dunno if anyone cares but if you're bored like me during the covid times then you can watch all the new movies on instaflixxer. Have been binge watching with my brother for the last weeks xD
Keep in mind, Disk Unkown, Not initialized is not always a serious problem. Do not panic and outright try to initialize it in Disk Management. It can happen to both external and internal drives. If it happens just after a power outage, simply shut down your pc and wait for a minute or two, then restart your pc. If it's still missing from windows explorer and shows as not initialized, while your pc is off, you can try another SATA port or even new sata power and data cables. It just happened to me today and restarting the pc fixed it :D
I also changed my cable and slot thanks to you and it fixed it when nothing else would. Even 2 years later your comment is still helping people out lmao thanks homie
Every time I start it it takes forever and when it finally show the disk it’s says not responding I closed it the first time the second time I waited for more than 30 minutes and it still said not responding so I closed it and now I’m waiting again. I’m going to try something else
My external hdd which i took out of my other laptop wont initialize. Gets detected as hard drive but wont initialize. Says hardware error, however if i insert back to the laptop as primary disk, it works.. Whats wrong? I used win 10
Exactly the same problem here! You guys found out the problem? Mine does not even read the storage capacity. Im using here a usb adapter that works perfectly with other HDD but not with this one BTW AOMEI “Rebuild MBR” option is no longer available in the demo version...
Mine is situation 2, Disk 1 unknown and uninitialized, when I clicked Initialize Disk and select MBR it says Data error (cyclic redundancy check). What should I do?
Yeah i've facing same issue right now, after i initialize the disk, the pop-up show "Virtual Disk Manager. Data error (cyclic redundancy check)." so what i do rightnow, i try to run "Erase" the external hardDisk using software HDDscan (u can easy search it at google). They found so many "bad block" in that Disk rightnow, the progress still run, I don't know that can fix it or not or my external hardisk is damage, i Hope it would fix it. :/
i get error at 3:18 after clicking on ok , the error says "Incorrect function" , unfortunately i cant find any reason or fix to this error. any help appreciated. tnx.
@@unhappystar3816 Then unfortunately your drive might be dead. ( maybe Write Protected but still dead) people usually give up if this occur. after weeks of research I couldn't find anything helpful on internet. mine was Kingstone 256gb M.2 SSD, been using it for 3 month and had no issue or any sign of faulty drive before. after my laptop turned of while I was gaming, drive became inaccessible. no partition could be found or created. ( the error I mentioned ) I hope you find a fix for your self - I gave up
@@josh5254 I´m facing this very same problem and I was reading an instruction by Microsoft which says that if you initialize a HD with data on it you'll lose all your data.
Hey Please help I can see my passport size in disk management but it is unallocated, also initialize disk not available (CRC Error) How can i solve that Kindly help
See a video by Riaz Ahmed on this. Take you HDD out and just clean the contact plates with a cotton bud. This is usually a dirt issue on the contacts. Try that it works and no data is lost al all.
Opening HDD will screw it further.. It should be done in a special area completely free of dust.. Even a microscopic dust particle can scratch the plate beyond repair..
@@AOMEITech Video specifically says "for free" and then shows how to rebuild MBR. But when you try to do that your program needs to be upgraded first to full. IMHO you're just another scamer from Asia
I have another problem. I have to disks from an NAS System, they have no issues. But in the disk managment, they are online and also no issues. But i can not partition them, or do something else. If i go to disk settings and go to volume. The availability of the volume is zero. If that is the problem, how can i fix this?
Salve, io ho un NVMe appena click su gestione disco mi esce inizializza disco ho provato sia MBR che GPT e mi dici "Gestione dischi virtuali funzione non corretta" che devo fare? Grazie
I have an external drive. It is detected and can be seen on aomei. But i cant see on This PC. Aomei shows there is still data on it but i can't access it. Can aomei fix this and how?
My problem is sitution 2 and i followed the steps it even said completed the process yet nothing changed with the hard drive. Still says the same thing.
