
cheers arran, i thioght to do a weaker mix as the rule never make a mix stronger than the material but i wil add lime to the next mix, any preference on ix ratio? thanks
@@Stucrompton1 thanks for replying - yeah absolutely agree in regards to softer mortar. The ratio would be 2.5-sand to 1- NHL 2 (natural hydraulic lime - NHL 3.5 would be ok if you have that). Wet the bricks up first as it'll stick in better. Leave it for a day/afternoon depending on the weather and then push it into the bricks and come back an hour later and then you should be able to gently rub it up with a small wire brush to open the pores and expose some aggregate to finish. NHL has a chemical set so aftercare is relatively easy once the initial set has formed. Hope this helps.
That man was truly a national treasure to a lot of people, not just in the Bolton / Manny area. I really liked how he demolished chimneys by chiselling out half the brickwork at the bottoms and wedging scrap timber and rubble and then burning the whole lot. Was quite satisfying to see that done in such a unique way.
Привет, я немного говорю по-русски (моя жена русская). Я плохо читаю, поэтому я все еще не очень хорошо понимаю ваш вопрос. Итак, вы спрашиваете, используют ли они глину или цемент? ну цемент конечно. Конечно, это все гугл переводчик.
Dibnah was the "MAN!" When you are filling in the joints, how come you don't use a mortar bag? Seems easier than using a small trowel to smash the mortar into the joints. I enjoy the vids.
I'm from Australia, had no idea who Fred Dibnah was so I you tubed him and spent all day Sunday watching Fred Dibnah documentarys amazing fellow, really enjoyed it.
Hes a legend mate
I grew up watching Fred's documentaries. A few months after he died the history channel did a weekend of 24hr back to back repeats of all his documenties and history programmes. I spent all weekend lying on the couch and must have seen them all at least twice; time well spent!
Nice one boys, what a guy Fred was. RIP Mr Dibnah 🙏
So glad a found this page I’m 33 years old and bricky to trade got diagnosed with ppms 4 years ago and in a wheelchair now I don’t half miss it loving all the videos mate keep up the good work 👍👍
Fred dibnah had balls of steel !!!
Good work lads
Great work mate. Love your videos and banter with KC and Jang always makes me smile. Keep up the great work.
important to have fun at work. helps to get up in the morning
I chuffing love your videos mate! Inspired me to get rid of our old toilet window and block it off. Your tips are brilliant!
Lovely job! For the ultimate tribute, get yourselves taking down a huge chimney, just like Fred did 😂👍
Enjoyable watch that lads loved it. Them bricks were toast. Definitely needed fixing. Grate match too. 👍👍👍👍Top job 👌
Lovely intro stu new season of peaky blinders looking good 😂
Hello,I‘m also a bricklayer and your craft is really Great.
Best wishes from Germany
The Dibnah Blinders, love it! Great video Stu, I love where this is going!😁👍👌👷♂️
Wow the legend Fred ... ahh mate what a brilliant job to be doing . He put chimneys exactly where they should fall. True ENGLISHMEN WITH BRAINS JUST LIKE YOU AND YOUR FATHER. Nicky the brickie
The brickwork on my 1960s house is pretty bad, as is the whole estate. i stopped using the front door as the front of the house is the worst area and it was worrying me every time i looked at it. however its no where near as bad as this house! so even if im not able to fix it myself some one with the right skills will be able to. im pretty practical so going to have a few practice runs on the garden wall to see how i get on. i suffer with bad anxiety and daft as it might seem to some this video has eased a whole lot of worry for me. ive watched loads of your vids now so cheers for all the tips.
"We're here to change a few bricks, dad....not take the house down" 😂😂😂
Nice one pull the old fella inta line
Keep the vids going Stu , you are all doing a cracking job!! Well done pal
You guys are absolutely the best I really enjoy your videos and their very educational and informative.
Picasso with a trowel 👍 really enjoy watching your channel stu
You gotta love spending time with your dad. Good deal bud!!!
What great crew Tough job!! Got the Big boss goin. Y’all have too much fun ! Absolute best you could do guys!
