Buenas tardes... Por favor sería tan amable de decirme que material es el que utilizaste para hacer la alas... Y cuál es el .arterial de las plumas... Te felicito muy buen trabajo
yes, you can purchase them from my website www.xldecorations.co.uk but if you are outside UK please send me message on Instagram - XLDecorations , as from website you are unable to purchase from other country. Thanks
Its Jiffy foam, to paint you can use spray paint, but make sure its not too toxic, otherwise it will deform or melt it , and please know that after some time paint will come off, if you need them painted few times its ok, but jiffy foam does not absorb paint, so it easily comes off
Use stainless 12mm pex al pex pipe, cable is fine as well but i did add pex pipe after, or can ise stainless steel wire 3mm i put in 2 layers . hope this helps ❤
Bro this is awesome for poor people if you want something like this you can use papper or a white curtain or any color you want the wings cut the shapes out of it harm a book sack and take it’s straps and put on wings then add feather with any glue and you have some cheap wings regards-Dobby the elf -another idea for smaller wings Smaller wings you can take papper about 4 or 10 depending on the size and use strings for this one tape the 4 or more pieces of papper together and then cut the shape out you can also use glue to put them together if pieces fall of play tape or glue them I would recommend tapping them with duck tape then cover them with felt but we are stupid and can’t do that so you have some papper wings:>-horns Use as miny papper rolls and take one draw or cub bord to this and putt all toilet paper in it to use later cut them up/un roll them make them into big circles geting smaller every time the. Glue them into each other may take a long time until it is full so after they are done take some of the toilet papper with white glue and take some of the papper and glue it on there but also pull the paper apart so it is thinner then glue them until it is coating you can use a head Ben or anything to attach it to your head like a hat glue the horns on the hat or head Ben and boom you have horns-tail This is for people with more supplies I will do cheap one after take foam and cut it in a circle then make tail things like cut the shape of the tail out curved or straight I recommend curved at the end but whatever yiu like then cut more of the shape pieces out about 4 then use a kife or scissors and start makeing it rounder then attach the circle to the already curved and then yiu can make the circle fit take a old germ next holder and the clip on it cut a hole to fit the pocket back holder do not de attach the clip from the container or it may not work then I mean fill the hold with glue and foam till you can’t then you can put felt over it color it for details now you have a tail if yiu wnat a demon tail cut a long pice of felt and foam then make it curved at the end as a heart or triangle to it then your pretty much done add a her, next container with glue and put it on your done Next one is for broke people Yiu can use a old shirt with long sleeves and stuff it with socks or stuffing and make it packed to buy a big big shirt to make tail bigger then close the hold add a germ next container with a hook boom your done next is paws Take 2 or 3 pairs of gloves and foam trace the paw you want put glue on the gloves put it on the paws carve it so it is fitting and the way you like it so it fits you can put felt on it on keep the way yiu like it next is a mask Take card bored make big circle about the size of yiu faces make the things cut the eyes out and customize it the way you like it Get trolled this is the end:>>>(this took a long time to type and lots of typeos
moldes/templates you can find in my next tutorial where i make black wings, there is all the same , just jiffy foam you dont need to shape. templates available on my website, you will find all links under that video
moldes/ templates you can find in my next video where i make large black wings, you need completely the same template , just jiffy foam you are not shaping ,just gluing on jiffy foam base and that's it
![Stromae, Pomme - “Ma Meilleure Ennemie” (from Arcane Season 2) [Official Visualizer]](http://i.ytimg.com/vi/1F3OGIFnW1k/mqdefault.jpg)
Holaaaa quiero la parte 2 porfiiii
What yah using to create that:33??
jiffy foam
I'm making these for my daughter in laws cross 😇💔💙
Buenas tardes... Por favor sería tan amable de decirme que material es el que utilizaste para hacer la alas... Y cuál es el .arterial de las plumas... Te felicito muy buen trabajo
Creo que espuma niveladora
¿Qué material usaste para hacer las alas?
How much are one pair of wings cause I'm gonna dress as an angel next Halloween I have angel wings but they are old so howuch.