What should i do next after rebuild mbr and apply? Im already buy pro edition and still not fix my hardisk. Im already try initialized disk and there a popup windows "device is not ready". Please help
@@AOMEITech disk manager : unknown 931.51 gb not initialized (when i initialize disk theres popup "device is not ready" AOEMI : after rebuild mbr : "cingratulation all operation have been completed successfully" But still didnt work. My hardisk still not fixed
Sorry, AOMEI Partition Assistant cannot fix this problem temporarily. The destruction of your disk is not caused by the destruction of MBR, so rebuild MBR is useless.
BEWARE: In ordxer to access MBR repair option you need to upgrade to pro version first. So if that's your only problem (and the reason you clicked this video) don't bother with these scam artists. FU aomei !
@@RacksFPS I used the option on the software called partition recovery wizard. And in a matter of minutes, the record of my partition was found and I was able to mount it. Hope this helped.
Hello, i tried your software and also says I/O error, there is no connection problem my disk is M.2 sata (via convertor to sata) When i use diskpart clean ok, but when i create partition primary also I/O error...
@@mayonnaisepc3340 I have and you are not going to like it :D At first i said goodbye to SSD... then Ubuntu boot allowed me to format it like its not a big deal... once u make boot media via Rufus you go "try ubuntu without install" and then you find DISK icon and click format partition very very easy. I did not try if it can run windows afterwards (that is the bad news) i like ubuntu more now since my lap is weak.
my harddisk is fine as an external (using usb and adapter for daily usage) but after i install it in my pc using power cable from PSU and sata connector, it's not working, even in disk management, please help
unfortunately my hard disk is not initialized unallocated, I don't have any backup. when I click the manage-disk management, popup window open (mbr or gtp), after click ok button then show error. Is my hard disk dead? when i open bios, my disk serial number till now showing. tell me solution please.
how to fix my ExcelStor hard drive external with no drive letter so i need to format it but when i initialize it to MBR the virtual disk manager says access is denied my pc win 10 rog with no other external HDD in my pc but why it doesnt initialized it?
Eyy you i did all but nothings my problem the size dont show in disk management as full T.B my hard is 1T so i said its 55.90 GB when i try to new simple volume it say no space please i need help
im in situation fix 1 when i wnt to initialized disk, there are message comes "the request failed to fatal device hardware error" . what i need to do ?
@@lilym9475 So looks like I had a bad adapter, after inspecting I noticed one of cooper contacts was bad. I ordered a new ide/sata to usb 3.0 on ebay and all 6 of my old hard drives fired right up. They open perfectly, I guess it wasn't enough power to make disk spin
I experience the situation 2 problem (Disk unknown, not initialized, unallocated space), i need to know after performing your steps , will there be loss of data as i have the disk 80% filled with info
Initialize Disk will erase all data on the hard drive. Make sure there is no important data on the hard drive; otherwise, you need to retrieve data back with a data recovery software. www.ubackup.com/
Overnight my Internal HHD became Unknown and can't boot up my PC. Using Diskpart to list volume shows "volume#"-volume 1, "Ltr"-C, "Fs"-Unkno (other volumes are showing NTFS or FAT32), "Type"-Partition, "Size" 451GB & "Status"-Healthy. Is this type of Unknown can be fixed, so I can bootup my Windows 10 again?
I tried FIX 2: Rebuild MBR.......But I was stopped, could not proceed because demo free version can not rebuild MBR-------I was asked to upgrade. I need an idea to proceed please
When i oped my disk management it show that portable disk not initialize. Also show that MBR when i click ok my computer shown that data error check cyclic redundancy. Now what i can do?please give me solution
hello i have a windows server 2008 with the same problem, i try to initialize but i took an answer :"the system doesnt find the file" can you help to resolve this problem
Hi, rebuild MBR would not lead to any data loss. The data on your disk cannot be read, cause you are fixing"disk 1 unknown,not initialized"problem. After rebuild MBR process, what is the state of the disk?
AOMEI hello please help me , it shows unknown and not Initialised ,there is no storage information displayed . When I connected the device is detected in the device and drivers where usually printers like equipment displays . It was an emergency please help . I need to recover and work that hard disk back please help me .
Sir in my hardisk there is no operating software 500 gb is full with data after applying this setup there will be no problem with my data my data will remain safe or not
Disk 1 Unknown Not Initialised I tried to initialise HDD but error message appeared "The request failed due to a fatal device hardware error" Can it be fixed?
