Understairs Oak Cupboard Door Build!
HTML-код
- Опубликовано: 3 авг 2022
- How I made a full size oak veneer door fit in to an a small angled understairs cupboard.
Tool Links
DEWALT Table saw amzn.to/3QvHg8L
DEWALT Router amzn.to/3TXbvbx
MAKITA Plunge saw 36v amzn.to/3KXpjP
Makita Plunge saw 240v amzn.to/3cYokBR
Makita Guide rail 1.5m amzn.to/3RSqr90
MAKITA Guide rail combo set amzn.to/3Qviypb
ESTWING Hammer amzn.to/3TYOx3O
Gazebo/shelter amzn.to/3cYqscP
These are affiliate links please use my links to help grow my channel.
Thanks Ben 
Хобби
Great - just fitted a load of architrave and skirting (DIYer) and the labels are a pain to remove!!! Come on Selco. Thanks for posting. Regards Mike
As an employee of the company that you (probably) bought it from. Its great to see a customer going to so much trouble for their customer, rather than telling them they'll have to have a ply flush. Lovely workmanship. Great to see. Thank you.
Thanks Julian 😀
Amazing job pleasure to watch a craftsman at work.
Thanks Adrian 👍
Heck of a nice job on that “oak” door. The finer details of your mortise work was enlightening. Beautiful hardware as well.
Thanks Steven that's made my day 😄
From one carpenter to another, great job.
Thanks bud, much appreciated 👍
what's the difference between a carpenter and a joiner?
@boo bye Joiner is just a Scottish term, carpenter is English. A bit like Lawyer (American) and solicitor( uk)
Work of art fella. 👍
A Joiner generally works in a workshop building joinery items such as doors, windows, stairs, shop fronts and cabinets etc.
A Carpenter you will generally find on site cutting roofs and building studwalls etc.
You get 1st fix Carpenters and 2nd fix Carpenters.
I trained as a traditional Joiner but now mainly do 2nd fix Carpentry.
Nice to watch,very professional job.
Thankyou bud 👍
Nice work 👍
Blown away. 👏🏾👏🏾
Thankyou! 😊
Good 👍 job, lot of work goes into what looks to be an easy job. Well done . From a fellow carpenter.
Thanks Carl, much appreciated 👍
Great job
Quality install. I've got one of these to do soon in my house... im not a joiner/carpenter, but after watching this, I'm sure I can do it. Subscribed.
Thanks mate let me know how you get on 👍
Great job !!!!
Thankyou 😁
Mint!
Thankyou Tony. 😁👍
Fantastic mate
Thankyou 👍
Top work mate 👏👏
Thankyou bud 👍
Nice result. Many wouldn't want it done once they knew the final cost down my neck of the woods
Thanks Gavin, I did quite a few normal doors with this one so the cost was spread out over the whole job. But if I was to do this on its own I would definitely charge a full day's labour.
Nice job. Well done.
Thanks Paul. 👍
Nice 1. Excellent work👍
Thanks Jordan 👍
Great work, I was wondering how you would cover the seen edge at the top as a hardwood strip would look out of place until I seen the veneer going on. Looks beautiful mate.
I feel your pain with the sticky label situation, they really are a nightmare… brilliant job though, very nicely done 👍
😆 yep absolute nightmare! Thanks Kevin 👍👍
Nice job bud 👍 wood have went for a roller ball and wee nob handle save people catchin themselves. Keeperher lit 🔥
Thanks Bud 👍
Superb
Thanks Nick.
Got a link for the door handle? Beautiful work!
Thanks John amzn.to/3RZf1na
Excellent work my boss would want this knocked up in an hr because he doesn’t have a clue what goes into making something properly
That was quality
Thanks 😄
Can you tell me if you cut the top point off the door for clearance purposes or if it was already like that? I have a door same situation and I still have the point on the door but as it stands I will be unable to close the door unless I back bevel to top of the door, the other option is to do something similar to what you have done here.
Now you my friend are very good, very professional great to watch
I did one 3 weeks ago but not as complex as yours and the customer was so made up as she was always told she would never get a door to fit
But I sorted it for her 😊both her & her husband where so great full
Iv subscribed too mate
Thank you 👍
Thanks Carl much appreciated, its great when we can do what others say is impossible. Im currently doing a Worcester oak mini door, even harder than the normal ones, havent got time to make a full video but will definitely make a short on it so look out for that.
Have you got a Facebook or Instagram with your work i can follow?
Cheers Ben
@@BNMCarpentry
Hi Ben
Yes I have mate but I’m so busy mate I literally just don’t have the time plus with being self-employed and working also for my wife’s company she would go absolutely mad if I took longer than I should especially as she calls it
Playing on ya phone lol
Can’t live with a mate can’t live without them lol
Nicely done ... Lots of quality details on show..
Where do you get your veneered oak doors from?
Thanks. Howdens UK 🇬🇧
Fantastic work .how did you form your inside margin at the top above the slots to look like the rest righ round if this makes sense. Thanks
Yes that makes sense. When I cut the side rails of the door offcut I simply kept the margin with the rails.
If you have a keen eye you may notice on the video the margins were not on the pieces I cut. This was a mistake and luckily I had the other side I could use. But I didn't record me cutting those sides so what you see in the video is me cutting buts I didn't actually use 😆
Here's another one I did you can see it more clearly. ruclips.net/user/shortsFUvdiE7s3RI?si=m_SxXyxHtPPgfrLR
AHH makes sense I've one to do in a few weeks so was wondering. thanks
Where abouts are you based? Would it be possible for you to do this on a pre finished door?
Beautiful door! How did you figure out what angle to trim off the top on the hinge side to get your door to close? I’ve built my own angle door which fits very nicely when I put it straight in but catches when I pivot the door closed. I haven’t been able to hang it yet because of this problem.
Thanks, does yours have the small horizontal piece at the top? Or is it just a long angled line from one side to the other?
@@BNMCarpentry it’s a long angled line.
Ok you need to angle the top angle piece by 45⁰ see my Instagram post for reference.
instagram.com/p/CZHV4F2MJdN/?igsh=MTV6cHg0Y3hlcjZybg==
@@BNMCarpentry wow!!! Thank you so much!!
Great job, Where do you get your oak veneer from to hide the chipboard ?
Thanks Luke, I just bought a small roll off amazon.
what door knob set is that?
I'm doing one of these tomorrow, how do you get over seeing the chipboard in the end of the middle rails once you've cut them?
Any exposed edges you can just oak veneer with contact adhesive.
Good luck. Let me know how it goes. 👍
Side of your chisle for those stickers
I find a blunt chisel works best. I've got loads of them 😆
Toonmuch Work
where did you get the oval dominoes please ?
They're called biscuits. amzn.to/3vJ28ot
Cracking job can you do a talking version lol
Thanks Bud, yea maybe one day I'm working my way up to it haha.
Are u based in the uk,
Yes Southern England 🏴
Tidy job
Thanks bud 👍
Great job how annoying are those stickers
Thanks Mike. Yea bloody nightmare those things are!
brilliant job,but mate those poxy labels 😡
Thank you, John. Haha, they drive me crazy!
Well done. Please look after your ears. You should wear good quality ear protective equipment.
Thanks Khaled, I had ear buds in you can see them in my ears when I was hanging the door. 👍
Just fitted some of these, pretty good door, but why do they insist on putting them feckin stickers on 😡😡😡😡
I know so annoying. Leaves that horrible residue on the edge. 🙁
He was doing so well! Then forgot the pull screws! 🤦🏻♂️
What's a pull screw Joe?