probably oversized by far, half the registers closed/broken/blocked, lack of return air and plugged everything. you know, the usual hacked and butchered dinosaur homes. 🙄
I was told to replace my furnace 14 years ago when the circuit board shorted out and blew the circuit board. I said replace the board and she's still running great to this day.
4:36 here in Florida, the HVAC companies that come and do a tune-up when have service agreement with do not clean fan motors or blades, do not clean outdoor unit with hose or blow out leaves and junk, they just check indoor units and see if clocked lines, put cleaner down and hook shop vac to condensate line outdoors and then add water back so not dry. That about all they do and have time don’t screw covers in correctly and always fixing along w/ cleaning up all the crap from shoes etc…when leave. DO LIKE HOW THOROUGH you guys are and CLEAN!
You did a great job, but I think you should have checked the rise, You are most likely correct the evap is dirty, You should have been able to see the high limit open and it could be bad, you also have the option to speed up the heat blower to high speed and bridge it with cooling speed on the IFC, so that more heat is disapated
I get it that it's a 20 year old unit and it's a emergency sunday job, but I'd like to know if washing the blower wheel is reserved for summertime as a extra that customer can choose? Don't wanna be creating slipping hazards with icing conditions outdoors anyway
Someone is brilliant. The last Trane was installed in front of a jackpost, this one has the gas cock inside the cabinet. Obviously Trane installation training is “SPECIAL “. Happy Hanukkah Mike to you and your family.👍👍🇨🇦
NIce job MIke, too bad they went with the parts and labor. They are going to regret this decision pretty quickly. You were honest with them and made sure they were safe from CO, at least until that heat exchanger gives out. Happy Hanukkah and may God bless you.
7:19 OK, that is the way to do it, first time seeing a tool like that, where I usually just use ban saw to zip it off. That pretty cool. Also, I’d put new battery in smoke detector b/c the beeping in making me whacko🤪
I don’t doubt that the homeowner has a dirty fan, they probably have dirty ductwork too. I’m surprised that they didn’t opt for duct cleaning, maybe after they watch the video you can sell them a new system and they can get their ducts cleaned. Side business for you?
it will just bang off the high limit, until it doesn't because something failed. 🙄 probably been doing that for the last 3 years or it's whole existence.
Second Service Call this week with a 🦗Cricket 🦗Infestation. Either Customers are Deaf or their Hearing Aid batteries are Dead. How can they Not Hear it ? 🤪👎
Hello dr henry p davis lll of the first baptist church of highland park. Checking in on the blue collar community again. Who Mikey, well he pleaded not guilty again. The Lord of host said, don't play with him, go play with your brothers and sisters again.
Did you just waste 500+$ on a 20 year old unit? New 80% cost 2500$ installed last another 20 years.. hope that heat exchanger isn’t ready to pop because it’s yours now
@@wundo9372 basic unit is 60k btu is 950$ sheet metal and some gas nipples 1200$ for materials maybe with no chimney liner . 1300$in labor one guy 5 hours of work. Have fun robbing people I’ll take your customers
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Wishing you a Very Merry Christmas and a Safe, Healthy and Happy New Year. 👍🙏
Happy holidays to you and your family
Thank you for showing the importance of proper licensing. A true pro!
The tripping high limit makes me think it’s a dirty evap coil, based on seeing how dirty that blower wheel was.
That’s also a possibility
probably oversized by far, half the registers closed/broken/blocked, lack of return air and plugged everything. you know, the usual hacked and butchered dinosaur homes. 🙄
Mikey great work. But damn wear PPE when you clean a blower wheel like that. I was choking watching it.
Like that shaft blaster
Change that damn chirper battery 🤣……
Merry Christmas Mickey Pipes ….
I’m immune to those chirping alarms
@
Seems like one is always chirping when I help my HVAC guys out
I was told to replace my furnace 14 years ago when the circuit board shorted out and blew the circuit board. I said replace the board and she's still running great to this day.
GUAUUUUUUU FROM CHICAGO GOD JOB EXELENT VIDEO THANK YOU SO MUCH
Pipe Doctor is the superhero of home repairs! 🔧🦸♂
Pipe Doctor never fails!
Thank you for showing what quality service looks like! 🙌
I learned so much from this video. You’re a fantastic teacher!
Fast and efficient! 🚚💨
Good job. Man that smoke detector chirp was annoying.
So just like the homeowners, I am also immune to the chirping sounds of smoke detectors and carbon monoxide alarms
Fixed it perfectly, thanks!
Shaft blaster is awesome
I’ve been doing it for years and it has never let me down
4:36 here in Florida, the HVAC companies that come and do a tune-up when have service agreement with do not clean fan motors or blades, do not clean outdoor unit with hose or blow out leaves and junk, they just check indoor units and see if clocked lines, put cleaner down and hook shop vac to condensate line outdoors and then add water back so not dry. That about all they do and have time don’t screw covers in correctly and always fixing along w/ cleaning up all the crap from shoes etc…when leave. DO LIKE HOW THOROUGH you guys are and CLEAN!
We typically spend one to two hours for an HVAC tuneup
Holly cow that is dirty that what happens when you don’t change the air filter frequently good stuff
You did a great job, but I think you should have checked the rise, You are most likely correct the evap is dirty, You should have been able to see the high limit open and it could be bad, you also have the option to speed up the heat blower to high speed and bridge it with cooling speed on the IFC, so that more heat is disapated
I get it that it's a 20 year old unit and it's a emergency sunday job, but I'd like to know if washing the blower wheel is reserved for summertime as a extra that customer can choose?