Some nice tricky brick replacement there .. Looks good 👍👍👍
“Did ya like tha?” Go on the dibnah boys 👍
What’s everyone’s thoughts on getting an apprenticeship into bricklaying at 22? I’ve been a brickies labourer for a few years now but wanting to move up. Am I too late?
Another fantastic video stu well done to u KC and Jang and I really like it when u said KC DIBNAH and Jang DIBNAH 😁👍🏻😁👍🏻😁👍🏻😁👍🏻😁👍🏻💯💯💯💯💯💯
Nice work Dibnah Blinders. 👍👍
hi stu. get a refina bucket and a paddle whisk. i never leave home without it on jobs like this. oh and i knew fred personally. he gave me a rollocking or two when i was a kid. keep up the good work lads
Top job gents, love the matching hats.
A very useful video . Some tradesmen may not tackle such a job as its too small , however its something that its all too common on old houses due to wear and tear and abuse
He was such a legend
Are you gonna use any lime with your mix?
Fine Restoration job would never know that you had been .great match on the brick .could thomson waterseal the whole wall to protect from further damage . Just my opinion great work as usual .not many would take that on .pull their nose at it .👍
Nice video. I like these kind of repairs. What is the reason that these bricks became loose ?
maestro que buen refacción de ladrillo saludos de Perú
Do you just do it by eye on patch work?and whats the best way to put mortor on the top wen your sliding brick into a wall
great job lads
i'm doing exact same job replacing spalling bricks my problems are extreme suction mortar just turning mushy and dry within minutes.
Wet the bricks well first.
Excellent work 👍
This is what happens when you use sand and cement to repoint buildings built out of lime.
What trowel are you using mate and size ?
Try using a recip saw with a masonry blade for taking brick out. Works well and saves mess 👌
Surely, that wall should be done with lime?
Yes I thought that
Where is he going to pin a line. There is no point
Hi stu.love watching g.your videos I wonder if you can help I am building 2 pillars for a gate the height is 85cm the width 35cm it is a brick and half pillar struggling to work out howuch sand,cement, aggregate needed many thanks
One of those jobs where you know anything will be better than the original.
Which 11" trowel do you recommend: ox or marshalltown? Thanks freak.
They look likeold imperial size bricks.
Nice to see you retain the original bond.
Not sure about Jang's
Hand mixing technique 😁
Nice job guys.
Good video as always! 👍 what's the rough cost of a repair job like that? Have a few spalled bricks on my house need replacing.
Jang is funny great job fella's👍🍺
What was the cause of the brick crumbling? Was it frost-thaw cycle? Or simply brick too underfired?
Bonito trabajo y veo que os divertis con ello
Fred’s a Bit of a hero of mine , Fred would have you putting fly ash in the mix 😀
Finally a rotary hammer!! Good job on that wall lads
nice, my stairs brick has the same snow flake like falling effect, does anyone know what cost it ? thanks
Great video,keep it up!⬛▫️💠
Would you work on one of his chimney scaffolds?
Great job guys, are you near Luton in Bedfordshire?
North west Wigan 😃
what would the cost of job like this be? and how long did it take?
what causes the bricks to go like that?
Always use lime mortar folks, bricks won't spall like that then. Did ya like that
BRAVO !!!
🙌👏👏👏👏👏👏👏👏
Hello again Stuart
Fred dibnah legend 🙌
You would definitely be my house builder contractor Stuart
As I know that you would be a highly qualified builder
What a legend 🙌
What camera do you use stu?
Love it stu good laugh 😂
The dad knows about his craft no doubt about it
Cheers Stu Dibnah .
Anyone know why the bricks get like that. Never seen that before..
Ear protection, yes. I didn’t see eye protection on KC when he was using the bulldog to break out the brick.
Always one
how many bricks can you safely take out without movement?
Great video, great job, I have just few questions. This appears to be older house construction hence my pondering about mortar. What kind of have u used sand & lime or sand and cement? Would you recommend sand cement over send and lime in old constructions? Have u used reclaimed bricks or new ones? Which bricks would u use in old Victorian/Edwardian buildings if u haven’t got reclaimed ones? Thanks. Subscribed!
