How to Replace Wheel Bearing 13-19 Nissan Sentra
HTML-код
- Опубликовано: 8 сен 2024
- In today's video I'll show you how to remove and install a wheel bearing, or wheel hub assembly for your Nissan Sentra, this should work for sentra's between 2013 and 2019. The symptoms you'll experience with a bad wheel hub assembly or wheel bearing is like an airplane noise when going straight down the road, and a grinding noise while going straight down the road. If it's only when you hit the brakes, that's more likely a brake issue and not your wheel bearing. also it's common for the noise to go away when turning left or right, that's another hint that it's a bad wheel bearing. this wheel hub assembly also fits a Chevrolet City Express, Nissan Leaf, and Nissan nv200, so the replacement procedure for these vehicles may be very similar as well.
the wheel bearing you'll need for today...
amzn.to/2UY9jDX
axle nut sockets...
amzn.to/3fEBkbo
Other stuff I commonly use in these videos…
Milwaukee Ratchet: amzn.to/2Fzf839
Regular Ratchet: amzn.to/2FxYsZO
Milwukee Impact: amzn.to/2X5c5W2
Socket Set: amzn.to/2IOTERA
Socket Extension: amzn.to/2XxCIaI
Swivel: amzn.to/3dYJieE
Floor Jack: amzn.to/2LmGM7d
Jack Stands: amzn.to/2XwcDbX
Wheel Chock: amzn.to/2J6Sjog
Permatex Rtv/Silicone: amzn.to/2Qv6aJK
One of the things to add here in the comments, be sure to use axle grease before sliding it back on and always use a new cotter pin after tightening the axle bolt, both are cheap and easy to get from any auto store.
I gotta change mine this weekend. I used rock auto to get the wheel hubs. Gonna change the brakes and rotors too while I'm at it lmfao
"Gutten Tight" is not good enough for bearings or seals, especially considering that the hub mounts your wheel to the car.
Broke that sensor with the wheel hub dust cover
You explain very well thank you.
Love your video
Thanks man.
Torque those correctly people.
do you need an alignment after?
thnks
Mine has play at the 3/9 positions/side to side. That would still be wheel bearing eh?
Tierod doesn’t move when I am shaking the tire either
was it bearing?
@@FPSAnarchy no, I took another look. Turned out to be tyrod
@@nombr did u replace the entire tierod? or just tierod end? i am having same issue :D
@@FPSAnarchy entire thing, I had my old man help me. Was a huge pain lol
@@nombr how long it take?
How to by rear spindle bearing nissan sentra Aidan 2008 model
Man thinks hes on google lmao
Really? Torquing down the axle nut with an impact? You're the type of person to say the wheel bearing was bad when it fails in 20 miles. Also any bolt above a bearing gets torqued to specs
DISLIKED
😂🤣😂🤣