The black wire on the switch is the center position connect that to the positive power. The Green wire on the switch is the left side yellow signal wire. Red wire on the switch goes to yellow signal for right turn.
TechTronic9000 can you make a tutorial? Like the cable from turn signal if i add another turn signal do i need to put dc dc converter? The cables are from controller. The cable of my turn signal are thin than on this you have on video maybe its also 12V?
TechTronic9000 what kind of brackets? I have electric scooter 48V i attach some turn signal lights with dc converter but the relay on scooter stop flashing, now i need this lights with flashing or relay
That is very simple, all negative wires from all the lights go to the battery negative, while the positive needs a 3 way position switch and and another extra one for DRL + blinking lights.
No, they jut need power from a 12V source and they will work by themselfs with no need for a relay or resistor. You will just need a switch to turn them on/off.
TechTronic9000 i bought some of this that doesnt flash so i put relay 3 pin on e scooter and worka fine attach to the battery separately with dc converter im happy i did it👍🏻
It's a 3S LiPo, you can get one from here bit.ly/39kURME the bigger capacity the bigger the runtime, you need a very good charger for LiPo, it might be better to get a 3S LiIon 18650 battery.
Various Light KITs: bit.ly/3QMYOhc
Different Switch models: bit.ly/3w8byXZ
A video showing the function of the switch with the lights would be very helpful
The black wire on the switch is the center position connect that to the positive power. The Green wire on the switch is the left side yellow signal wire. Red wire on the switch goes to yellow signal for right turn.
this is very intersting.
My scooter has a 2a usb port (for accessories, etc ) would that be enough to power these?
These are made to work on 12V, USB has only 5V, you need a 3 cell Li-Ion battery or a Dc-Dc converter and power them from the scooter battery.
@@TechTronic9000 Thank you for that. it's still an interesting idea, so I'll see if i can tap into the scooter's battery
TechTronic9000 can you make a tutorial? Like the cable from turn signal if i add another turn signal do i need to put dc dc converter? The cables are from controller. The cable of my turn signal are thin than on this you have on video maybe its also 12V?
look good! How do you attach them to an electric scooter?
Depends on the scooter, you need to make some brackets
TechTronic9000 what kind of brackets? I have electric scooter 48V i attach some turn signal lights with dc converter but the relay on scooter stop flashing, now i need this lights with flashing or relay
Hey man, this is very helpful! Thanks! But what if I want turn signal lights with beeping sound, what shall I do?
you need a beeper
Or a parrot!
Hi there I have signal light but coming with red and black wires only when I connect this to black and yellow keeps blinking what I should do any help
Hi there thks for the video...but how do we connect all to the turning switch can you show or tell us please
That is very simple, all negative wires from all the lights go to the battery negative, while the positive needs a 3 way position switch and and another extra one for DRL + blinking lights.
@@TechTronic9000 ok thks gona trie 😉👍
I wonder if those are neopixel style rgb leds, or just dual color.
I think they are just dual color LED
what is the name of that coloro green?
Do you have any links for installation?
No because i no longer have the scooter I was intending to install these on it.
Any chance they got these lights on Amazon?
Yes, these ones are similar amzn.to/3BwX6dx
Where can i buy that battery ?
Any 3S battery will do, the bigger the capacity the more runtime will have, you can get a good one from here bit.ly/3c63YUs
Where to buy ?
Mine was from here, where you can find a lot of various model KITs: bit.ly/3QMYOhc
Does it need relay or resistor?
No, they jut need power from a 12V source and they will work by themselfs with no need for a relay or resistor. You will just need a switch to turn them on/off.
TechTronic9000 i bought some of this that doesnt flash so i put relay 3 pin on e scooter and worka fine attach to the battery separately with dc converter im happy i did it👍🏻
Link for battery if possible or similar ones
It's a 3S LiPo, you can get one from here bit.ly/39kURME the bigger capacity the bigger the runtime, you need a very good charger for LiPo, it might be better to get a 3S LiIon 18650 battery.
@@TechTronic9000 thanks appreciated I have a 3200w scooter, I'm a bit confused will that battery control all 4 lights or will I need 4 lipo batteries
You can run all the lights from one single battery as led turn signals use very low power.
@@TechTronic9000 wow okay Thanks
How do you hook it up with the switch?
Simple, just supply power to it.
How to connect the switch control to the light?
@@gadgetisrael810 yes
your links are dead ok hehe
Thanks, I have updated them.
Well that was helpful...no kind of direction or advice for install...🤦🏾♂️
This is a short video just about the KIT, it's not an installation one.