How to program a Nissan Frontier remote key fob 1998 - 2020
HTML-код
- Опубликовано: 9 фев 2025
- An easy to follow video on how to program a remote key fob for a 1998 - 2020 Nissan Frontier.
More free keyless entry programming instructions available at www.ProgramYour...
These Instructions are for vehicles WITHOUT push button start:
1. Close and lock all doors with the driver’s side power lock/unlock switch.
2. Insert key into ignition and remove it from the ignition key cylinder at least six times within 10 seconds. Your Hazard Lamps will flash if you have performed this step successfully. NOTE: Withdraw key completely from ignition cylinder each time. If this procedure is performed too fast, system will not enter programming mode.
3. Insert key into the ignition cylinder and turn to the ACC position.
4. Within 5 seconds, push ANY button on the remote transmitter. Your Hazard Lamps should flash. NOTE: Do not press the button more than one time in the above step. If the button is pressed more than one time, the programming procedure will not be successful.
5. If there are any remaining transmitters (including the old ones), unlock then lock all doors using the driver’s side power lock/unlock switch and within 5 seconds, push ANY button on the next remote. Your Hazard Lamps should flash. Repeat this step for each transmitter (including any existing transmitters). *IF YOU ONLY HAVE ONE REMOTE, skip this step*
6. Turn the key to the OFF position, remove keys from the ignition, unlock doors using the driver’s side power lock/unlock switch and open the driver side door.
Just programmed a new fob for my 63 year old mother and saved her 100+ bucks! Thank you so much!
You're Welcome! Glad it helped
This video saved me $250. Thank you sir.
You're Welcome! Glad it helped
It worked perfectly with 1999 Frontier you save me lot a money. Thanks HRG
You're Welcome!
Thank You! Worked Flawless on my 2016 Frontier! Made 2 extra FOBs with key built in. Original is FOB and key 2 separate pieces.
You're Welcome! Glad it helped
Soooo simple..2 remotes programed in 5 minutes 😁👍 Huge Thank You
You're Welcome! Glad it helped
Couldn't program a 433mhz remote to mine but the procedure was spot on for my truck!
Thought for sure it couldn’t be this easy, Worked first try on my 08 Frontier King Cab!! Thank you!!
You're Welcome!
You just saved me $180! Thanks!
Awesome! You're Welcome!
It's magic! Worked a charm on my old fob that stopped working.
Nice!
Thanks
You're Welcome!
Thank you for posting this. You just saved me a ton of money!
You're Welcome!
Thank you sir. This video was absolutely helpful and most of all, it saved me money!
You're Welcome!
Excellent video! Worked perfectly the first go around.
Thank you!
You're Welcome! Glad it helped
Excellent, straight forward video.
Thanks!
You're Welcome! Glad it helped
It worked perfectly with 2019 Frontier. Thanks
You're welcome!
H guy
Thank you. Excellent video! Explained perfectly.
Thanks! Glad it helped
Thank you. This worked perfectly.
You're welcome! I'm happy it helped.
Omg... Thank You. It was the easiest thing...!!
You're Welcome! Glad it helped
Worked first time. thank you.
You're Welcome!
Thanks it worked perfectly on my 2000 crew Nissan Frontier
You're Welcome!
Awesome video! Thank you!
You're Welcome!
Thanks, took me 30secs to do it!!!
2004 Frontier xe crew cab.
You're Welcome!
Hey Jig, I also have a 2004 nissan frontier xe crew cab but my truck can't lock the doors without the key in the ignition
Worked well on my 2004 Frontier thank you!
You're welcome!
You are the best !!! Thanks
You're welcome!
YES!! Worked for a 2018 Nissan Frontier. Thank you
You're Welcome! glad it helped
Super video de verdad me ayudó y es muy fácil de seguir.
It worked for my 2008 Frontier!
Great!