Yes, dear, using disk management to initialize the disk will cause data loss, so I suggest you try to rebuild MBR first to see if it can fix your problem if not you have to choose to initialize it.
@@AHARRIRAJD they're on my computer. There best way is to use Linux and a special software to delete a partition. I'll send you my full notes later today.
Hi! Cristy, This error is possibly caused by the connection problem. You can use another cable to connect the external drive. If possible, connect it to another working computer.
![Eminem - Temporary (feat. Skylar Grey) [Official Music Video]](http://i.ytimg.com/vi/ZaK9Wi5ho0o/mqdefault.jpg)
![KAYTRANADA - Witchy (feat. Childish Gambino) [Official Video]](http://i.ytimg.com/vi/jGK3YVmGZ3Y/mqdefault.jpg)
Rebuild MBR fixed my issue and no data loss, thank you for your useful video.
It was internal HDD? I have same issue
video basically says: "your hard drive brokey. get new one"
epic. Thanks for the help! never thought of that one!
Dude it's a 750Gbs ssd my heart can't take a big lose like that
I need it cause cyberpunk 2077 took most of the storage on my pc
@@sterben5995 yeah and it fucked my ssd
dunno if anyone cares but if you're bored like me during the covid times then you can watch all the new movies on instaflixxer. Have been binge watching with my brother for the last weeks xD
@Evan Darwin Yea, I've been watching on InstaFlixxer for since november myself =)
Not working for me, showing i/o error even after rebuilding mbr
That Right Click PC Manage automatically pop up worked like a charm. Thank you
Nice~
Keep in mind, Disk Unkown, Not initialized is not always a serious problem. Do not panic and outright try to initialize it in Disk Management. It can happen to both external and internal drives. If it happens just after a power outage, simply shut down your pc and wait for a minute or two, then restart your pc. If it's still missing from windows explorer and shows as not initialized, while your pc is off, you can try another SATA port or even new sata power and data cables.
It just happened to me today and restarting the pc fixed it :D
This happen to me, except that my cousin accedentally dropped my hard drive. Can you help me
This actually helped me by changing the sata cable and it worked again. Thank you so much for leaving this comment.
I also changed my cable and slot thanks to you and it fixed it when nothing else would. Even 2 years later your comment is still helping people out lmao thanks homie
Faced this issue today.. let's hope this works for me too
i tried to initialize it back, but it said the device is not ready
Every time I start it it takes forever and when it finally show the disk it’s says not responding I closed it the first time the second time I waited for more than 30 minutes and it still said not responding so I closed it and now I’m waiting again. I’m going to try something else
Hey did you get yours to work, I am having a similar problem
My external hdd which i took out of my other laptop wont initialize. Gets detected as hard drive but wont initialize. Says hardware error, however if i insert back to the laptop as primary disk, it works.. Whats wrong? I used win 10
Right there with you.
Exactly the same problem here! You guys found out the problem?
Mine does not even read the storage capacity. Im using here a usb adapter that works perfectly with other HDD but not with this one
BTW AOMEI “Rebuild MBR” option is no longer available in the demo version...
i have the same problem... my external hdd wont initialized and can’t read the storage capacity. have u found out the solution to fix it?
@@gahuls have you found any solution. Same problem and i have all of my family photos in my disk
@@keremberkehanpinar you got the same problem with me. None of this things worked. Have you found any solution?
This tutorial really worked amazing aomei!
Rebuild MBR worked for me. Thanks. This is a lifesaver. Subbed already!
What about the data? Is it lost or is it there?
This one worked will for me, aomei is nice, worth the subscribe.
the vocal so clear
if there is learn english channel with the vocal like this
if i "rebuild MBR", does it wipe out my entire data that I previously saved in my external hardrive?
yeah it will be erased my budget always comes up with a problem and my 300gb anime kept on erasing again and again
Bro, I can't buy a new one we came to RUclips to NOT spend money also I have a whole processor not a laptop I cant just hammer it open.
my ssd is showing " unknown not initialized " and Aomei partition asistant doesn't fix the problem...what to do???
Then you can only initialize it directly in disk management or Partition Assistant.
