Это видео недоступно.
Сожалеем об этом.
Inmotion V12 Review: Speed, nimbleness, and the cut-out
HTML-код
- Опубликовано: 9 апр 2022
- Enjoy the video!
Follow me on / petrakarunia
Music
Phoenix by Netrum & Halvorsen • Netrum & Halvorsen - P...
So Funky by NIVIRO • NIVIRO - So Funky | Fu...
Fast Evil by Infraction inaudio.org/track/fast-evil-c...
As I sit in hospital with a dislocated hip from EV accident - please wear elbow, hip, shoulder, high top sneaker ankle protection, especially when you are off to do a speed test on a wheel you suspect of cut-off. You can always replace the wheel, but you only get one body.
you're totally right. I really appreciate it, buddy
Absolutely, I used to be guilty of not fully gearing up. even been as foolish as to smack my my 16x to tilt back barefoot with nothing but shorts and t-shirt in the past. have thin smartened up and I now fully Gear Up no matter what. Hope you make a full recovery quickly and get back out there
Hope you get well very soon. Although a dislocated hip is very serious. And can nag you for a long time. I ride motor and had several accidents. A dislocated hip aswell, broken bones. But also broke four of my spines. Had to stay in a speccially made harness for 6 months.
Strenghten your muscles around your hip with very precise exercise. But build this up very slow. Cause it takes a few weeks for a lot of muscle loss. And this can keep you in a loop of pain. I hope that you are lucky and not experience the pain for so long as i had.
Try to start walking and try to be aware how you walk. And also try not to adjust the way you put out your legs in front of you by the pain. And try to stretch out your legs while walking as long as you can. Otherwise your muscles will shorten. Listen to the pain and do not listen to the pain. It is a contradiction but a ballarina has to endure a lot while setting her goal. And watch out with certain painkillers like the opium based ones. Like Oxycodone or Oxycontin. Pain is better.
Take good care. Wait, heal and when you can again walk and build your body up again. A few weeks later start doing exercises.
@@keesverhagen9227 Thank you much for kind wishes and advice. Have been doing prescribed exercises, now out of hospital, and taking very minimal pain meds. As soon as allowed by doctors to exceed "toe down only" weight on the injured side foot, I will begin walking, very consciously with regard to form. Am no stranger to pain and, as you say, am riding the line between pushing past comfort and exacerbating the injury. People ask if I will ride EV's again. (I do e-scooter, e-bike and EUC, all depending on required range and weather). While I will have to do a "cost benefit analysis", weighing the actual risk as my condition improves, I also do have in mind that people who have been injured in car accidents seldom swear off of ever riding in a car again. Everything is a calculated risk. I use EV's to commute, real practical usage, so unless there is a new and outstanding risk of hurting myself especially badly as compared to before, I hope and expect to ride again. (It's always the most fun part of my day....!). Cheers, and thank you so much :-)
Aside from not falling is there any good way to fall that you would have changed? Hands out? Rolled to the side? Just leaned back as much as possible? I know we only get a half second to think about it but in while racing motorcycles they say if you know you'll crash loosen up and try to slide on your back. Is it the same?
Amazing footage and cutting! Great video!
Great editing. Glad your V12 is back up and running!!
Thank you!
That intro was amazing! Please do an intro like that more often!:))
I just got my V12 HT yesterday, and yes, the Torque is crazy compare with my kingsong S18, the first time I ride the V12 HT, it made a turn, but left me behind, I fell at the first turn lol. this is something the KSS18 can not do, I am so excited, I am going out for another ride now. great video bro!!!
riding so fast without kuji pads is so impressive
Excellent video. I'm thinking about swapping my old 16x for a v12. A hug from Brazil.
I agree...rode every day...had an accident (skateboard park) broke 3 bones in the ankle..had rods put in and now i have plates and screws in my right foot! I had all the protective gear on, but I would highly recommend that you get good ankle support!!!!!! It’s been 6 weeks after my surgery and i still can barley stand on my foot. Starting PT as of this week, so hopefully I’ll ge better soon! After i heal up, I’m looking forward to ride again. Just got the V12ht, but didn’t even open the box yet. So please, wear good ankle support shoes!!!!!!!!
