There's only a very few people who would tackle such a job ! You've done a splendid job in restoring the Rolls Royce back into its former state... Well Done !.... You have earned yourself a few glasses of Champagne from its cocktail cabinet...
imagine all the technique, developement and quality rolls royce puts into their carts, and these guys repair them with car filler hahahaha good job guys
Bless up to BackYardBoyz for creating the next level of amazing, understanding and quality content you guys are so blessed. Everytime you uplaod you make my day honestly. Always excited for new content!!!! Keep it up bro!!!!
You and me both hate using body filler lol. The sanding and more sanding never ending! Wish the doors were cheap would of saved you that long sanding process! Good luck from Half Amill Rebuilds !
Alright fella, On a top high end motor,for me just to much filler. And a lot of work rubbing it all down. Need more than red bull lol. Will be interesting to see how it turns out. Loving the vlogs though. Cheers Gary
This is a BIG motor car; over 19 feet long. Young Tim has his work definitely cut out, here! Well done, people, just keep on going steady. These doors are VERY heavy all right! But, she'll look just incredible when you've finished with her! Very best regards.
Hats off to you, horrendous amount of work. 7ft of blocking such a large panels. Hope all turns out when the paint goes down. Awesome job hope they appreciate it.
It should be required by law to post the VIN numbers of all project cars. I can't imagine paying 100k for a car and later finding out that it's a backyard Bondo buggy.
It look like it has to much filler on the doors but its not 85% of the filler is sand out . great job bro I don't mind what others says but I like your work bro 👍👍👍✔✔✔👊👊👊💓💓💕👌👌👌👍👍✔✔✔✔
Brilliant TIm! the reason i am watching you and waiting for new episodes with my eyes open is the technology you use for repair. The way you reach for repair inspires me.
Bravo! Sensational block work! Fab to watch! The folding of the bondo was quite satisfying... felt like we were making a Victoria sponge cake for the Royal Roller lol.
body filler on any Rolls panel = resale price dropped already with 30%. This is not a car which ends up at the shredder, it ages well like a good wine or whisky. And it's easy to check: knock with your finger on any panel, sound is deaf = body filler, sound is empty = metal panel.
There's only a very few people who would tackle such a job !
You've done a splendid job in restoring the Rolls Royce back into its former state... Well Done !.... You have earned yourself a few glasses of Champagne from its cocktail cabinet...
In my personal opinion changing the doors is the perfect way to repair this car
I got one of ur videos on my recommendations during COVID last year and now I enjoy all of ur videos
Love BYB ❤️
Restored 1968 rolls body work and all Chevy engine and hydro flight 3 speed transmission.
That's a lot, and I really mean a lot of bodyfiller.. wouldnt that crack over time?
Remember they playing cowboy with high en cars , dont take it serious !
You get my vote. There aren’t many up-market repair shops that would take on a Roller. I’ll look forward to seeing it finished. What a build!!!!
imagine all the technique, developement and quality rolls royce puts into their carts, and these guys repair them with car filler hahahaha good job guys
To right, its a Roller, show it some respect.
THIS GUY DOESNT EVEN KNOW HOW TO APPLY BONDO.
you can build and house with that much filler :D
Rather than spending 20k for a single door🤷🏻♂️
That Royce rolls is a battleship 🤣
It’s really not that much filler. It’s super super thin
Tim is wicked at what he’s doing here content amazing don’t really see good alloy body panels beaters so good well done
@@BackYardBoyz after all the needed sanding the leftover filler is really thin. It only looks that much before the sanding process
Bless up to BackYardBoyz for creating the next level of amazing, understanding and quality content you guys are so blessed. Everytime you uplaod you make my day honestly. Always excited for new content!!!! Keep it up bro!!!!
Tim has reached a new level.
You and me both hate using body filler lol. The sanding and more sanding never ending! Wish the doors were cheap would of saved you that long sanding process! Good luck from Half Amill Rebuilds !
Tim your skills are for real 🇬🇧🇬🇧🇬🇧👍👍
Thank you brotha!😎🤜🏼🤛🏼
Here we go, waiting for this 👀
Alright fella,
On a top high end motor,for me just to much filler.
And a lot of work rubbing it all down.
Need more than red bull lol.
Will be interesting to see how it turns out.
Loving the vlogs though.
Cheers Gary
That car is going to look brand new when you're done!
16:46 - Oncoming traffic would prefer you turn your highbeams off.
I was wondering how the aluminium doors would be handled and as usual BYBTIM had an ace up the sleeve,... Mind blown!! 👍🏾
That big spatula is doing you no favours. Seemed to pull off filler and create valleys. admittedly worked well when the door was off the car.
You must have the patience of a Saint with all that rubbing down. I think we had the dust storm over here in England.
This is a BIG motor car; over 19 feet long. Young Tim has his work definitely cut out, here! Well done, people, just keep on going steady. These doors are VERY heavy all right! But, she'll look just incredible when you've finished with her! Very best regards.
Superb, you've done that RR justice.
Hard and dedicated work always pays off!!! Good job!!!
Hats off to you, horrendous amount of work. 7ft of blocking such a large panels. Hope all turns out when the paint goes down. Awesome job hope they appreciate it.