WOW... Crazy.! WHO Thinks up this stuff?? Well, I'm about to replace my key fob battery (tomorrow), we'll see if it just works, or if I have to Reprogram it. [2001 Nissan Frontier SE] Thank You for the Video, nice and to the point!
Please let me know if it does I have a Nissan frontier 2010 pickup crew 😭 I need to know if it does work
Thank you, This worked for my 2018 Frontier
You're Welcome!
I have a question, on my 2016 Nissan Frontier, from your video, you programmed the Key Fob, what about the key itself, do they need to be programmed? or if you just cut a regular key, it will work?
The ignition key will need to be programmed by an Automotive Locksmith or dealership
Thank you so much!!! It worked just as you said. Frontier Crew Cab 2014.
Awesome! You’re Welcome!
Worked for 2014 Frontier. Thanks
Great! You're Welcome!
So my truck use to have a key fob but I can't lock the doors without power to the truck. What do I do?
Thank you so much you save me lot a money very easy
Great video! Clear, concise and it worked - both of our key fobs were restored to working order. Thank you!
Thanks! You're Welcome
Thank you so much. It worked!!!
You're welcome!
Great video, I have a Nissan Tiida 2004 model, I do the steps but my lights don't flash it just unlocks my doors, doesn't go into program mode. Please help
Unfortunately I do not have programming information on vehicles built for use outside of the U.S. market
It freakin' worked! Much thanks, sir! - Frontier '16
Awesome!
does this work for thos street market remotes that look different from the original? like those fobs with the lcd screens?
No - this is only for the factory style remotes
@@PYR-Auto Got it. Thanks for the reply
My 2020 Frontier SV doesn't have an ignition what canI still program a new remote if I have the original?
unfortunately, there is no manual way to program key fobs to the vehicles that do not have a push button start ignition
Hey, what is the process if you do have the push start button? I'm going through the comments now to see if you've already answered that
Awesome! Thank you so much
You're welcome!
Worked perfect! Thanks!
You're Welcome!
Thanks...it works!!
You're welcome!
It worked!! Thanks!
You're welcome!
Hey I got 2006 Nissan Xterra I did everything that you said I got a new and the old one. The old one had no problem being reprogrammed the new one responded with a click of a button and the hazard lights went on but when I finished all the steps the old one work but the new one didn't work even though it flashed saying it did where did I go wrong?
I'm not sure - It sounds like you are doing everything everything correctly. There may be an issue with the new remote
Hi, I tried my 2000 Nissan frontier but the hazards don’t flash, so I can’t program. What would be the reason my hazards don’t flash?
its possible your frontier does not have the factory remote option. You can verify that by calling a Toyota Dealership with your VIN number. Speak with their parts department and they can look up the original build sheet for the vehicle to see what options it has.
What if the hazard doesn’t turned on?
It works with a nissan frontier 2004 2.4lt xe model?
If it has the factory keyless entry remote option, then Yes. The best way to verify if your vehicle is set-up factory remotes is to get your VIN number and call a Nissan dealership and speak with their Parts Department. They can look up the original build sheet and see if you have the keyless entry remote option installed or not.
Yes it works
When in and out key no flash. Lights. Help me
What if the flashers never come on?
I dont have a fob just the key . does this key have a chip in it or not thanks
2014 Nissan Frontier S Crew Cab Pickup 4-Door 2.5L 2488CC 152Cu. In. l4 GAS DOHC Naturally Aspirated.
Yes, the key does have a chip(transponder) in it. Unfortunately, there is no manual way to program the key.
How do you wipe remotes and reset the security system. I suspect mine was tampered with.
Not sure
Bro, my hazard light don't flash on after the 6 or 7 times or more on a 2018 Nissan frontier
Try varying the speed in which you are inserting and removing the key (try faster if that doesn't work try slower ) some vehicles are more sensitive than others. In between attempts remove the key and open and close the drivers door a couple times to "reset" before trying again. keep inserting the key until the hazards flash or 10 seconds have passed, which ever comes first.
