Hi mine have the latch on the right and didn’t work because when is trying to open actually close and start sounding like is stock. Do you know how to change the programing for door that open from the left side? Thank you very much for your videos
Yes, so that would be the re-handing process. It would be the same as this video ruclips.net/video/-quGYe3AosQ/видео.html - You would pull the battery out - hold lock button - drop battery back in while holding lock button - the deadbolt will move back and forth teaching the deadbolt which way to go.
Amazing video, thank you! Just as an FYI- after factory resetting you have to recalibrate the deadbolt. Remove battery > press/hold lock > insert battery > it will start moving the deadbolt, stop pressing lock > once it fully extends, put the backplate on, unlock and you’re good to go :)
Thank you so much i moved in to a new house recently, and the previews renter leave nearby and the landlord never reset the lock she just gave me the old code. And obviously having 2 little girl i wasn't able to sleep right.
Thank you for your video. I couldn't figure out why my halo lock wouldn't let me connect to the app. It kept saying I had to reset the lock then I looked at your video. Now it's working
We have Kwikset locks on our 3 entry doors and shed. 3 of the 4 are keyless pushbutton; all we installed at the end of January 2020. The one door stopped working last week. My husband thought it was the battery, so he replaced it. Still not working, it has no power at all. What could be the problem? We have all the same style and all oil rubbed bronze handles, knobs and hinges which is now hard to come by now, so can't replace it with silver color :-/ What could it be?
It not having power, it might be the coils where the batteries go. I have also seen when drop the battery pack in scrapping off dirt off the metal parts.
Hey Monak, I'd check these three things: Reset Lock Rehand Lock Make sure the powercord in lock is attached If all above are done I'd assume it is probably an issue with the lock. Hopefully this helps!
Is this the same process with Weiser locks since it’s part of the same company? Do you have a video showing how to create new master code after reset? Thanks!!!
Please help mine won't reset!! I get to where it starts flashing red but when I press the program button the light tries green beeps and that's about it no red and green flashing lights tried handing process and off course nothing
It could be a bad lock I know this is an older brand. I am sorry I can't be more help but normally these steps work. If it is not rehanding or resetting that typically means it needs to be replaced.
i try to connect my phone to my aura kwikset lock, and i hold down the A button until the light turns blue, but when i click on the lock to connect in my phone the light beeps and blinks red 3 times and doesn’t connect. i don’t know what’s happening because it’s connected before but now it isn’t anymkre
Hi! So my thing is installed and I just needed new batteries. However when I went to replace the batteries, nothing is working!!! Theres no lights, the keypad isnt working, and I tried different batteries as well and nothing!! 😭
I tried to add it to my Ring alarm but when press the 1 button it didn’t turn red and unable to add to my ring alarm. How do I reset the 1 button to turn red so I can pair it with Ring alarm?
Nice video but what kind of garbage system is this? Mine totally stopped turning. Doing this did nothing. Snapped the key trying to do this. One year, maybe 30 uses and the lock is totally useless. Next time avoid chinese import locks and buy a proper brand that doesn't "forget" how to work.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Hi mine have the latch on the right and didn’t work because when is trying to open actually close and start sounding like is stock. Do you know how to change the programing for door that open from the left side? Thank you very much for your videos
Yes, so that would be the re-handing process. It would be the same as this video ruclips.net/video/-quGYe3AosQ/видео.html - You would pull the battery out - hold lock button - drop battery back in while holding lock button - the deadbolt will move back and forth teaching the deadbolt which way to go.
Let me know if that helps.
Smart Home Helper thank you so much I will let you know
@@TheSmartHomeHelper It helped me, thanks!
The Man, The Myth, The Legend. A kind soul who got to the point and showed us that a simple fix is not 20 videos and a new door bell away.
I love you man!! Thank for this comment!
Amazing video, thank you! Just as an FYI- after factory resetting you have to recalibrate the deadbolt. Remove battery > press/hold lock > insert battery > it will start moving the deadbolt, stop pressing lock > once it fully extends, put the backplate on, unlock and you’re good to go :)
Thanks for sharing!!
After wasting my time with 8 other videos, I found your gem. Thank you. Worked like a frikin' charm!
Awesome to hear Jared!!
I couldn't get the reset procedure just right until I used this video, thanks.
Hey I am glad I could help and yes I made the video because I was struggling with it so much 🙃
Thank you so much i moved in to a new house recently, and the previews renter leave nearby and the landlord never reset the lock she just gave me the old code. And obviously having 2 little girl i wasn't able to sleep right.
Happy to help!