Unbelievable, this video fixed it.. Simple things like, "Is it definitely plugged in?" XD
Mine is situation 2, Disk 1 unknown and uninitialized, when I clicked Initialize Disk and select MBR it says Data error (cyclic redundancy check). What should I do?
Same with me😑
Yeah i've facing same issue right now, after i initialize the disk, the pop-up show "Virtual Disk Manager. Data error (cyclic redundancy check)." so what i do rightnow, i try to run "Erase" the external hardDisk using software HDDscan (u can easy search it at google). They found so many "bad block" in that Disk rightnow, the progress still run, I don't know that can fix it or not or my external hardisk is damage, i Hope it would fix it. :/
useful tutorial this worked for me, thank you.
i get error at 3:18 after clicking on ok , the error says "Incorrect function" , unfortunately i cant find any reason or fix to this error. any help appreciated. tnx.
same bro
@@unhappystar3816
Then unfortunately your drive might be dead. ( maybe Write Protected but still dead)
people usually give up if this occur.
after weeks of research I couldn't find anything helpful on internet.
mine was Kingstone 256gb M.2 SSD, been using it for 3 month and had no issue or any sign of faulty drive before.
after my laptop turned of while I was gaming, drive became inaccessible.
no partition could be found or created. ( the error I mentioned )
I hope you find a fix for your self - I gave up
@@mute0001 thank you bro i will find problem
what do i do if it says disc 1 unknown not initialized? and it doesnt let me initialize
You can try these methods in this video or click reference link to read reference article.
@@AOMEITech my external drive have alot of files, is it safe to do the initializing disk ?
@@josh5254 I´m facing this very same problem and I was reading an instruction by Microsoft which says that if you initialize a HD with data on it you'll lose all your data.
hi can somebody help me? i tried to initialize my hdd and it says " data error ( cyclic redundancy Check)" what can i do to fix my hdd
Yeah .. now i also face this same problem on my segate 2 TB harddisk ... How can i solve that problem .. how was you solved yours
Same problem on my seagate
Thank you for your help. Simple and easy to follow instructions.
Your voice is so innocent and humble
but what about the data when we intiliaz it?
will it remove or safe?
This worked for me thanks.
i have the latest standard edition there is no rebuild mbr option
Please look for it again carefully you will find it.
Hey
Please help
I can see my passport size in disk management but it is unallocated, also initialize disk not available (CRC Error)
How can i solve that
Kindly help
Does your disk have any important data? If not, you can try to initialize the disk with AOMEI Partition Assistant.
@@AOMEITech yes it does have importance files
what i must do
(sorry for bad english)
@@crystalbroscbs Method 1 can help you back up the entire disk: ruclips.net/video/ekSm7Lkrn2E/видео.html
See a video by Riaz Ahmed on this. Take you HDD out and just clean the contact plates with a cotton bud. This is usually a dirt issue on the contacts. Try that it works and no data is lost al all.
Opening HDD will screw it further.. It should be done in a special area completely free of dust.. Even a microscopic dust particle can scratch the plate beyond repair..
Im not a fan of commenting and subscribing but i gotta do it in here cause you really helped me with this video
ok what do i have to do i did the last step
Omg thanks so much! I was scared i lost all my data, you made it so easy.
Glad to hear!
How did you fix it?
It made it worse. I cant create any partition after i followed the entire process. And i need to buy your product.
Waste of time !!! in final step say buy!!!! It's not recommended to buy.
Standard version is free download, check if you get the right version.
@@AOMEITech Video specifically says "for free" and then shows how to rebuild MBR.
But when you try to do that your program needs to be upgraded first to full.
IMHO you're just another scamer from Asia
Thank you very much, Aomei problem solving
I have another problem. I have to disks from an NAS System, they have no issues. But in the disk managment, they are online and also no issues. But i can not partition them, or do something else. If i go to disk settings and go to volume. The
availability of the volume is zero. If that is the problem, how can i fix this?
Check your disk to see the specific status of it.
