Bravo Davide!! As someone who started loooong ago to build vertical plotters to make big installations (up to 5m x 5m with a single plotter), I am _very_ impressed by your clever idea of the moving rubber bands. Kudos to you and keep up the good work! Antonio
this is the most awesome polar plotter I have seen in years. I would like to mount it on a thin wooden frame, to try drawing on t-shirts and other surfaces.
great job man. Keep up the good work, it is helping a lot of people live a better life and that will lead you to great success. Keep up the great work, you're going to go far.
Thank you so much for sharing this, have been trying to solve this for more than a year ! I wanted to ask though, what type of cord or pulley surface reduces slippage ?
yo bro I'm making this masterpiece for my thesis. I have already regretted a thousand times that I chose this, but there is no turning back. Is it possible to somehow contact you (or someone who has already collected it) for any questions?
It means that the control of the small servo (yellow) is done through the pin originally intended for the coolant of a regular CNC. And then the current (red/brown) is 5v.
I'm trying to remake this, all is correct but when we start draw vector, then an error shows " Line is not on the page. Skipping it ". can you help me out of this
Bravo Davide!!
As someone who started loooong ago to build vertical plotters to make big installations (up to 5m x 5m with a single plotter), I am _very_ impressed by your clever idea of the moving rubber bands.
Kudos to you and keep up the good work!
Antonio
hi is there a possibility of doing one without a CNC shield
I am doing it for a school project
@@MRMado-xh7dd yes ! You can always connect motor drivers ( you can't Not have motor drivers ) directly on the right pins of the Arduino.
this is the most awesome polar plotter I have seen in years. I would like to mount it on a thin wooden frame, to try drawing on t-shirts and other surfaces.
great job man. Keep up the good work, it is helping a lot of people live a better life and that will lead you to great success. Keep up the great work, you're going to go far.
That idea is fantastic! I modified my DIY-Makelangelo accordingly and I am overwhelmed. Thank you very much for sharing!
if world is going to end and we have to find ways to save it
Davide is the guy
Really neat ideas and execution.
Thank you so much for sharing this, have been trying to solve this for more than a year ! I wanted to ask though, what type of cord or pulley surface reduces slippage ?
wow nice project Thank you for share this
Pretty cool! Thank you for your sharing.
You rock big time young man !
I have a problem related to this project how can I contact you??
Very beautiful machine!
Can you give all the materials used?
yo bro I'm making this masterpiece for my thesis. I have already regretted a thousand times that I chose this, but there is no turning back. Is it possible to somehow contact you (or someone who has already collected it) for any questions?
Did you make it? If so, how?
Is this basically a core xy gantry? Could it work at high speeds?
Wow man..!! loved it.!
que amperaje configuras en los controladores de la shield para los motores
Please can you tell me the exact objects necessary to built this robot
I watched your video as you did and did the same but there is no response from the motor, I used the latest devices for this.
hey bro also tell is these numbers correct
pulley-2
rubber band pulley-3
stepper mount-2
wire holder-2
pen holder -1
gondola-1
holes template=1
is anything else need (3d models)
Yes, you need only them
@@DAZprojects bro ac adapter is used in this at which part??
@@adithyanmnair5899 i used a 12v 1a psu
@@DAZprojects bro it's showing polargraph not connected
Thank you very much for this video , Can i add a laser for it ?
This is VERY good
Bravissimo!!!!ottimo lavoro!!!
Cool bro can i make big bed size plotter with these idea
You can scale it to any size you want, but i suggest you to use gravity instead of a rubber band if you go a lot bigger
@@DAZprojects thanks bro
And bro I make big size plotter then I have to change the motors or not
Nice job!
can you use Arduino Uno r3 and L293D as drivers?
Do you have a parts list so I know what to buy?
Unfortunately no
What other name in Perú does the S to Cool GND to GND 5v to 5v have?
Nice project, but have you got any idea about the SIMPLEST cnc 3D printer?
hi, a question what is the "s to coolen gnd to gnd 5v to 5v" ?
It means that the control of the small servo (yellow) is done through the pin originally intended for the coolant of a regular CNC. And then the current (red/brown) is 5v.
Please tell me the length of the rope and elastic
esta chido el proyecto, pero no tengo una impresora 3d :c.
What math do you need to do this? How do I fond the right math to apply? Trying to do this as well
Wow Awsome!
I'm trying to remake this, all is correct but when we start draw vector, then an error shows " Line is not on the page. Skipping it ". can you help me out of this
Hi, do you still have the config file? the linked site is not opening
Hi. I love the vídeo. Do you have the code of this? I really need it. Thx
It operates very similar to a MaslowNC which is open source
The adapter you use for this should have a mark (A).
So does it work after that?
Does it fix it then?
The MaslowCNC operates upon the same principle
bro where will i get to buy this 3d models
They are free
@@DAZprojects from where do i buy them
cant i buy models i dont have 3d printer
@@adithyanmnair5899 you can order them online, there are some companies that will 3d print them for you, but i don't know which they are
@@DAZprojects bro please tell how did u used that adapter in connection
Hey, the project is really amazing. If you wish to feature your project (no money involved), kindly contact us.
I'll be happy to see my project in one of your future videos
How many subs do you have??
@@DAZprojects Hey, the video featuring your project has been published on our channel. Kindly check it out.
Porque al mostrar la configuración aceleras el vídeo? Al punto que es imposible seguirlo.
I will make a second video where i will explain in details how to install the software and how to use this CNC plotter
I watched your video as you did and did the same but there is no response from the motor, I used the latest devices for this.
Yes
Do you fix it?
Yes
How you fix it
@@GayanJayawardane-ld4ob how u fixed it