Thank you for your video. I couldn't figure out why my halo lock wouldn't let me connect to the app. It kept saying I had to reset the lock then I looked at your video. Now it's working
Glad I could help you out!
So helpful! Thank you!
Happy to help!!
Thanks so much for these quick simple instructions, gotta keep the squaters out!!!
Mary, I'm so glad this helped! Thank you for the feedback!
What is the rehanding process mentioned at the end of the video?
ruclips.net/video/I9An81mBigQ/видео.html
Thanks so much for this video. You are definitely the best!!!
Thanks Jaime! I appreciate the comments!
We have Kwikset locks on our 3 entry doors and shed. 3 of the 4 are keyless pushbutton; all we installed at the end of January 2020. The one door stopped working last week. My husband thought it was the battery, so he replaced it. Still not working, it has no power at all. What could be the problem? We have all the same style and all oil rubbed bronze handles, knobs and hinges which is now hard to come by now, so can't replace it with silver color :-/
What could it be?
It not having power, it might be the coils where the batteries go. I have also seen when drop the battery pack in scrapping off dirt off the metal parts.
Finally somepne with a straihjt forward and easy video. Thank you
You're welcome! Thanks for comment!
Does anyone know why my keypad for kwikset won’t work? It’s only been an year, and I’ve changed the batteries.
Hey Monak,
I'd check these three things:
Reset Lock
Rehand Lock
Make sure the powercord in lock is attached
If all above are done I'd assume it is probably an issue with the lock. Hopefully this helps!
Did I miss the part on re -setting a new code?
ruclips.net/video/cYFRW5RM1k0/видео.html
Is this the same process with Weiser locks since it’s part of the same company? Do you have a video showing how to create new master code after reset?
Thanks!!!
I actually don't know much about Weiser locks but where is how to create master code 916
Please help mine won't reset!! I get to where it starts flashing red but when I press the program button the light tries green beeps and that's about it no red and green flashing lights tried handing process and off course nothing
It could be a bad lock I know this is an older brand. I am sorry I can't be more help but normally these steps work. If it is not rehanding or resetting that typically means it needs to be replaced.
How do you take off the manual lock to get at the program button?
So most you just push up on the block piece on the back, but I think if I remember correct the 914 you have to squeeze.
i try to connect my phone to my aura kwikset lock, and i hold down the A button until the light turns blue, but when i click on the lock to connect in my phone the light beeps and blinks red 3 times and doesn’t connect. i don’t know what’s happening because it’s connected before but now it isn’t anymkre
Try this ruclips.net/video/vkTSotOaboU/видео.html I know sometimes even out of the package they are already synced up because they are tested.
@@TheSmartHomeHelper thanks for your help! i did try this but it didn’t work so i have no idea what’s going on
Mine didn’t have a battery pack sticking out like that
Most kwikset should have a way to grab it or pull it out
Thanks Owen Wilson
hahah Thanks for the comment!
Okay? Then how do I program my new code? It's reset, but I'm in limbo now.
ruclips.net/video/cYFRW5RM1k0/видео.html
Thank you this worked for me
Awesome! Glad to help!
Hi! So my thing is installed and I just needed new batteries. However when I went to replace the batteries, nothing is working!!! Theres no lights, the keypad isnt working, and I tried different batteries as well and nothing!! 😭
I hate to say it but it could be a bad lock. Normally when you drop the batteries in you here something😬
@@TheSmartHomeHelper oh my ): idk what happened I changed the batteries with no problem last time. Thank you for the reply though!
How do you just change the code?
ruclips.net/video/cYFRW5RM1k0/видео.html
I tried these steps but my lock will not reset my unit is slightly older than this one.
So what I might try is rehanding it right after you reset it and see if that helps ruclips.net/video/kSA6Bn-fNCo/видео.html
I tried to add it to my Ring alarm but when press the 1 button it didn’t turn red and unable to add to my ring alarm. How do I reset the 1 button to turn red so I can pair it with Ring alarm?
TK I would check the batteries if it is not lighting up and sometimes it takes a couple of resets as well
Smart Home Helper, new battery was input, it is not working still. I didn’t see a red light. It is yellow for me only.
Mine flashes red after the factory reset is complete
I would go ahead and manually rehand the lock as well after reseting to see if that resets the lock for you.
does it reset the actual physical keys too?
No it would not
Nice video but what kind of garbage system is this? Mine totally stopped turning. Doing this did nothing. Snapped the key trying to do this. One year, maybe 30 uses and the lock is totally useless. Next time avoid chinese import locks and buy a proper brand that doesn't "forget" how to work.
Thanks for the feedback Scott!
Dark
Thanks for comment