Simple clap switch control circuit
HTML-код
- Опубликовано: 24 окт 2020
- #electronic #ElectronicProjects #circuit
Simple clap switch control circuit using transistor!
Hello friends, this is a simple clap switch delay circuit. When you clap your hands, the LED will be on, and the LED will automatically turn off after a while. I hope you like this video!
---------------------------------------------------------------------------------------------------------------------------------------------
About Apour Maker Channel:
This channel is all about DIY, How To, Home Made, Great Ideas, simple, funny and entertainment.
---------------------------------------------------------------------------------------------------------------------------------------------
I am going to post different DIY projects frequently so for more upcoming projects don't forget to subscribe to my youtube channel.
Stay tuned for upcoming videos. 
Хобби
Very nice works good, thanks
Wow bro thanks for the video ❣️
Nice project
Nice project brothers
Very Nice Bro
Nice
can you use any lamp?
Sabse best surcuit
❤️❤️🔥🔥😍😍
Thank you can it give benefits like gym instrument????😮
Hi - If I add more led's would I need to change the resistors? Also does is there a specific way that I should connect the led's? Many thanks for such a clear informative video :)
Hi,You can add more LEDs in parallel without changing the resistance value.
But the current value have to be in your check list
@@negatron5888❤
Bro can i add bulb bro plz reply
Duration?
Hi, ¿Can you explain what changes can i do for using this circuit with 5v power?
Can I use 1000uf 25 v capacitor instead of that 100uf 16v
yes this circuit is not resistor bound here the resistor and cap combo determines the time which the circuit stays on lower the resistance longer it stays on similarly for capasitor
ما المسافة التي تستجيب لها الدارة وهل ينطفئ الضوء بشكل تلقائي
Please add motor or other items in it because I want to see that will it work with another items except led
yes u can just give a relay to the output of led and with a seperate power source u can drive a dc motor
or higher load
I is good
is it possible to replace the led with an relay then use a light bulb instead?
Yes you can but relay will be in on
Can i use 1k resistance instead of 220ohm
yes this circuit is not resistor bound here the resistor and cap combo determines the time which the circuit stays on lower the resistance longer it stays on similarly for capasitor
What type of MIC do I need to use?
Also how many watts do the resistors need to be?
electret
its general type mic (capasitive mic)
What else can be used instead of mic
any sensor like light detector
nope u cannot use a light sensor insted of mic to detect sound sry bro i think u took the wrong class in school@@jjojoni223
Bhai yeh graph kaha se milega Jo table pe lga hai niche
Sir can we use it with dcmotor
yes u can just give a relay to the output of led and with a seperate power source u can drive a dc motor
or higher load
Why mine didn't work?
I want to make my child a toy candle using this what type of microphone are you using?
capasitive mic
type is not important u can use any mic provided it has 2 leads
can i use dc motor in place of led?
The Motor will start and stop all the time tho
What's the Capacitor Voltage?
1:01 you can clearly see.
100uf 16v
100uf 16v electrolytic cap
Circuit send me bro
Sir clap light which ka time increase kaise hoga
use higher rated capasitor here 100uf 16v give an on time of 8 sec so if u want to increase the on time say for example 1min u should use a cap with rating 750 uf 16v how did i got this value just simple algebraic equation
100uf 8 sec
x uf 60 sec
cross multiply
6000=8x
x=750uf
16 v can be set as the same
since 750 is not a standard value u might use 1000uf 25v cap which gives a total on time of 1min 20 sec
hope this finds u helpful
Condenser charge rahega jab tak LED on rahegi uske bad LED band ho jayegi fek carcit
I made a clap circuit ..but the problem is the led turns on as soon as I give power supply and turns off but even though I clapped it is never turning on again..can anyone suggest me what had happened 😔
Did the light bulb turned on?
Try different capacitor value
2 possibility u may have reversed between collector and emmiter of bjt or capasitor value is too small can u specify the values used in ur side ?
why my b burn with heat yeettt
Mene bana ke dekha he kuch wark nahi karta he
Instead of 2k can I use 1k
yes only thing is ur on time will be reduce or sensitivity might reduce
It's not work
Fak he video bhaiyo
Fake