Please what wire did you use for the base?
These are beautiful, does the hot glue not melt the material?
I don’t think they can…
It depends on how much u put
Como se llama ese material para hacer las plumas ?
Espuma de polietileno
Por favor me puedes decir como se llama el material para hacer las plumas y si también lo. Hay negro
Se llama bajo alfombra o espuma niveladora
What foam is that?
I think it's jiffy foam
@hello fellow therian!! yourlocaltherian_girl
Its polyethylene foam also called packing foam :)
@@-zogekusari-3264thank you 😊 assistant 😂❤
Yes it’s polyethylene foam
May I know what that is that you are using as the Backbone of your wing? Is it electric wire?
Do u think u can make a black version
Hi maam, pwede po malaman ano po name ng ginamit niyo na wings? TIA😊
It’s polyethylene foam, check part 2 in my profile,i have added all information there ❤️👍
What is the name of your channel?
very cool but doesn't the material melt with hot glue?
Nope :)
No it doesn’t,i keep switching on and off my glue gun,use to that already so it’s automatically happening when i make from polyethylene foam 😊
hi very cool wings but what is that at the top of the wings that you use?
Can you tell me pls what material you use in feather pls
What material is this ?
Where did you get your foam
what kind of materials ?
Epe foam
Materials pls.
Es espuma de polietileno
Epe foam/jiffy foam
are base and feather made of same material?
Could you tell me the materials used?
i think felt
Foam
epe foam, as well called jiffy foam :)
What is the name of the material?
polyethylene foam
Could you tell me the materials using your wings?
epe foam
Hola, disculpa podría pintarlas de café? Tengo que hacer un buho😢
You cn,use spray piant,but its not long lasting
I will order
OML- WE HAVE THE SAME GLUE GUN-
Do u have shop cart to buy this product
yes, you can purchase them from my website www.xldecorations.co.uk but if you are outside UK please send me message on Instagram - XLDecorations , as from website you are unable to purchase from other country. Thanks
Amiga con que tipo de pintura se puede pintar ese material
Graffiti paint i used,rubber based paints 👍
Se llama polifoam, se consigue en Barguil o tiendas de materiales textiles y cueros
What kind of foam is that you are using and if I make some What kind of paint do I use to paint them in a color other than white
Its Jiffy foam, to paint you can use spray paint, but make sure its not too toxic, otherwise it will deform or melt it , and please know that after some time paint will come off, if you need them painted few times its ok, but jiffy foam does not absorb paint, so it easily comes off
Can this material be spraypainted? I would like red ones
yes, make sure you use non toxic spray and remember ,spraypaint will come off after some time
Witam.😊 mozesz zdradzić wymiary skrzydeł i piorek? Pozdrawiam.😊
hey, feathers 30cm 20cm and 10cm, frame size you already choose by your self how big you want it 👍
What size do you cut the feathers and how many?
