2017 C300 GFB Blow Off Valve
HTML-код
- Опубликовано: 28 июн 2024
- The sound we all love, now in the 2017 Mercedes C300 W205. We installed the GFB blow off valve which vents to atmosphere creating that loud PSHHH sound! Let us know what you think in the comments!
Авто/Мото
Fantastic video!!
Dope!
Mine is Stage2 with OEM DV Valve and when i run with full boost, after sometime the boost stops and the car run like a 2.0 aspirated. I have to upgrade the DV?
Hi what size T socket was used for Installation?
one thing...gloves, good video
Just ordered mine. Got a 2015 with MST cold air intake and muffler delete. Can't wait to hear it !
how u like the mst intake? Between that and Armaspeed
@@angel-1876I have mst intake for year and half , haven’t had a problem sounds goods and car responds on touch
@@spliffertons25would you prefer the mst over bms intakes?
@@6ixgod330 I can’t speak on bms Intake because I’ve never used one
But this mst intake is solid !
Not one problem so far, & throttle response is nice!
Just got the mst very happy
Which one is this?
oh wow the pour15 on my hands really makes this vid😅😄
I can’t seem to take off a part of the intake tube even though the plastic is warm any ideas to help? Thank you
Use flat tooth screw driver between the clips
I have a 2018 w205 do you have bov for this year and if this is your only engine mod is it bad for the engine long term since everything else is stock?
Your W205 uses the same part number T9358. Keep in mind the GFB DV+ improves performance and reliability not the other way around. Its also going to allow for HIGHER boost pressure once tuned. It replaces the factory plastic bits for a stronger CNC aluminum body with better valving. If you are going to keep it stock you wont see much performance gains aside from on-off throttle response. You also will not see reliability issues unless you fail to maintain the valve when needed. This customer got a custom tune afterwards to increase power and take advantage of the new diverter + exhaust + BMC filters + sprint booster so in his case it makes a difference.
I know that front splitter is from Maxton Designs … but which exact one is that ? And do you know if it will fit a CLA 250 2015 …
it wont fit the CLA, but racing bees has a dope front splitter for the CLA...racingbees.com/
Where did you buy that carbon fiber lip? Looks really nice
This 👆
Maxton Design
I can’t seem to get off that little connector that’s connected from the engine to the diverter valve it has a white clip
Your connectors might be slightly different, try prying up the c-clip and pulling.
followed the steps and installed mine but for some reason mine didn’t fit completely where I could simply hold it without falling like in 4:53 with all the parts within it..idk if this is an issue?
Check and make sure the VTA and the Mercedes OEM housing are fastened correctly. Check the part number on the GFB box and make sure you aren't installing the T-9358 on a 2019+ C-Class or a diesel C-Class because this engine has a different housing from the one we show in the video. If you are still having issues call the tech team at GFB they can help troubleshoot as well.
@@Jrponline 2017 C-300 4matic…I got the T9458
I have a E300 with the same engine. Its work?
It will work. If you need more info check out all the available applications this BOV fits on the GFB website; gfb.com.au/products/blow-off-and-diverter-valves/dv-plus/dv-t9388-diverter-valve-for-mercedes-applications/
Def made my Mercedes faster above 3k RPM
Which one is this?
facts.
My brother, where can I get this piece from?
If you are in Canada we have it here www.jrponline.com If you are in another part of the world then gfb.com.au/
Where did you get that lip ?
maxton designs
whats better bms or mst intake
MST intake especially it’s covered don’t use BMS a lot of heat soak
Does it void warranty and how long does this lasy
When properly serviced they last the lifetime of the vehicle. Whether or not this voids your warranty comes down to how your dealer views it. We suggest having that discussion.
@@ryansullivan9985 disassemble it and make sure O-rings are in good condition and lubed, make sure the spring still has tension as well. If not order a service kit and put new springs and O-rings in your GFB valve.
@@Jrponline how often would you say to service it ?
Hello friend, how can I get the same?
gfb.com.au/
Will this work on a 2019 C300?
Nope! 2019 models got the newer M260/M264 engines and the turbo on these is different.
@@Jrponline do they make one for the 2019 at all
@@FlowsVlog not yet ... they may come out with it eventually.
Do you know if they came out for the 2019?
Hi Does it fit on w213 e300
It does fit W213 E class models with the M270 engine yes.
I am from Saudi Arabia and I want to order this piece from your site
Part No: T9458 Is this the part number?
@@haithamal-suwayegh5416 yes that is the part number. You will need to order from Australia since we cannot ship to you here in Canada. contact GFB here; gfb.com.au/contact-us/general-enquiry/
I'm confused, I don't know what the correct part number is. Is this one? T9358 or T9458 for w213 e300
Mine doesn’t sound this loud
U got non blow off version
way to go and just void all the mercedes warrenty there bud lmao
We void warranties
Mercedes only has 4 years warranty from factory
The new 2.0 turbo engine has pressure release setup. If you follow the intake u will see just before the throttle a pressure release tube routs back to intake before turbo which is electronically controlled. Now pshhhh sound many people do not like. If u r car enthusiastic or teen or young to show off yea but many family people do not like pshhh sound every time they press gas...imagin psshhhh psshhhh....driving in community...have fun
Pshhhh is good
Why were you even here?