DIY Himiko Toga Blood-Sucking Machine
HTML-код
- Опубликовано: 13 сен 2024
- How I made the rest of Togas cosplay: • DIY Himiko Toga Cosplay
Materials:
-6 Syringes:
www.amazon.com...
-Great stuff:
www.amazon.com...
-Cardboard
-Styrofoam
-air dry clay ( white):
www.amazon.com...
- white acrylic paint
UV Resistant clear coating
- craft foam
- spray paint in hunter green and metallic aluminium
- Vinyl tubing ( something similar to this www.osh.com/Osh... )
- 2 spray bottles from the dollar store
-one 1 inch black elastic band
- 1 yard of black fleece
- 4 screws ( if you plan on screwing the syringes to the mask)
- hot glue
Music by LakeyInspiredMusic / @lakeyinspired
Etsy: www.etsy.com/s...
You must not have nerves lol, you touched that hot glue like it was nothing
hahaha yah kinda got burned by the hot glue gun a lot so now it doesn't really bother me anymore , plus the video was sped up so I didn't place my fingers right away onto the hot glue.
hot glue doesn’t really burn lmao i’ve gotten it near me eye and it didn’t hurt. i guess i just got used to it.
Saranade LOL RIGHT
Hands of a crafter
Myles Is Not On Fire I accidentally got it on my tongue
Honestly you are the best cosplayer I have ever seen.
aww thank you so much
You could try using Velcro for the extra little jugs, you can buy the sticky back kind and it will probably stick on to the jugs well and hold them together quite well! Also great video I want to try and cosplay toga so this will be really helpful!
thanks you I'll try it out
also thanks hope you have fun making your cosplay
Thanks I’ll try it out
my dad always talks to me about perseverance these videos are always inspiring
aww thanks
*SHUCC SHUCC*
snibbles likes mocha Succokichi shshshsshsh
Do more cosplay DIY videos!
I will try to do more video like this but it might take a bit since I have a lot of school work
TheWizarding Journey me too I cosplay and draw but I almost never have time to because of school
I thought this was a ASMR
Same XD
Her voice was so relaxing 😂
THANK YOU SO MUCH FOR PUTTING THE MATERIALS NEEDED VERY MUSH APPRECIATED😭❤️
this really helped me make the scarf. however i did change the syringes. i used spray paint cans and foam.
that's great to hear
I wanted to make the syringes with spray paint cans as well at first, but ended up not having enough empty ones
Jungkooks Kookies is there a way to buy empty spray paint cans? or did you just use cans that you already used? i also wanted to use spray paint cans lol
her cutting into the carpet gave me anxiety... girrrl you need a cutting mat!
Do you have the dimensions you used for the scarf cutout? Or the shape of the scarf?
no sorry I was eyeballing it and going back and cutting off a bit of cardboard at a time
@@thewizardingjourney6800 what is that white thing that you put around the scarf?
me wanting to make this for my cosplay
me also thinking on how to tell my parents its a Blood-Sucking Machine lol
Yee Yee lol same
Same I want to do a genderbend toga cosplay and my dad watches Mha so knows who toga is, so...wish me luck!
You deserve like millions of followers you are so amazing i love you an di was SHOOK when i saw your followers
awww thanks
Your inglish so nice :3 My ears are enjoying from your voice 3333
You did so cool diy . I wish you good luck on your channel )
( Sorry if my inglish so stupid :'") )
THATS SO COOOOLLLL OMGGGGGG
This really helped me a lot cuz all of the other DIYs were really complicated but this one is not plus it’s cheep
glad to hear it helped you
Thank you for making this
Your thanking people for two hundred subscribers and now you have 1.9k?!?!?! Welldone bro
thank you :)
OMGG! We’re wearing the same shirt! I almost choke on my ice cream 😂
hahaha thats funny :) hope the ice cream was good
It was thank you! 😂
I was gonna go to my first Con this year,but then covid happened,I decided that I would probably just use this time to make the blood machine,And this video will be really helpful!!!!Also new subscriber(:😊
just a word: THANK U
no problem
This was real helpful!