Hello everyone. Someone know what cable is used? Thanks
Use stainless 12mm pex al pex pipe, cable is fine as well but i did add pex pipe after, or can ise stainless steel wire 3mm i put in 2 layers . hope this helps ❤
Donde puedo ver la parte 2? 🥺
check my last video where i make black large wings, there is long full tutorial :)
Bro this is awesome for poor people if you want something like this you can use papper or a white curtain or any color you want the wings cut the shapes out of it harm a book sack and take it’s straps and put on wings then add feather with any glue and you have some cheap wings regards-Dobby the elf -another idea for smaller wings
Smaller wings you can take papper about 4 or 10 depending on the size and use strings for this one tape the 4 or more pieces of papper together and then cut the shape out you can also use glue to put them together if pieces fall of play tape or glue them I would recommend tapping them with duck tape then cover them with felt but we are stupid and can’t do that so you have some papper wings:>-horns
Use as miny papper rolls and take one draw or cub bord to this and putt all toilet paper in it to use later cut them up/un roll them make them into big circles geting smaller every time the. Glue them into each other may take a long time until it is full so after they are done take some of the toilet papper with white glue and take some of the papper and glue it on there but also pull the paper apart so it is thinner then glue them until it is coating you can use a head Ben or anything to attach it to your head like a hat glue the horns on the hat or head Ben and boom you have horns-tail
This is for people with more supplies I will do cheap one after take foam and cut it in a circle then make tail things like cut the shape of the tail out curved or straight I recommend curved at the end but whatever yiu like then cut more of the shape pieces out about 4 then use a kife or scissors and start makeing it rounder then attach the circle to the already curved and then yiu can make the circle fit take a old germ next holder and the clip on it cut a hole to fit the pocket back holder do not de attach the clip from the container or it may not work then I mean fill the hold with glue and foam till you can’t then you can put felt over it color it for details now you have a tail if yiu wnat a demon tail cut a long pice of felt and foam then make it curved at the end as a heart or triangle to it then your pretty much done add a her, next container with glue and put it on your done
Next one is for broke people
Yiu can use a old shirt with long sleeves and stuff it with socks or stuffing and make it packed to buy a big big shirt to make tail bigger then close the hold add a germ next container with a hook boom your done next is paws
Take 2 or 3 pairs of gloves and foam trace the paw you want put glue on the gloves put it on the paws carve it so it is fitting and the way you like it so it fits you can put felt on it on keep the way yiu like it next is a mask
Take card bored make big circle about the size of yiu faces make the things cut the eyes out and customize it the way you like it
Get trolled this is the end:>>>(this took a long time to type and lots of typeos
😁
Send me the link for part 2 please
How much of size and material measurements and how many feathers did you make
Dont count feathers,but its 20 meters of polyethylene foam 2mm thickness
Thank you so much for your help and information. I’m 5”0 tall so I need to make sure I need measurements.
Ile poszlo tej pianki?
Tez takie bede robic,tylko myslalam zeby na podstawe dac dekture.
20meters fomaaa
Can you do gold please
Yes can do
Hola puedes subir molde de las alas
moldes/templates you can find in my next tutorial where i make black wings, there is all the same , just jiffy foam you dont need to shape. templates available on my website, you will find all links under that video
Where is part 2???
So, I’m In Spain and like people used this kinda thing for a bird costume
What are the materials? I'm interested.
Polycell packing foam
Me envia esse molde por favor e a relação de matérias que é usado por favor
K ik i will sound stupid saying this but what material is that?
Epe foam, as well called jiffy foam
Hola buen día disculpe ese material como se llama donde lo consigo??
Polyethylene foam,hardware shops
Como eu consigo o molde de asas de anjo
moldes/ templates you can find in my next video where i make large black wings, you need completely the same template , just jiffy foam you are not shaping ,just gluing on jiffy foam base and that's it
I cant find the full video, in your channel, it all a short video..
there is longer one just in video section,i connected first one with second
Como se llama ese material
Polyethylene foam
Wic material is this?
Polyethylene foam :)
Whatvkind of sheet?
Polyethylene foam
Cuales es el material
Espuma de polietileno
El armazón de las alas de cuánto mm es?
En español por favor...
Qué material es ????
En México se llama lámina de poliestireno
Mr glue began your bestfriend ❤
Cómo se llama esa tela o papel?
polyethylene foam
Pellón
@@xldecorationsbuen día. Para el soporte que utilizo?
Hola me dorian copartir el molde las plumas porfis
A ese papel le llamamos seda
Como se llama esa tela o papel
polyethylene foam
CUAL ES LA MEDIDA DEL ESPESOR DEL MATERIAL?
2mm polyethylene foam
my son want a wings to competition please 🙏
You would like to order one?
Как называется материал?
Подложка
Is that tule
It’s polyethylene foam
Cómo se llama el material
Polyethylene foam (also known as packing foam) :)
@@-zogekusari-3264❤
Part 2?
Check full video on my channel ❤last video will be 👍
Hola como se llama el material de el alas
Como puedo ver todo el video
Where is part 2?
what is the name of the material?
I'm pretty sure it's called jiffy foam
Polyethylene foam also known as packing foam