Ola Gabriel, it really nice to see someone doing that kind of building especially here in Australia. there are no many videos regarding structural design in Australian Standards. I was planning to start doing videos about Robot and SAP2000, Safe & Etabs but I got really busy. I had lots request from new engineers or student about the typical Australian warehouse design, concrete tiltup panels as perimeter and steel roof structure. it'll be great if you could do this kind of design to help lots of engineers and students here in Australia. Please let me know if you need any book or reference standards and i'll send. Will keep in touch and Thank you.
Hi Ahmad, I agree with you, there's not much content out there for students and engineers. The aim of this channel is to assist students with the challenges they may encounter in the beginning of their careers. I empathize with you, I work full time and try to squeeze in these videos on the weekends. I've got some Portal Frames tutorial lined up. I appreciate your help. Get in touch through my Linkedin and we can organize some content together if you're interested. Thanks.
These are great videos. Thanks Gabriel. We're planning a split-level build (which may end up dual occupancy), and your videos have been a great resource to think over.
Acredito que nao. Leva um pouquinho de tempo para se acostumar com o Robot, mas ele tem muito mais funcionalidades que o cypecad. Obs.: ninguem usa Cype aqui na Australia.
o Robot você precisa REALMENTE entender cada passo da engenharia, cada configuração que voce ta fazendo pro concreto, pro aço, pra tudo .... o Cype ja é mais didatico, você precisa entender sim de estruturas, mas voce consegue apenas "PILOTAR" o software e ter uma estrutura
Ola Gabriel que legal seu canal sobre engenharia estrutural na Austrália. Poderia dizer quais os softwares de cálculo que vc utiliza? TQS, CYPECAD OU OUTROS
Gabriel poderia fazer um vídeo correlacionando um projeto estrutural em CA do Brasil e da Austrália? Seria interessante ver as diferenças entre as documentações.
Hi mate.. Robot doesn't support AS3600. I usually use it to get moments and internal forces and design concrete structures with spreadsheets or with another software. However, if you play a bit with the settings you may be able to get something very similar to AS3600.
Ola Gabriel, it really nice to see someone doing that kind of building especially here in Australia. there are no many videos regarding structural design in Australian Standards.
I was planning to start doing videos about Robot and SAP2000, Safe & Etabs but I got really busy.
I had lots request from new engineers or student about the typical Australian warehouse design, concrete tiltup panels as perimeter and steel roof structure.
it'll be great if you could do this kind of design to help lots of engineers and students here in Australia.
Please let me know if you need any book or reference standards and i'll send.
Will keep in touch and Thank you.
Hi Ahmad, I agree with you, there's not much content out there for students and engineers. The aim of this channel is to assist students with the challenges they may encounter in the beginning of their careers. I empathize with you, I work full time and try to squeeze in these videos on the weekends. I've got some Portal Frames tutorial lined up. I appreciate your help. Get in touch through my Linkedin and we can organize some content together if you're interested. Thanks.
These are great videos. Thanks Gabriel. We're planning a split-level build (which may end up dual occupancy), and your videos have been a great resource to think over.
Thanks :) Glad it's been helpful.
Can make one for concrete structures.. Like small house.. That will be so helpful..
You energy make me happy
Thank you
Thanks buddy. I'm glad you're getting something out of the video.
I'm planning to go over a reinforced concrete house that I designed recently.
@@bengthebrazilianengineerinAus wow!!
that will be useful...thank you.
Thank you sooooooo much
Good Job
Thanks. Glad you liked it.
Excelente vídeo! Eu não conhecia o Robot. Vc acha que em termos de praticidade e didática ele se aproxima do CYPECAD?
Acredito que nao. Leva um pouquinho de tempo para se acostumar com o Robot, mas ele tem muito mais funcionalidades que o cypecad. Obs.: ninguem usa Cype aqui na Australia.
o Robot você precisa REALMENTE entender cada passo da engenharia, cada configuração que voce ta fazendo pro concreto, pro aço, pra tudo .... o Cype ja é mais didatico, você precisa entender sim de estruturas, mas voce consegue apenas "PILOTAR" o software e ter uma estrutura
Ola Gabriel que legal seu canal sobre engenharia estrutural na Austrália. Poderia dizer quais os softwares de cálculo que vc utiliza? TQS, CYPECAD OU OUTROS
Nao utilizam TQS ou Cype aqui. Os mais usados sao Spacegass, Microstran, Strand7, RCB (Inducta), Robot.
Gabriel poderia fazer um vídeo correlacionando um projeto estrutural em CA do Brasil e da Austrália? Seria interessante ver as diferenças entre as documentações.
@@regianecunha5160 eu posso mostrar um projeto em concreto armado aqui da Australia. Do Brasil nao tenho nenhum aqui. Ja estou na Aus um bom tempo.
Muito brigado homem!.
Sucesso !
please continue wit next tutorials
Will do. :)
AWESOME, I WILL SHOW MY FRIEND YOUR CHANNEL. DO YOU KNOW HOW TO APPLY AS3600 INTO CONCRETE DESIGN, SEEM LIKE RSAP DOESNT HAVE THAT FUNCTION
Hi mate.. Robot doesn't support AS3600. I usually use it to get moments and internal forces and design concrete structures with spreadsheets or with another software. However, if you play a bit with the settings you may be able to get something very similar to AS3600.
@@bengthebrazilianengineerinAus Tks mate. You dont know how many people wait someone like you to show up. Keep your great work :)
@@nhanvohoang8935 Appreciate it. Thanks
Hi Gabriel, is this a paid software or can you get a cracked copy of it as well?
Hi mate. It's a paid software. You can download the student version if you're a student.
How can i be like you sir
hahaha just be yourself and you will do great. Thanks :)