Don't wanna be creating slipping hazards with icing conditions outdoors anyway
Just to be clear you left the job with the cover still removed? If so what’s the plan?
Someone is brilliant. The last Trane was installed in front of a jackpost, this one has the gas cock inside the cabinet. Obviously Trane installation training is “SPECIAL “. Happy Hanukkah Mike to you and your family.👍👍🇨🇦
Mike, Happy Hanukah
Damn I'm just holding my breath while you clean the blower wheel!!!
Do you think it could be oversized?
NIce job MIke, too bad they went with the parts and labor. They are going to regret this decision pretty quickly. You were honest with them and made sure they were safe from CO, at least until that heat exchanger gives out. Happy Hanukkah and may God bless you.
Merry Christmas and Happy Holidays!
Do you travel to cny ? No one can fix my heat
Just started watching, really hope you clean that wheel Mike. Water works better than a nylon brush, just saying….
Licensed and it shows!
John Phillips posted
On his personal FB page 5 hours ago I think all is well. Probably just taking some time off.
Thank God, he’s still around
Merry Christmas and happy Hanukkah pipes
Happy Holidays!
Yo Mikey, or anyone who's used it, would you recommend Housecall Pro for a one man operation?
I would recommend ServicePal for a one-man show
@PipeDoctor Thanks! Merry Christmas, Happy Hanukah, New Year and all that stuff!
Hey Mike Daick, Happy Holiday to you and yours. Mikey open the pod bay doors, Mikey open the pod bay doors, Mikey open the pod bay doors.lol.
Those darn ceiling birds
There everywhere
7:19 OK, that is the way to do it, first time seeing a tool like that, where I usually just use ban saw to zip it off. That pretty cool.
Also, I’d put new battery in smoke detector b/c the beeping in making me whacko🤪
It’s called the shaft blaster
NSFW
Your welcome
Great video. Happy Hanukkah Mike!
Happy holidays!
So the board was toast? Or a likely suspect?
@ yes sir
ahh, the old rubber isolator end mounted motors, it rotated around and eventually rubbed through the wires. bzzzzzt, game over.
Yea Baby. We not only had asbestos flooring but also insulation and the siding on the house . Can't hurt you if you can't see it right?
You got to be kidding me!
just don't disturb it and all is fine.
I don’t doubt that the homeowner has a dirty fan, they probably have dirty ductwork too.
I’m surprised that they didn’t opt for duct cleaning, maybe after they watch the video you can sell them a new system and they can get their ducts cleaned.
Side business for you?
I would have checked temp. rise. Manifold gas pressure and checked the AC coil when you had the blower out. Otherwise, it's all good.
Thanks for sharing your feedback yeah, I could’ve checked that as well
I would of fired you for not checking the supply and return temp. Here comes a callback
Well, guess what? It’s been almost 72 hours.
it will just bang off the high limit, until it doesn't because something failed. 🙄 probably been doing that for the last 3 years or it's whole existence.
Well done pipes
Ty again. Happy Holidays
Mikey pipes use a hammer drill with a pointed tip and hit that shaft with the hammer drill they pop of in seconds
Second Service Call this week with a 🦗Cricket 🦗Infestation. Either Customers are Deaf or their Hearing Aid batteries are Dead. How can they Not Hear it ? 🤪👎
They are immune
They need a new furnace and AC!
Absolutely agree
Why does that motor sound as bad as the old one?
It’s the inducer assembly, silly
another entertaining and informative video Mike 👍💯
Thanks for watching!
great job nice to see a
furnace video every once in awhile
Thanks for watching!
Make the trades Great again Mikey Pipes. #LoveBosch smash that Like button for Santa Claus. Smash a Raindeer
GOOD JOB MIKE GODBLESS HAPPY HANUKKAH AND FAMILY MUY BUENO SHALOM BENDECIONES ❤❤
Hello dr henry p davis lll of the first baptist church of highland park. Checking in on the blue collar community again. Who Mikey, well he pleaded not guilty again. The Lord of host said, don't play with him, go play with your brothers and sisters again.
Thanks for your continued support
as soon as trump starts the economy back up thing will be better hold in there mike
First thing he’s gonna do is cancel all these electrification rebates
Its not that hard to stop a trane LOL
Trane equipment is better than most! How it’s installed and maintained is the most important!
@@bradmarshall7075Really Darn Expensive also so it Better be Reliable. 🤔👍
Did you just waste 500+$ on a 20 year old unit? New 80% cost 2500$ installed last another 20 years.. hope that heat exchanger isn’t ready to pop because it’s yours now
2500?? Here he is officers, This is the Hack you’re looking for!
@@wundo9372 basic unit is 60k btu is 950$ sheet metal and some gas nipples 1200$ for materials maybe with no chimney liner . 1300$in labor one guy 5 hours of work. Have fun robbing people I’ll take your customers
It’s nice to see engagement from those who sell themselves short and die broke. Happy holidays thanks for sharing your feedback.
@@PipeDoctoror business owners who have to pay for there boat and new trucks by charging 6k to a old lady . It’s cool I’ll take all your customers
Always prefer OEM when possible