Thank you for your demonstration.
This is a really well-made video!
Thank you!
Nah ketemu juga yang review V12 versi jalanan Indonesia. Mantap Bro.
great intro, dope jacket.
Great intro vibes there! Subbed with all of my youtube accounts! Sad thing about the mosfets if you resolder with a bigger capacity ones you void your warranty :(
From TIMES SQUARE NEW YORK CITY !!! YOU GO GUY 1 LOVE & PEACE
Very good. Thanks 👍
Great vid. Makes me really miss riding my v12.
What happened with your?
@@user-iy3tt2pi2j nothing yet but I don’t want to risk riding it with the 100v mosfets. Waiting for a fix.
@@esk8world hope we will get it soon
@@esk8world good move!
Keren bang Petra 👍
Time to upgrade to V12 HT! Its amazing! beefy tyres and insane acceleration.
would you go with this or the RS if you had to choose? how is the v12 at tackling hills?
Hey can you tell me where you get your replacement tire. I want to change the tire treading
This is a little off topic but I'd really like your opinion on the safety of the RSHT, i purchased mine in April and although I've had NO problems with it i have anxiety about the safety of having it due to Begodes history of wheels and FIRE! I'm thinking of returning it and investing in inmotion v12 for ease of mind. What are your thoughts my friend! Love your content thank you!
Crazy speed!!
Mantap mas
What tire pressure do you run on the bumpy roads. I find the stock tire very bouncy.
Great music
Good riding, what psi are you riding and your weight
thanks for posting yourself riding on bumpy/broken roads!! this is EXACTLY what I was looking for. Someone using the V12 on crappy roads. I'm having a really hard time between V11 and V12. I want the speed of the V12 but I also want to the suspension of the V11. 😭 How fast on average do you think you were going on the bumpy rode part of the video?
I have this same dilemma. What euc have you picked?
@@talkingpig3322 Veteran Patton?
From TIMES SQUARE NEW YORK CITY YOU GO GUY 1 LOVE & PEACE
Perhaps it would be useful to add on the text that V12 was then upgraded with a new control board as V12HS. 😉 Did you have the chance to try the V12HT?
my v12 was the very first batch released in China, within 1500km the wheel was sent back to factory twice, first time they changed the main board, second they changed the drive board. you have to keep an eye on the motor temperature as well as the board temperature on this wheel if you do more than 30km on a single range, or climbing up hill for over 5miles on a single run. mine got up to 90°c on one occasion and damaged the temperature reading component on the drive board, when it dose, the wheel will say overload, please get off
Have you had anymore cutouts? Thanks
Good video, I hope you make some more. I bought a V12 last December, as my first wheel. Then a week later, the cutout issue surfaced. I don't understand how Inmotion made such a rookie mistake by putting 100v mosfets into a 100v wheel. Especially when other EUC manufacturers have been putting higher volt mosfets in theirs wheels for quite some time.
Yes, true. It's really disappointing, since one of the strongest reason of choosing Inmotion wheels is the quality they offer.
Will the new MOSFETs they’re shipping be over 100v MOSFETs? Wouldn’t that solve the issue for good?
@@visiop1 That's right. But it shouldn't of happened in the first place. Hopefully Inmotion will learn from this fiasco.
@@terrenceclark763 You’re 100% right, it could’ve turned out deadly for many. It definitely has given pause to more than one or two potential buyers like me. They can’t cut corners in smth that might affect the safety of their customers.
@@visiop1 Yes, all V12s shipped from April will have 120v-rated mosfets. Many people believe that it will solve the issue, including me.
Wanted to buy the V12. Now i am not so sure. I will wait and see what the 120 V mobo will bring. And when this takes to long then i choose another option. Cause i do not want to drop at a high speed so suddenly. Although i will use proper gear. The chance of really hurting yourself is still very high. And there is no chance in getting Immotion accountable for the accident. There is also a high chance that others can get hurt in traffic.