Ty this came in clutch cuz I need to downloading something for a test :)
Salve, io ho un NVMe appena click su gestione disco mi esce inizializza disco ho provato sia MBR che GPT e mi dici "Gestione dischi virtuali funzione non corretta" che devo fare? Grazie
usa questo software, aprilo, fai clic destro sul disco scegli ricostruire mbr
www.aomeitech.com/llyy/download/aomei-partition-assistant.html
@@AOMEITech non mi lo fa fare mi dice che devo avere la versione pro 80 euro sono troppi 😞😞
I have an external drive. It is detected and can be seen on aomei. But i cant see on This PC. Aomei shows there is still data on it but i can't access it. Can aomei fix this and how?
My problem is sitution 2 and i followed the steps it even said completed the process yet nothing changed with the hard drive. Still says the same thing.
You may initialize it directly in disk management only, if rebuild mbr can't help.
What should i do next after rebuild mbr and apply? Im already buy pro edition and still not fix my hardisk.
Im already try initialized disk and there a popup windows "device is not ready". Please help
What is the status of your disk in Disk Manager and AOMEI Partition Assistant?
@@AOMEITech disk manager : unknown 931.51 gb not initialized (when i initialize disk theres popup "device is not ready"
AOEMI : after rebuild mbr : "cingratulation all operation have been completed successfully"
But still didnt work. My hardisk still not fixed
Sorry, AOMEI Partition Assistant cannot fix this problem temporarily. The destruction of your disk is not caused by the destruction of MBR, so rebuild MBR is useless.
You fell for AOME1's scam.
BEWARE:
In ordxer to access MBR repair option you need to upgrade to pro version first. So if that's your only problem (and the reason you clicked this video) don't bother with these scam artists.
FU aomei !
They are not scam artists, their software is really good. Can't get everything for free. The info shared was gold, saved my 3tb hdd.
ive got this problem so what the hell can I do pls help me
@@RacksFPS Hey, I believe that issue i had encountered was not the MBR.
@@RacksFPS I used the option on the software called partition recovery wizard. And in a matter of minutes, the record of my partition was found and I was able to mount it. Hope this helped.
My case is 2nd. Please tell me what is meant by *down red arrow* in this case.
Yes but is the data still ok or has it been formatted.
how about the data inside hard drives. it seems this tutorial didnt accomodate the data
Hello, i tried your software and also says I/O error, there is no connection problem my disk is M.2 sata (via convertor to sata)
When i use diskpart clean ok, but when i create partition primary also I/O error...
@@mayonnaisepc3340 I have and you are not going to like it :D At first i said goodbye to SSD...
then Ubuntu boot allowed me to format it like its not a big deal... once u make boot media via Rufus you go "try ubuntu without install" and then you find DISK icon and click format partition very very easy. I did not try if it can run windows afterwards (that is the bad news) i like ubuntu more now since my lap is weak.
My issue is my ssd cannot be initialized because that function is greyed out and I cant even do the initialization process at all.
You can try to repair MBR using the Partition Assistant first.
www.aomeitech.com/llyy/download/aomei-partition-assistant.html
what if "3:01" the "initialize disk" can't be clicked?
Use other methods to finish the fixing job.
@@AOMEITech how?? Pls help
Same. Doesn’t even show me My D drive size -_-.
tks u very much, i have succussed to repair by disconnect and reconnect SATA cable.
my harddisk is fine as an external (using usb and adapter for daily usage) but after i install it in my pc using power cable from PSU and sata connector, it's not working, even in disk management, please help
Hi dear, for your situation the reasons could be various, I suggest you contact AOMEI support team via email to get professional help.
unfortunately my hard disk is not initialized unallocated, I don't have any backup. when I click the manage-disk management, popup window open (mbr or gtp), after click ok button then show error. Is my hard disk dead? when i open bios, my disk serial number till now showing. tell me solution please.
Same here
How to fix my ssd is not showing up at the partition but in device manager its there
how to fix my ExcelStor hard drive external
with no drive letter so i need to format it
but when i initialize it to MBR the virtual disk manager says access is denied
my pc win 10 rog with no other external HDD in my pc but why it doesnt initialized it?
Hi there! For this situation, you are greatly suggested to contact AOMEI support team via email, they can help you solve this.
My hard disk problem is situation. 1
Disk unknown, not initialized, no disk space
Please help me 😟🥺🥺😫🙏🙏🙏
hi sir i'm facing error like Disk 1 unknown not initialized and GB also not sowing
Trying methods under situation 1(00:00:42)
@@AOMEITech is it safe to open the hard drive?
