After a while the first capacitor will blow up due to operating at wrong polarity. You could fix this by using other type of capacitors or replacing the first one with a cap that doesn't have polarity.
None of the capacitors are reverse polarised. For example, C1 is charged via D1 on positive half cycles. On negative half cycles D1 prevents C1 from discharging via the power supply but as the negative terminal of C2 is taken negative, C2 charges from the accumulated charge in C1 via D2. This repeats all the way up the ladder.
@@user-ug5wt7yd5qthats not true, the voltage in each capacitor is less than 50V. He is measuring the voltage between a common node and one node of the capacitors, so when is far away the voltage of each capacitor are added
For those questioning the rating of capacitor. Each stage is within limit. But you are measuring reference voltage in accumulative stages. So if you measure each stage you will see only 36 volts minus parasitic loss.
You have caps rated for 50v, but even after the first cap - voltage is 60v plus (upto 240v). Why wont the caps blow, especially putting 240v through a 50v rated capacitor? I read it was because the caps are in series - so 3 caps (90v) would be getting a 30v each??
They are électrolytique. Meaning they have a polarité ac goes from +to- this will reverse the voltage on the capacitors.But the circuit works the capacitors just arent the right kind for the job.
@@teovanlung-oaif you use transistor diode coil than the circuit will work properly.....I try this at home this work's but not useful this can only show voltage in multimeter if you whon to make best voltage booster you can use diose,coil,transistor it will be work 100% !
![mgk - I Think I’m OKAY (with YUNGBLUD) (Sad Version) [Official Music Video]](http://i.ytimg.com/vi/7AC1uqQLIg4/mqdefault.jpg)
After a while the first capacitor will blow up due to operating at wrong polarity. You could fix this by using other type of capacitors or replacing the first one with a cap that doesn't have polarity.
This is a perfect and all time famous circuit, this circuit built-in in all electronic insect killer.
None of the capacitors are reverse polarised. For example, C1 is charged via D1 on positive half cycles. On negative half cycles D1 prevents C1 from discharging via the power supply but as the negative terminal of C2 is taken negative, C2 charges from the accumulated charge in C1 via D2. This repeats all the way up the ladder.
@@TARIQLABthat's what I want to ask why your capacitors don't explode because their voltage is exceeded
@@TARIQLAB But they use ceramic capacitors, not electrolitic.
@@user-ug5wt7yd5qthats not true, the voltage in each capacitor is less than 50V. He is measuring the voltage between a common node and one node of the capacitors, so when is far away the voltage of each capacitor are added
For those questioning the rating of capacitor. Each stage is within limit. But you are measuring reference voltage in accumulative stages. So if you measure each stage you will see only 36 volts minus parasitic loss.
Use mains voltage capacitors to get a good output straight from mains. Some uses take very little current at 4000V or more .
Простой умножитель.. только конденсаторы надо ставить на одну четверть больше напряжения выдаваемого каждым каскадом. А то сможет быть взрыв
That is what is needed on a self charging bicycle or vehicle perhaps; .
Pretty much a dc transformer that's cool
I'm gonna stick to using a boost converter
i had a thought imagine using both .
caps rated at 50v, how are they not blowing up!?
Because in series, total Voltage divided on each capacitor 30v
each cap only has 30v between it and the previous one, it goes in steps
Thank u ji🎉
markx generator ?
Super TARIQ
and current reducer.
S'il vous quel générateur avez vous utilisez?
You have caps rated for 50v, but even after the first cap - voltage is 60v plus (upto 240v). Why wont the caps blow, especially putting 240v through a 50v rated capacitor? I read it was because the caps are in series - so 3 caps (90v) would be getting a 30v each??
Yes all capacitors hold 30v , so there is no issue, u can see this arrangement in almost all types of insects killer
HOW?!
Super SUPER
Ac with electrolitic caps... Not a great idea.
30v on 50v capacitor, what is the issue ?
They are électrolytique. Meaning they have a polarité ac goes from +to- this will reverse the voltage on the capacitors.But the circuit works the capacitors just arent the right kind for the job.
@@hermajestyfloreit would have been an issue if they didnt use the diodes
I think you should use non-polarized capacitors
Polarity remains same on all capacitors so no need to use non polar capacitors
I don't have 33uf, what other uf capacitor can I use instead of 33 if capacitor? I mean alternative for 33uf capacitor?
47uf, 100uf
@@TARIQLAB Thanks
Use ceramic caps though, not electrolitic
@@hermajestyflore okay
Should have that 50v capacitor exploded once it goes over 50v and how does that capacitor still works at like 240v
Every capacitor has around 30v on it , all capacitors are on series, collective volts 230
Not on loads of amps loads use so much amp from loading device on.
@@TARIQLAB yeah but they have polarity the correct capacitor for this application would ceramic or film... Please correct me if i am wrong.
👍👍😊
Ok !!!!, super proiect.
TY
If you increase uf will you get high voltage ? Why 33uf ?
Not voltage only charge
This schematic is also known as "Jacob's Ladder".
No, thats different, this is a marx generator
Actually, it's a half-wave Cockcroft-Walton voltage multiplier
@@bogdan_n oh really, sorry it is a Cockroft-Walton multiplier
Can i use 1,5v AA battery DC to output 4-5v DC?
Which capacitor Should I use?
This circuit only for ac input to dc
how about 24v with 10 amps current?
AMPS KITNA HOGA YA KITNA LOD DEGA DC YA AC VOLTEG HONGE VO nahi bola. Yese to DC hi honge. Yesa lagta he.
I have 1.5 volt how can i make it around 5-6 volt.
If ac then same way , if dc u need booster
পচুরভালো😢
Please reply. If input 4v. Which capasitor use????
16v sufficient
@@TARIQLABwhat about Amperes? It's still fixed or disappeared?
Amp is massively decreased
@@maksymkondratiewwatt’s=amps*voltage if voltage goes up amps go down.
How much ampere is the current??
Very low. a slight load would drop the voltage significantly
depends on your transformer,
@@Iceice69420 no. Depends on the capacitance of the capacitor
can i use 1000μf capacitors?
Too much
What about 5vlt to any...?
Will boost same way
Ac in hai too output volt AC hai ya DC volt hai???
DC
@@TARIQLAB sir dc 12 v convert into ac 220 volt per bhi koi vdo banayen
Ya this work's 100% but this is not use full you did not use transistor
You're welcome ♥️
Why would you need a transistor though?
@@teovanlung-oaif you use transistor diode coil than the circuit will work properly.....I try this at home this work's but not useful this can only show voltage in multimeter if you whon to make best voltage booster you can use diose,coil,transistor it will be work 100% !
@@teovanlung-oathis is soo easy to make at home !?
228v DC??? That's dodgy!!!
But anyways awesome circuit!!
Can I use 25v 4700uf capacitor
25v for 12v ac input ok, but 4700uf too much, use less than 1000uf