My car car new turbos new intercooler new charge pipe and vanos solenoids plus boost solenoids could it be tmap sensor or vacuum lines I’m at 103k miles
Correct 3.5mm inner diameter hose, outer diameter will be larger than 4mm due to the thickness of the hose. You'll need about 15' worth, amazon has many options available :)
I had no idea that oil cap could leak. LOL now I know why I keep seeing oil around there. Thank you.
Good video. Thanks for taking the time to help others!
Glad it was helpful 👍
Hey man thx for the video.
My car car new turbos new intercooler new charge pipe and vanos solenoids plus boost solenoids could it be tmap sensor or vacuum lines I’m at 103k miles
start tracing your vacuum lines, that's where i would start first and rule it out
Damn I hope mines this simple lol I very minor waste gate rattle too only hear it when it starts but I keep getting 30ff
Good luck, hopefully something easy
What vaccum tubing hose did you use from Amazon? I can't really find anything with a 3.5mm ID / 4mm OD
i used bulk silicone hose from amazon: amzn.to/3oEBYfP
How many feet of this tubing did you use ? This kit has only 5 feet of it. Thanks !
3.5mm ID line (inner diameter) x 4mm outer diameter?
Correct 3.5mm inner diameter hose, outer diameter will be larger than 4mm due to the thickness of the hose.
You'll need about 15' worth, amazon has many options available :)
Compro meus olhos sorriem
Why would I only be boosting 8psi if everything works with jb4 on map 5
do you have any codes stored? check to see that first. might need to reload map?