Nice video for Euc, may I ask the brand of your helmet?
It is TSG Pass
Question, Is that red jacket that you are wearing a protective Jacket or not and if so, Where did you get it from, what brand??
It is not a protective jacket. It's a local brand here in Indonesia called Kremlin
Very nice video. So the new replacement board still has mosfets rated only for 100v?
Unfortunately yes
@@Petranodon that's unfortunate.
@@wheelhughman Inmotion just told me that all V12s produced since April will have 120V-rated mosfets. I assume it also applies for the board replacement
@@Petranodon man that is awesome news. Thanks for following up.
It would be good if they put out an official statement. Everyone is weary about it, and it impacts sales.
I read somewhere the INMOTION has stated the replacement boards will be the same as the boards in the V12 HT and the V12HS produced after April 2022. These will use the 120volt mosfets.
30-40 is probably my sweet spot I'm guessing (I'm new). Maybe even lower for the majority of it
Bisa jumping jumping ga ini mas dibandingkan kingsong?
👍👍
Lets help Petranodon get SUBS!! This video was made very well!
Thanks, buddy!
Which pedal setting do you prefer? Hear some people say high is where its at
It depends on the riding style of the riders. Since I love maneuver, I love the high pedal clearance!
I have mine on the high pedal setting, I never scrape pedals, but it does wobble pretty good because of that.
My V12 is running great. No cut-outs yet, but I keep it in commuting mode. Were you in off road when you cut out? Looks like crazy traffic where you live, but beautiful jungles.
My riding style is quite aggressive, but the cut-out happened when the wheel hit a speed bump when ridden in a super slow speed. The same pattern is experienced by several other V12 riders
@@Petranodon What I meant , were you in off rode mode or commuting mode, when you cut out?
@@Petranodon you didn't answer his question
Sorry I read the question too fast, I am in off-road mode all the time
@@Petranodon aw ok, That's some interesting point that he was making That's some interesting point that he was making
Get that elbow armor...please.
No elbow pads???
So bottomline, do you prefer the V12 or the RSt? I would think the RS being almost a 20" tire with the knobby will be more comfortable & with more torque, perhaps better offroad. By offroad I mean gnarly technical mtb single tracks. Ofcos the 16" V12 should be more nimble. Personally I chose the RSt over the V12 & no regrets. I swapped the stock CST streets for a Duro hf307 & lov how it rides both on asphalt & dirt. Since you have both, I'm curious about your personal views.
If I can only have one, and the option is only RS HT and V12, I would pick the V12, because I will need a wheel that will work to be ridden for my daily mobility. The V12 has enough range for it, more-than-enough speed for it, comfortable, and I have confidence to ride it in rain. But if I could have three wheels, two of them need to be the V12 and RS HT, and another one is a long-ranged wheel. The RS HT has a crazy torque and weights less than any other high-performance wheels. So I badly need this wheel.
@@Petranodon Ya that's what thought. The V12 might be the best allrounder in its class but IMO 16" is just a bit too small with too little tire choices. I ride wheels mainly for recreation & rain isn't much of a thing where I am (snow otoh 🥶). Lov lov riding the RSt as its like a sportbike on the bikepaths & a enduro on dirt. Thanks for the review & the honesty. Hope to see more of your vids & ride safe🤘
I was going to get a RS 19 high speed from ewheels a while ago. But they told me they suspended sales cuz of the screw holds breaking off on the inner shells and they weren't going to start selling them again until they got sent improved shells
@@noelleonard2498 I got my RSt last mth & while I have no issues with the wheel, I do wish it was better built better fit better finish. All that said, its the funnest wheel I've ever ridden. Its the fastest quickest wheel
@@scottsum1319 completely agree. RSt is my most fun wheel too!
Is it cheaper to buy and for repairs if needed over there??
The price is relatively similar as any other dealers in other countries
@@Petranodon Okay, Thanks so the same 2300 which is what it would cost in the US
for safty sound wave activated if you riding
Doing a speed test on a busy road is not very smart ... you should have found somewhere quieter to do this.
