Ive put mine together and got loads of spare stuff, 3 small screws, 3 large screws, 8 shelf pegs, 4 f shaped things (4:15 in your vid), 2 discs and 2 plastic squares. I dont know what ive missed.
I get one and I find it really dummy. If you want to fix the shelves so you have no space between the shelves and the back wall there is a hole between the shelves and the doors. If you have the shelves "between" the doors aligned at the front you have space between it and the back wall so small things can fall down. Really dummy. At a first glance you can think ok it is not so expensive. But if you have the TV console plus two columns plus certain type of doors and handles you are far away from cheap! I mean one of the design I made on the website was around 1300€! :/
@@Keitex Same issue, if it wobbles, I cannot align 3 doors perfectly because it's bending to one side, and it's because door weight. Any idea how to fix this? Also if I open the 3 doors the furniture comes to front, so it's very dangerous.
@@abcmsaj I finally managed to do it. I think that I just didn't put it precisely the first time. There is a channel on both sides of the back panel that has to fit precisely with the side panels. You have to find the right spot. If you are forcing to put the back panel too much inside the channel of the side panels, it won't fit well.
@@Marco1502 thank you, I've ripped the thing now because I lifted the frame up while it was in and it tore... I'll try and get it replaced by customer services but I'll give it another go with the broken piece tomorrow! I was doing it on hardwood floor too so it was sliding around everywhere, so will maybe do it on carpet
@@Marco1502 Sorted today... Super glued the broken back piece, put the frame on carpet, it slid in with no issues! Was just having awful luck with it last night - thanks for your comment again
@@Keitex 😱 i wasn't ready for that video. i got the thin one and added doors to it and i'm trying to figure out how to solve the tipping problem as i'm not allowed to drill the wall in this flat and i can barely open the door without it wanting to fall forward. also my drill isn't strong enough to handle the concrete 😭
Thank you very much! I saved alot of money doing it myself because I was about to call someone from Task Rabbit to put it together.
Thank you 🙏
Ive put mine together and got loads of spare stuff, 3 small screws, 3 large screws, 8 shelf pegs, 4 f shaped things (4:15 in your vid), 2 discs and 2 plastic squares. I dont know what ive missed.
Same 3 different ways to put on a shelf.
The plastic squares are to cover where you attach to wall and hide the screws
Is it required to screw it to the wall?
it would be better
ruclips.net/video/3os0zmXY4-w/видео.html
Personnaly i didn't screw it to the wall
Hi, honnestly I did it. Even empty with just the doors mounted it wanted to swing forward.
I get one and I find it really dummy.
If you want to fix the shelves so you have no space between the shelves and the back wall there is a hole between the shelves and the doors.
If you have the shelves "between" the doors aligned at the front you have space between it and the back wall so small things can fall down.
Really dummy.
At a first glance you can think ok it is not so expensive.
But if you have the TV console plus two columns plus certain type of doors and handles you are far away from cheap!
I mean one of the design I made on the website was around 1300€! :/
My frame wobbles a lot ? Do you think its faulty ?
the BESTA frame is light, it may be normal for it to wobbles a little
@@Keitex Same issue, if it wobbles, I cannot align 3 doors perfectly because it's bending to one side, and it's because door weight. Any idea how to fix this? Also if I open the 3 doors the furniture comes to front, so it's very dangerous.
Mine does not hold in balance.
You can fix it like this ruclips.net/video/1E19gE7U7Ng/видео.html or ruclips.net/video/4WSDvTjTDnk/видео.html
Mala explicación, la parte más difícil no lo explica, es la parte donde se mete la pieza del fondo que va con posición, no son defectuosos.
I'm blocked at 2:20 totally impossible to put that sh*it in... I'm going crazy
Same bro, it keeps falling out of one side or the other. No idea what to do
@@abcmsaj I finally managed to do it. I think that I just didn't put it precisely the first time. There is a channel on both sides of the back panel that has to fit precisely with the side panels. You have to find the right spot. If you are forcing to put the back panel too much inside the channel of the side panels, it won't fit well.
@@Marco1502 thank you, I've ripped the thing now because I lifted the frame up while it was in and it tore... I'll try and get it replaced by customer services but I'll give it another go with the broken piece tomorrow! I was doing it on hardwood floor too so it was sliding around everywhere, so will maybe do it on carpet
@@Marco1502 Sorted today... Super glued the broken back piece, put the frame on carpet, it slid in with no issues! Was just having awful luck with it last night - thanks for your comment again
Is it required to screw it to the wall?
it would be better
ruclips.net/video/3os0zmXY4-w/видео.html
Personnaly i didn't screw it to the wall
@@Keitex 😱 i wasn't ready for that video. i got the thin one and added doors to it and i'm trying to figure out how to solve the tipping problem as i'm not allowed to drill the wall in this flat and i can barely open the door without it wanting to fall forward. also my drill isn't strong enough to handle the concrete 😭