@@bryanzano9597 There is no need to open the HDD, just look for dents or scratches on the surface of the disk.
Yay, "Rebuild MBR" fix worked for me! Thanks!
Did rebuild MBR also wiped your data?
Eyy you i did all but nothings my problem the size dont show in disk management as full T.B my hard is 1T so i said its 55.90 GB when i try to new simple volume it say no space please i need help
im in situation fix 1 when i wnt to initialized disk, there are message comes "the request failed to fatal device hardware error" . what i need to do ?
why is the program so laggy ??
So no matter problem is solved or not, the data sure be gone, right?
No, sometimes it can be fixed by repairing MBR and it will cause the data loss.
hello, i have the same error, but when I try to it says device not ready, it says the same when i try to initialize it. How shoud the jumper be set?
Same issue with my HD,, how you solved the issue??
Steven Reyes same!
Steven Reyes have you solved this already?
@@lilym9475 So looks like I had a bad adapter, after inspecting I noticed one of cooper contacts was bad. I ordered a new ide/sata to usb 3.0 on ebay and all 6 of my old hard drives fired right up. They open perfectly, I guess it wasn't enough power to make disk spin
I experience the situation 2 problem (Disk unknown, not initialized, unallocated space), i need to know after performing your steps , will there be loss of data as i have the disk 80% filled with info
Initialize Disk will erase all data on the hard drive. Make sure there is no important data on the hard drive; otherwise, you need to retrieve data back with a data recovery software.
www.ubackup.com/
Hi My suitation the Hard drive detect and automatically remove..wht we do.
what if you can't initialize a disk? When i try to initialize the option to do so is greyed out and inaccesible.
Please try to rebuild MBR first.
nailed it, it worked! Thank you so much for posting, you deserve my sub!
Overnight my Internal HHD became Unknown and can't boot up my PC. Using Diskpart to list volume shows "volume#"-volume 1, "Ltr"-C, "Fs"-Unkno (other volumes are showing NTFS or FAT32), "Type"-Partition, "Size" 451GB & "Status"-Healthy. Is this type of Unknown can be fixed, so I can bootup my Windows 10 again?
Try the CHKDSK command first to see if it can be fixed.
www.lifewire.com/chkdsk-command-2625838
I am tried to rebuild MBR in final step it is asking to buy software... Can you please help me on this
my disk 1 is only showing 3.86gb of unallocated space even though my hard drive is 2tb
What is the partition type of this disk?
When I try to initialize disk it tells me the device isn't ready
i have got same situation as system tells me the device isn't ready!! :(
@@aaqiblinksable Did you guys figure out a solution? Mine says the request can't be performed because of an I/O device error.
@@Kapybaraaa having the same problem, let me know if you find anything
I tried FIX 2: Rebuild MBR.......But I was stopped, could not proceed because demo free version can not rebuild MBR-------I was asked to upgrade. I need an idea to proceed please
As for the problem, you can contact AOMEI Support Team via email to get help further.
Thank you for the help.
When i oped my disk management it show that portable disk not initialize. Also show that MBR when i click ok my computer shown that data error check cyclic redundancy. Now what i can do?please give me solution
Same here
hello i have a windows server 2008 with the same problem, i try to initialize but i took an answer :"the system doesnt find the file" can you help to resolve this problem
Dear we rarely meet this kind of issue, maybe you can email the AOMEI Tech support team to get further help.
what if there's a pop up after clicking initialize disk. it shows here " Data error (cyclic redundancy check). anyone knows about this?
www.diskpart.com/articles/diskpart-has-encountered-an-error-data-error-8523.html
Did it get solved?
I have a question. If I intialize disk, Will my data be retained?
Yes, it will if you directly initialize it, so I recommend you rebuild the MBR first, if doesn't work then initialize it.
It says I/O device error What should I do?
I just buy new ssd and this problem show up, what exactly happening?
For a new disk, it has to be initialized before starting to use it.
you do not state if MBR or GPT rebuild it would destroy all data on the existing drive. not good
Hi, rebuild MBR would not lead to any data loss. The data on your disk cannot be read, cause you are fixing"disk 1 unknown,not initialized"problem. After rebuild MBR process, what is the state of the disk?