Glad to hear that
Is Great stuff available in canada, newbrunswick? I'm going to Animaritime in june and i'm on a tight schedule!
Not sure but any spray insulation foam would work doesn't specifically have to be the great stuff brand
My english is bad but I want to say Thank you! 😄 I want to cosplay toga but I am new and I don't know much about cosplay so yeah thanks 💞
your English is actually really good, that"s great to hear that this video will help you out making togas cosplay , hope you have fun making it
I know im kinda late but this looks so cool!! Thank you for the tutorial! This is one of the best tutorials on youtube👀 also, your mask looks really cool,how did you make it?💕
thank you that means a lot
no problem hope it helped
thank you I actually have a second video that involves the rest of the cosplay the mask tutorial should be in that one
here is the vid hope it helps ruclips.net/video/g2Pams2wh3I/видео.html
TheWizarding Journey thank you so much! It helped a lot ^^
what are the measures of the spray bottles?
I believe they are 16 OZ spray bottles
whats about the length of the Vinyl tubing cause i'm planning on buying some but i want to get one thats not that pricey and so i wont have to much extra
i don't remember sorry, I just know that I got the smallest role of vinyl tubing that my hardware store had
WOW. Thank you so much for this tutorial!
no problem hope it helped
That was amazing 😍😍
I will do the same
Can you make diy Kagune Hinam from Tokyo goru?
Thank you
I don't really watch tokyo ghoul so probably not, but if one of my friends wants me to make a cosplay of that character I'll for sure film it
Just wondering how long did this take to make? Also it’s amazing!!! And I’m going to try and create it myself thanks to your tutorial!!
I was working on and off it for 2 months. Thank you :) yahy thats great to hear
I am also attending AX as Toga this year and I am attempting her gear 😂😂 Thanks for your video!
Kays Downing ahhh thats great :)
are you going to go to any of the MHA gathering?
TheWizarding Journey I might I think day 2 or 3
Kays Downing thats great mabye I'll see you there 😊
That's so cool Ash!! And by chance have he tried it on/seen it?
you're so amazing. 💗 would love to see more of your future content. owo
HarukiRuki aw thank you that means a lot, I will try to post more cosplay videos but might take some time since I have a lot going on with school right now
I’m going to follow this tutorial for my Toga cosplay v.2 but I’m gonna either dye the inside of the tubes a light red like it’s stained or put red LEDs in them!!
Wow that sounds really cool, I bet it will turn out great
TheWizarding Journey
thank you!! I decided that I’m going to do the LEDs, just cuz I’ve never done that type of thing before lol.
(I’ve only been cosplaying for a couple of years now but they’re improving a lot! I think the LEDs will also help up my cosplay game xD)
@@thewizardingjourney6800 3 years later, I’m here to redo the work I did back then. Because of my upgraded cosplay I was invited to a panel at a con as Toga. :) making a few more upgrades to prep. So thank you for that!!!
I’m going to anime expo this year! Nyc right?
Awesome
8:00, if you're still having trouble with that, you should either make the slits to the belt as you did with the bigger ones, or get this glue called E6000. It sticks to everything, I mean everything, just try to not get it on your hands (if you do, wash it off very soon after).
great thank you for the tip, I will try that and see how it holds up
Me: Hehehehe I'm ready UwU
Also me: *burns self 100 timez with glue gun* no pain no gain QwQ hehehe
Hola jeje todos hablan inglés UwU
Bruh where the volume on this thing 😐😂
That’s actually mean what
at around 2:30 what did she say she sprayed on it??
Green stuff? Cream stuff?
aNimAL AbUsE Great Stuff she put a link in the description box
Wow i cant believe you made that
OMG!!!