Thank you, sir. Very good
Thanks!
My Nissan frontier has no power locks. How do I reprogram my key fob with basic locks?
If the frontier does not have power locks then it will not have the factory key fob option
How long do I need to wait before programming another one cuz I tried it after and I couldn't get the flashing lights again?
You should be able to do it right away. Try opening and closing your drivers door a couple of times in between to "reset" before trying again.
I am attempting to program my 2017 Nissan Frontier. I get through all the steps (I press the button on the new fob and the hazards come on, I take the key out, press unlock, and then open the door) but the fob doesn't work. Anyone else having this issue?
I didn't work on nissan navara.!? Is there a different method?
These instruction will only work on vehicles built for the US market - I don't have any programming information for a Navara
I didn't work for me idk why? I'm having to crawl in from the passenger side! Sux! I mean you can hear the locks working when I hit the buttons but driver door won't open 2001 frontier frontier
Mine doesn't have autolock switch does it still work ?
02 frontier
No, it wont
Thanks you
You're Welcome!
We don't program for computer right? Just doing same this?
sorry I'm not sure you what mean?
Program Your Remote
Because I did it same your video but it doesn't work. Can you help me do it?
Can you help me do program remote key for nissan Frontier 2016?
It may take several tries, some vehicles are more sensitive than others when it comes to the speed in which you do the steps, most people tend to go to slow. Also, between attempts make sure to remove the key from the ignition and open and close the drivers door a few times to "reset" before trying again.
Unfortunately it doesn’t work for my 2006 Nissan Navara in Australia.
Yeah unfortunately the programming is usually different on vehicles sold outside of North America
Program Your Remote Thought that might be the case. It all started when I left my headlights on and flattened my battery. When I got the car restarted both fobs have decided not to work. Thanks for your reply.
You probably already did but if not, you should check your fuse box and make sure none of your fuses are blown. Hope you get it figured out!
I didn't work for me idk why? I'm having to crawl in from the passenger side! Sux! I mean you can hear the locks working when I hit the buttons but driver door won't open
Gotta have a chip key!!!
I lost my original car key. I have spare key which can open the door and steering wheel but it doesn't start the car because it doesn't have sensor like the lost one.
The key will need to be able to start and run the vehicle in order to program a new fob
Worked perfectly until I tried the second remote. Hazards flashed, as though it was programmed, but would not work. Repeated several times same result. The pair of FOB's were only $12 through Amazon so I ordered another pair. For now I have the one, and will add another when the order comes in. I can only assume it is a bad remote.
It definitely could be the remote but usually a vehicle will not respond to a bad remote. Did you try reversing the order in which you were programming them in to see how it responds, "bad " remote first?
Yes and I also tries it alone as well. It did seem strange that I got the flashing when I hit the any key on the remote but the remote never worked. Your procedure worked perfectly every time so it has to be the remote. I have two more on the way and that will tell me for sure
hopefully the new remotes will resolve the issue, Good Luck!
Do you need the old fob for this? Or can you just do it with a new one.
No, you can just use a new one.
what if you only have one remote to program ??
Then skip the step on programming an additional remote
works up until u press the button to sync it
Sounds like there may be an issue with the remote you are trying to use
what if i only have one remote. ?
The just skip programming the additional remote
i don't know why it doesn't function on my 2009 nissan frontier d40 crew cab LE. Our frontier came from Thailand and has only 3 buttons. Any inputs?
In many cases, the vehicles built for the U.S. market differ in programming from the vehicles built for the overseas market so I would guess that is the issue.
Saved
did not answer anything for me
how about in no power locl buttons? I have power locks on my nissan frontier 2003. i do NOT have a power lock/unlock button. its either manually or using key fob to lock unlock
The factory procedure is not possible without power locks
It worked...thanks!!
You're Welcome!
what if it doesn't have a power unlock button???
Then it will not have the factory keyless remote option