Hey man. When a V12 ht review/comparison with hs?
My V12 HT will arrive in 2 months, it will take time.
@@Petranodon A store here in Europe says that, they will receive it in July. Waiting for a comparison of these two V12-s from you.
I couldn't watch all of this....I just stared at those bare elbow went "nope".
When I ride, I have no bare skin showing.
I have 16x maybe i ahould have waited for this thing but im ok.
I don't Iike how you can barely see the break lights.
Bang. Klw cuma bs milih pake satu wheel dlm dua tahun, mending v11 atau 12?
Dua duanya juga bisa, tergantung dari penggunaanya mau buat apa?
@@Petranodon commuting bang. Yg bs diajak k kantor dan bs naik kereta atau mrt. Apakah suspensi bener2 memberi efek beda? Atau power nya v12 lbh menggoda?
@@user-iy3tt2pi2j kalau jalanannya mostly bagus, lbh baik yg non-suspensi, suspension wheel akan berpotensi buat wheelnya wobble ketika high speed. Tapi kalau mostly jelek jalannya, better V11
@@Petranodon siaap. Makasi masukannya bang. Oiya, satu lg bang soal v12. Shall I wait for tha HT or get the available V12? .. saya baru mau mulai bang 🙏
@@user-iy3tt2pi2j kalau mau V12 HS, beli V12 HS yg diproduksi oleh pabriknya yg bulan April ke atas. Krena ini mosfetnya udah yg di-design untuk 120V, bukan yg 100V. Harusnya skrg blm ada yg jual di Indo, tapi nanti di sekitar Mei Juni bakal ada harusnya.
The new mosfets are rated for over 100v
But the v12 is still 100.8v isn't it?
@@matf4505 The V12 remains 100.8V, but what @Noel Leonard says is the latest mosfet capacity has a larger capacity.
@@matf4505 Inmotion informed me that all the V12s produced since April will have 120V-rated mosfets
Oh poor ChoochTech on the V12HT. Rider down…
Lost a bit of respect for Chooch because he clearly and admittedly rode the beeps past the max and then blamed the wheel. Also hated on the same screen that he loved when it was the original V12. I know he was angry in the moment, so I'm soft in my judgement, but proves we have to be careful about what to believe from reviewers.
@@bkanegson I hardly watch his videos but I'm glad he's safe. But definitely rider error.
Still happier I went with the EXN
EXN is a great wheel too!
I heard the eagle voice of KS20 😄
You mean the sound of a toolbox getting thrown down a flight of stairs? 😂
@@noelleonard2498 😂
Damn for cut outs that can kill you this price is ridiculous
Are you on a highway???
You can believe your eyes
You need a license, plates, and insurance if you go faster than 40km/h...
2:17 dude get a bigger seize helmet, your face looks smoosh xD
I don't trust inmotion after the switched mosfets
I wouldn't even trust riding them in highway.
Imagine your wheel Cut out and your body is on the Ground while the Cars don't see you and you get Run over because of a Cut out.
Fu*k that
I will just ride on the Shoulders
Actually we riders imagine the danger all the time. If you see us still riding this, it's just because we're crazy
Almost happened to me, luckily the driver stopped before crushing my head with the tire
@@Petranodon "I am not in danger Skyler, I am the danger" loll
I would never trust any wheel made by InMotion. Unreliable cheap batteries that don't last, no easy way to replace them, and their design for the V12 take a ton of damage when you inevitably fall. The display cracks and wheel falls apart too easily
Still better assembly than any other wheels. True about the sub par quality case and batteries, but what do you expect, it is made of Chinium. Always expect them to fail and prepare for it.
@@cyberglider that's a fucked up way to speak about creations bro. Do better. Stop being this type of human.
Talking to quiet, music to loud and doesn't provide any info in a review. This style of editing is used a lot but at least for me does not make for an enjoyable video to watch. Made it about 1/2 way through then got tired of adjusting the volume. Maybe talk your review over your footage and have background music to fill in the quiet moments.
Thanks for the feedback. Really appreciate it dude!