Cement and sand 1:4 . New bricks are used. If you want to used older bricks so them clean
Nice video...best wishes!
The bricks are failing because it's cement mortar and the water is going into the brick rather than the mortar where it is able to pass through and evaporate back into the atmosphere. All the cracks in the mortar are letting water into the bricks where they'll absorb it and then it freezes the fronts off in the winter...any excess will also be going into the walls and cause excess moisture to appear as damp. As long as there's cement on that wall it's always going to leak - if you look with a x10 lens then you will see tiny parts around the mortar where water ingress can occur.
By all means not bashing your work, I enjoy seeing it - but putting cement mortar on that wall is the worst thing you could possible do - what looks original is definitely not, its through years and years of cement repairs failing and repeating the same process.
cheers arran, i thioght to do a weaker mix as the rule never make a mix stronger than the material but i wil add lime to the next mix, any preference on ix ratio? thanks
@@Stucrompton1 thanks for replying - yeah absolutely agree in regards to softer mortar.
The ratio would be 2.5-sand to 1- NHL 2 (natural hydraulic lime - NHL 3.5 would be ok if you have that).
Wet the bricks up first as it'll stick in better. Leave it for a day/afternoon depending on the weather and then push it into the bricks and come back an hour later and then you should be able to gently rub it up with a small wire brush to open the pores and expose some aggregate to finish. NHL has a chemical set so aftercare is relatively easy once the initial set has formed.
Hope this helps.
Fred Dibnah what a man he was. The certainly don't make them like that anymore.
That man was truly a national treasure to a lot of people, not just in the Bolton / Manny area. I really liked how he demolished chimneys by chiselling out half the brickwork at the bottoms and wedging scrap timber and rubble and then burning the whole lot. Was quite satisfying to see that done in such a unique way.
Weird snow in April. Now in Kuwait air coolers are working
Spot on match i would say
These the best kind of jobs to get.
How far do you go for work normally Stu?
Full team on job 👍
Jermaine from Chicago IL ask how much does a job like that cost?
Shoulda had bike horn blowing at end.
Tip top lads
Not lbc bricks are they?
Them bricks turned to dust. When do you reckon it was built?
Could be 100 years old mate
How much did you charge for that job
Dobra robota👍
The league of Extra ordinary brickies!
quality job as per
Good jobs guys!)
Love this ❤️
Why is Jangy turning the same bit of compo over , he’s supposed to turn it from one side to the other !😀true master Stu !!
KC Shelby the baddest man in the west.👍👍
Love the cheese cutters
I think those headers are use as bonding ties in the cavity wall. 😲
Здравствуйте, вы ложете на глину или такой цемент?
Привет, я немного говорю по-русски (моя жена русская). Я плохо читаю, поэтому я все еще не очень хорошо понимаю ваш вопрос. Итак, вы спрашиваете, используют ли они глину или цемент? ну цемент конечно. Конечно, это все гугл переводчик.
@@jaksongpg Привет я рад , просто у нас цемент серого цвета а у тебя жёлтый-коричневый.
@@Байкал-щ3э Теперь я вижу - просто цемент другого цвета
Вподобайка 👍👍
nice vid as ever. prob blown in the first place due to cement mortar.
Great job the Dibnah boys 👏👏👏👍🍺🍺🍺🇬🇧
Dibnah was the "MAN!" When you are filling in the joints, how come you don't use a mortar bag? Seems easier than using a small trowel to smash the mortar into the joints. I enjoy the vids.
A bit of "ecky thump" in store for us!
Is there a particular reason the old bricks are crumbling so badly?
dependant on the age of the house......using cement on an old house ruins and damages and the brickwork........lime mortar only should be used
I think when the brick get wet and then freezes it blows out over time. 🙄
Kc hates losing rubble down those cavities 😂
Do all bricks do this or is it a certain type or a certain age?
I think a certain type and the age of the brick. 🙄
Combination of old age and weathering.
Camera is very nyc