This was sooo helpful thank you! There aren't many tips online about how to do this cosplay so i appreciate it! Looked amazing too :)
glad to hear it was helpful. Yah when I was making the machine I ran into the same problem that there weren't that many tips. Thank you :)
Getting my first ever cosplay and its toga and im gonna make the "gear" for her by hand
That's great, hope you have fun making it
@@thewizardingjourney6800 i definitely will 💖
This was super cool! I have to ask though, how much did it cost all together in the end? I'd love to know 😁
turntechToreador most of the materials i already had but if i would have to guess mabye 40 or 50 for the blood sucking machine alone
nice
Could you also make the blood containers in the back out of cardboard as well?
yah I see why not
Where can I buy the blood sucking suit?????????
OMg thank you!
you welcome hope it helps :)
2:30 i couldn't understand what u said what did u use off camera to make it that thick look?
its called great stuff its an insulation spray foam
What did you do when it started cracking ? Mine has cracked super badly and I’ve tried making it crack free but it just continues to crack 😂😂😅 help any one ?
i just went over it again with water and more air dry clay and smoothed it out multiple times till there were no more cracks
im going to be making a toga cosplay and this video is very helpful! but i was trying to figure out the lengths for the tubing? like about how long was each part of the tubing?
i didn't include those measurements because it really depends how tall your torso is. But basically to measure it out hold one end of the tubing around where your waist is and then bring it up to your shoulders, make sure to give a bit of extra tubing like 2 inches or so since it is not stretched out with toga and stands out a bit, hope this helped
@@thewizardingjourney6800 this does help! Thank you!
You deserve more subscribers... i mean... you'll become famous omg!! But i was just wondering what about the back? I mean where she carries the blood?*^*
aw thank you that"s so sweet of you. To be honest I don't really care if I become famous or not I just love creating videos for you guys
there should be a part in the video explaining that, but basically I used two spray bottles and attacked them to an elastic band and then had the tubes from the scarf running into the spray bottles
Does anyone know the length of the vinyl tube she got? The link is broken.
This one has the same dimensions as the one I used, although I did not end up using all 10 ft of the tubing, I think i had like 2 or 3 ft left in the end.
www.amazon.com/ID-OD-Vinyl-Tubing-Approved/dp/B01LWSPRCG/ref=sr_1_2_sspa?ie=UTF8&qid=1548395696&sr=8-2-spons&keywords=vinyl+tubing&psc=1
What is the material she used in the carton that is white
it is called great stuff and it is an expanding insulation foam, hope that helps
3:07 what's that white like foam? Can you say me pliss
A spray insulation foam I used the brand great stuff
Hope it helps
I love You
Thx for this bautifule vidéo UwU You are the best thx you so much !!
thank you :)
TheWizarding Journey your welcom :3
Where did you get the wig besue you do a good cosplay
I bought it on Amazon
this is the one I got: www.amazon.com/gp/product/B074PL82G7/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
hi, I saw this tutorial and wanted to ask you one thing. What is the size you used to make the cardboard part? Thank you
I don't remember what size I made it, but I know it was a larger box that I used and that I cut out a bit more than I thought I would need it to be. Once that was cut out I went back and forth between looking in the mirror to see if it fits and cutting off little by little. Hope this helps
@@thewizardingjourney6800 Thank you very much for your availability and for answering the question. I'm also doing the Himiko Touga cosplay and I'm getting by with the material I have at home. And luckily I have a lot of cardboard
what did u spray to give it a three dimensional effect with the neck costume?
it's called "great stuff"
And did u had to do sketches? Like for the design? If I could get them I’d appreciate it so much T-T
I don't have any sketches of it sorry I kind of eyeballed everything
TheWizarding Journey Nunu actually thanks! That helped me lolol! It's just simply amazing
Can I be able to use cardboard or squishy sponge like foam to make the teeth?
i don't see why not, should work the same
I'd hhave to finish this by july-
Doji COS metrocon?
Onion Child ive never heard of that- no, I'm going to herohype doing vendor stuff
Doji COS Oh lmao, nice :)
How did you figure out like wear your shoulders are on the prop
i placed the cardboard without the foam on top of my shoulders to see how if would fit and then cut it to size and then sprayed great stuff on top
i have the same bed as u✌️
This is a ASMR ?