🔥 brining back that machine
Tim you must get some orange jump suits when doing this kind of body work...
They say the Rose Rolls is hand built and who eals to rebuild one than the best RUclips car body builder. This is some next level staff.
I start feeling tired while watching you working on door 😅😂
Amazing skill Tim. Keep on going like this you're on the way to 1M subs.
It should be required by law to post the VIN numbers of all project cars. I can't imagine paying 100k for a car and later finding out that it's a backyard Bondo buggy.
hats off to prople who save things that otherwise wouldve been scrapped
We need b4 and after comparison, show off your skills!
It look like it has to much filler on the doors but its not 85% of the filler is sand out . great job bro I don't mind what others says but I like your work bro 👍👍👍✔✔✔👊👊👊💓💓💕👌👌👌👍👍✔✔✔✔
That would look brilliant two-toned Black and Silver. Just follow that center body line as they done on the Silver Shadows.
Welcome back tim and greetings from Colombia
Well done Tim !!
Pllzzzz make more of these long edits so sick!!!!
Yooo after this build im certain we will c a mcleezy because damn that car is expensive💀💀🔥🔥
Tim, you need to get the new shop finished :-)
Well done, man give yourself a good rest, great job, love your work 👏👏👏
Great work. Saving money is absolute ok,when the quality is like I have seen here. 20 k for new doors is not necessary
I would never put that much filler on a 2k dollar VW, let alone a Rolls Royce. Insane.
Really enjoy seeing you guys working 😃 ... Maybe put another tent as work/paint area!?
Great attention to detail
Tim, you did a wonderful job on the Rolls doors!
Good job brother 👍
This is seriously impressive stuff!
Rolly royce cars are on another level looks suoer dope and you guys are lucky to own a Rolls Royce
Amazing, puis deserve more and more subs
Tim, have you ever thought about taring that place?
Prop to you for all that sanding. My arms hurt just watching you sand all that bondo lol keep the rolls videos coming
Great work Tim keep it comin 👍🏾👍🏾👍🏾💯
A lot of hard work 💪🏻 the doors look straight 🇺🇸
This should be called SculptorBoyz
Titanesque amount of work,well done !
DUDE'S !! Epic Job !! WOW !! Superb Job
you guys really know how to do body work you are an inspiration , cant wait for the next one.
Wow wtf. That looks good af. Nice job boyz
Brilliant TIm! the reason i am watching you and waiting for new episodes with my eyes open is the technology you use for repair. The way you reach for repair inspires me.
Grab the hood emblem for us ;)
That would be brilliant two-tone Black and Silver just follow the body lines as the older Shadows.
Great work on Rolls. I live in Vancouver. Nice video.
Awesome videos lately. Keep it up bro
You’re a very talented chap! 👍
Perfect job men it's a pleasure to look at your videos 👏👏👏👏👏
Watching this bodywork gives me satisfaction... just bcs I dont have to do it. Just like you said, i hate that part too in my job. 😂
Wow!...... Great content!.. .... Great results...... Super work!! ☺😊👍✨
Nice job Tim, new doors at those prices would be a joke! Big respect to you buddy! 👍😊
this built is truly a masterpiece👍
damn dude, i hate huge body work projects, props to you on this!
you put too much hardener in, that's why it caked up quickly...
Looks awesome, a lot of hard work 👍🏻
Bro u just worked through the whole night? Damn
thats awesome work !
regards from Germany,
Uwe
Its a spackling blade. 😀😀😀
Wow
The most processional work I have ever seen 💕🌷 all love to u (💟B💟Y💟B)
Hahah you are savge paint a rolls Royce in the back yard👑👑👑
You arecan amazing craftsman
I think u should just stick with 21:9 aspect ratio
The doors like sick with the filler and guide coat on them 🤣 don’t even paint it just throw clear over it, that would be a sick paint job
Anyone know what the tune is at 18:33? Thanks
What grit did you start sanding the filler with?
Spot on Tim like all your work., 🇬🇧👍😊🇬🇧
Monster effort
ROLLS ROYCE sponsored this video
Bravo! Sensational block work! Fab to watch! The folding of the bondo was quite satisfying... felt like we were making a Victoria sponge cake for the Royal Roller lol.
What the blue stuff that goes in the Filler?
hardner
saved $20,000 doors with $15,000 in labor...
Tim.. your work is amazing but you look like your plastering a kitchen, needs must eh, love the channel bro...💪🏻🤔😂
When he put on the glove 🤣🤣🤣
You would make a good cake maker with icing sugar.
after you finished it will be armored 😇😆
Can't beat a Toffee late from McDonald's dude 👊
Great work
Tell us the songs on your background we like does music and is for the second time I am asking you this
body filler on any Rolls panel = resale price dropped already with 30%. This is not a car which ends up at the shredder, it ages well like a good wine or whisky. And it's easy to check: knock with your finger on any panel, sound is deaf = body filler, sound is empty = metal panel.
16:45 Dude is driving with Fernlicht ...
Wish i would know u so u could teach me some!
I litteraly live so i can get my driver license and just get away from every thing!!!
Banger
Damn you are a beast.....awesome job dude
RR , what next? Lambo,ferrari, I can see its coming
I say perfect job