Most people utterly hate the Microtel machines, I quite like the design but i don't think they offer great cooling, my advice is to just cut holes in the back of the cabinet door with a core drill and mount a couple of beefy 120mm Fans ,
I’m having trouble with my Fast and Furious booting up. The Microtel went bad and I replaced it with the Optiplex 740. I popped the cd software and not it booting saying “error loading operating system” so I’m stuck now.
Sounds like It's just not able to boot off the CD. You need to make sure the Bios is set to boot from CD first, if not it will try to boot from the fudged hard drive and fail without trying the cd.
@@pfun41 I have already checked the bios and set it to boot from the CD. Betson has a file that shows howl to properly set it up for the Bios and still no luck.
I have one . And have some problem booting .. I verified he is detecting hardrive the ram.is good but I dont know if the boot secuence is good in the bios. Can you help.me.out ?
My FF Drift boots up, however it goes into windows mode and then it shows new software install, then shows no software. Does this mean I need to install the disks again or is it a bios setting I need to change? Hope you can help. Great video
usually there a ground going to pretty much anything metal, but the wire is typically tucked in with the rest of the harness which helps narrow it down.
No Idea, I got lucky and found a used Video card that was identical on Ebay. Can't remember the model though. If you call Raw thrills they may be able to give you a list.
You have to buy a restore disk or find an ISO on the internet. Or buy a working f&f hard drive and clone it. You can buy restore disks through raw thrills or arcade parts suppliers.
Greetings friend, I have a problem with my super bike in which an error says: enginelnitfail code gdc-2005530518 I don't know if it's because of the graphic card that I install is different
@@pfun41 I have two machines with the same problem, I am following the same type of card, but the other is fine with its original manufacturing card and yet it shows the code error but the card is in good condition
Most people utterly hate the Microtel machines, I quite like the design but i don't think they offer great cooling, my advice is to just cut holes in the back of the cabinet door with a core drill and mount a couple of beefy 120mm Fans ,
i have a arcade that fails every time on the second race at the end of it any idea why?
Hi, what is the model of motherboard?
"First Boot agent" was that windows embedded from 2009?
No, this is from the early 2000s
Odds are standard xp embedded.
@@Imnotimportant555 yea prob
PLEASE I NEED CD F & F
Love seeing the guts of a v machine. Thanks for the vid.
hello, we have an F&F Super Bikes™ Apparatus we have lost the usb key. Can you help us ?
I’m having trouble with my Fast and Furious booting up. The Microtel went bad and I replaced it with the Optiplex 740. I popped the cd software and not it booting saying “error loading operating system” so I’m stuck now.
Sounds like It's just not able to boot off the CD. You need to make sure the Bios is set to boot from CD first, if not it will try to boot from the fudged hard drive and fail without trying the cd.
@@pfun41 I have already checked the bios and set it to boot from the CD. Betson has a file that shows howl to properly set it up for the Bios and still no luck.
I been looking for a Pc for it can you please point me in the right direction
PFUN41
---> some arcade games have a State Machine PROM chip, what does the state machine prom do?
I have one . And have some problem booting .. I verified he is detecting hardrive the ram.is good but I dont know if the boot secuence is good in the bios. Can you help.me.out ?
plug in a keyboard and enter the bios on boot like on a normal computer and verify boot sequence.
My FF Drift boots up, however it goes into windows mode and then it shows new software install, then shows no software. Does this mean I need to install the disks again or is it a bios setting I need to change? Hope you can help. Great video
I am restoring a FNF, but I have no idea where the grounding straps are supposed to go; can anyone help me? Thanks!
usually there a ground going to pretty much anything metal, but the wire is typically tucked in with the rest of the harness which helps narrow it down.
What's the PCI card on the top slot for?
You can mod software to run on new hardware people do that because computers died
Hi. Did you know what exact video card models works for the Fast and The Furious? Been crazy trying to find a replacement last weeks
No Idea, I got lucky and found a used Video card that was identical on Ebay. Can't remember the model though. If you call Raw thrills they may be able to give you a list.
where can i get the files to reprogram the hard drive for this system?
You have to buy a restore disk or find an ISO on the internet. Or buy a working f&f hard drive and clone it. You can buy restore disks through raw thrills or arcade parts suppliers.
Greetings friend, I have a problem with my super bike in which an error says: enginelnitfail
code gdc-2005530518
I don't know if it's because of the graphic card that I install is different
IIRC GDC prefix usually refers to a graphics issue. There's only a handful of graphics cards the software will support.
@@pfun41
I have two machines with the same problem, I am following the same type of card, but the other is fine with its original manufacturing card and yet it shows the code error but the card is in good condition