No!!!
Thank you for this,, but can you talk a bit louder next time?? Xd
Np, yeah it was the mic that I was recording with but I have a better mic now that will record the audio much better.
10:38 clear "fix it" spray? What kind of spray does she use for glossy finish ?
It a spray fixative spray you can find it in any craft store with the spary paints and they have many different finishes I just chose the glossy one
what is that white thing that you put around the scarf?
It's called great stuff it's an spray insulation foam
What about the stockings?
i just bought the stockings online since it was cheaper just to buy them than to make them myself
What is she going to do with the holes at 6:50?
i made the wholes so that i could drill the syringe to the scarf so that its more secure
on 2:57 what the material that is being used
It's called great stuff it's a spray insulation foam
Can you put a list of the materials used in the video?
yah sure I'll put it in the description box
TheWizarding Journey thanks so much
no problem the list is in the description now
How many centimetres and l
width you put in the cardboard??
I really don't remember sorry. I just cut out the rough shape out of cardboard first and then tried it on and then cut it some more to make it more proportional
More cosplay vids pls!!!!
Anonymous Dino i will try to do more cosplay vids
How did you secure the vinyl tubing into the two jars on the back of the gear?
I hot glued them in, but every time I come back from a con I have to re-glue them back in so if you are looking for a more sturdier method I cant help you with that cause I'm still trying to find one myself
Contact cement works for me. I made a scarf and used contact cement instead of hot glue!
i only wanted the knife lol
About the syringe ir say 16 ir 60 milliliter?
60 ml
@@thewizardingjourney6800 thank you I love you I'm actually doing my togas cosplay swit
@@julieta1254 no problem
nice
How long was her scarf and what was the width?
I don't know how long it was i just eyeballed it and then before using the great stuff I taped it together and looked if I needed to adjust anything
I don't understand what you were doing between 1:51 to 2:04?
I'm just taking and exacto knife and am pulling it trough so that only a bit gets cut. this makes it easier to bend the cardboard and get a more rounder shape
+TheWizarding Journey Oh okay I see, thank you very much! I wasn't sure what you were doing haha
no problem
How much vinyl tubing would I need?
not really sure how much it was but i got two packs of the precut vinyl tubing, I'll add a link to the description of what it looked like
sorry for my bad explanation
What did you do about her weapons
I go over how I made the weapon in this video ruclips.net/video/g2Pams2wh3I/видео.html
Hey Ashley
Hi
Can you give me the data you use? what cloth do you use
한나 not sure if i understand your question, but if you were wondering about the clothes that i used, im going to try to post a video this sunday about how i made her cloths and her mask. hope that helps
I cut my fingers so many times but it was worth itt
Oh no hope you're alright
That's great to hear
MORE COSPLAY
I have a bunch of cosplay video recorded but not edited yet, but it might take me some time to get them uploaded since I have con prop to do right now
Helloooo
wtf you remind me of R from mean girls lol
Do you know the measurements for the box you used
no I do not sorry, I just cut out the rough shape I wanted to have out of cardboard and then cut it more to look more proportional
I cut myself trying to make this I'm 11 so I started to freak out I cant make it😥😭😭😭😭😭
oh no hope all is fine, is this your first cosplay? I have been making my one cosplay for about 3 years now and only just started to get into more complicated cosplay like toga and 13 one year ago. With enough experience and maybe help from someone you will be able to make this cosplay as well
Try over head cameras, dork
oi. tbh i have to say. there is no point in complaining. look at her other videos sometimes. she uses overhead camera. also, don't just yell at someone when you have less of a following bases then her, its just stupid. why are you here? how about you use some overhead camera work in your videos too? haven't seen it yet
DoRk
The props made are really ugly
You are also extremely bad at giving directions and showing what is actually happening.
:( I don't think she really asked for ur opinion lol
Agreed
Stop whispering! Jesus its so hard to hear you
Audio is literally terrible