I followed you tutorial now my laptop don't even recognise the hard disk
I cant event initialize
I need help with disk 0 it says unallocated.
I Got The Problem Too
@@rommellopezjr.1497o I fix it. what I did was add a volume
@@gvo6652 I Cant Click New Simple Volume
@@rommellopezjr.1497 What pops up when u right click on disk 0
What if I can't initialized because it does not work it says error could not initialize because off a error in I/O unit
This article could helpwww.diskpart.com/diskpart/diskpart-clean-error-0310.html
doesn't work for me :(
Could you tell me more details? I'll try my best to solve your trouble.
AOMEI hello please help me , it shows unknown and not Initialised ,there is no storage information displayed . When I connected the device is detected in the device and drivers where usually printers like equipment displays . It was an emergency please help . I need to recover and work that hard disk back please help me .
If cannot initialize?? And cannot rebuild MBR on 2 situation??
Sir in my hardisk there is no operating software
500 gb is full with data
after applying this setup there will be no problem with my data
my data will remain safe or not
sir plz reply
Do you mean will your data lost if you initialize the disk?
@@AOMEITech yes
so what if you had rebuild MBR? its still shown as unallocated and i presume data is still lost? lol
Maybe there are bad sectors on the disk, which means it is physically broken.
At step 3, clicking Apply and Proceed, a pop up opens saying this is a simulation, send us money to get a working version of AOMEI.
The "Rebuild MBR" function can be used in the standard version without upgrading, check whether downloaded the right version.
@@AOMEITech liar
I hit initialize and it says incorrect function. How do I fix this?
There are many types of incorrect function errors, What is the complete description of it?
Rebuild mbr succesfully fixed my issue
Disk 1 Unknown Not Initialised
I tried to initialise HDD but error message appeared
"The request failed due to a fatal device hardware error"
Can it be fixed?
ramicollo that’s what I want to find out, I’m so confused
im initializing and its says that device not ready ? any recommendation to solve this problem
It is very likely resulted from a file system errors or bad sectors on the drive, so you need to check if there is a problem with the disk
Please reply if initialize will erase/remove the data/files from the hard drive. 3:02
Yes, dear, using disk management to initialize the disk will cause data loss, so I suggest you try to rebuild MBR first to see if it can fix your problem if not you have to choose to initialize it.
@@AOMEITech thanks for a reply. I will try.
what to do for the problem 1? My external hardisk says disk 1 unknown and not initialized. Plz tell the solution.
You can click on the point in the description that matches your situation to see the solution.
Is it possible to recover data from scratch hard drive ?
yes...u can recover even the crashed hdd/sdd...u can recover all data....
but u need a data recovery software...
@@himeldas3623 doesn't this mean clean format?
@@ima5h984 please use your brain
Hi I purchased your product but guess it was not useful.I still cant initialized my external HDD, it still says unallocated
I get the same thing this product is not useful
if you Initialized the disk will it delete your files i don't what my files to be deleted i'm scared i what them to be kept!
Yes, initialized the disk will delete all your files on this disk, if you don't want to lose any data, you may clone your disk before initialized.
HELLO will doing the last part erase my disk content :(
Same doubt bro..what happened when u have done
@@AHARRIRAJD I got help on a discord server, I'll post you my notes later today.
@@AHARRIRAJD they're on my computer. There best way is to use Linux and a special software to delete a partition. I'll send you my full notes later today.
This video solved my issue, thanks!
Hi! I have the same problem but when I try to initialise it it says something about an i/o device error can you help me please?
Hi! Cristy, This error is possibly caused by the connection problem. You can use another cable to connect the external drive. If possible, connect it to another working computer.
@@AOMEITech Ok thanks I will try
@@AOMEITech when I initialize it says "data error (cyclic redundancy check)
@@st.lopikongiii151 same here
:Failed to format NTFS due to too many bad clusters.
hey nothing worked. plz help the black hardrive is not there
If the solutions are not working, you may need to check if it is physically broken.
didnt work any of those...how?
Hopefully this will work... I really need those files on my external hard drive
thank you very much