That is one intelligent way to do it, knowing myself I would have probably pulled all masking from the tape before slapping it on the car. But this seems like a smart way to do it. Good video.
HUGE SIDE NOTE: If you have a spoiler installed from the factory you may have fitment issues. Especially with the 17+ models. This and the TRD spoiler do NOT cover the oem holes! Please be aware and don’t make the mistake I did!!!
@@MS-wd7gp I don't know if you are still looking for one, but Verus Engineering just released a ducktail spoiler that covers the OEM holes in 17+ models. www.verus-engineering.com/shop/product/a0176a-carbon-rear-spoiler-ducktail-2013-brz-frs-gt86-1159?category=1
I know you guys don’t have it in stock but it’s my favorite wing in the GT86. I just picked up my second 86 and I’ve noticed nobody AT ALL has a video posted of installing it or if it in general and I’ve searched far and wide but it’s the Siedoworks Whale Tale spoiler. I’d love to see some or at least one video of it being installed and hopefully a good quality one compared to a lot of the junk videos that exist of Wing installs on RUclips.
Use some 3M activator on the spoiler and truck lid prior to installing the tape and it will NEVER come OFF! Only neg is that once it touches its there for ever regardless of it being out of alignment!
Disappointed with speedfactory86. Everytime I order something it always ends up being in back order. It takes months for a small item to ship. I ordered cf ac vents back in Feburary, May is almost over and still hasnt even shipped. And when you contact customer services they give you a false/inaccurate date of when your item will shipp.
FormedAndFunctioned okay I have a 16, right now I have the holes plugged so I’ve been looking for something like this in carbon. Do any of the other ones cover up the holes like the TRD one?
@@patrickburnett9970 the TRD trunk lip will also cover the same area as the one featured in the video. (I had emailed the staff at ft86sf and they say the same thing)
Okay that's cool and all, but what if I want to take one off? My TRD Spoiler is peeling at the edges and I need to remove it so I can clean out the dirt underneath.
I would try some fishing line. Get the middle of a long strand at the edge of the bottom and gently do a sawing motion, you should be able to remove it, but there will be a lot of adhesive clean up.
Fishing line as last comment said and if you want to remove the old glue get a emblem remover wheel put it on a drill and you should get it removed with in a good 15 min or less as I did then just clean it up and well then this vid helps you re align it up. Good luck
I’m sure a lot of people can probably agree but when I watch this channel I feel like a kid in a candy shop
It's exactly that hahaha
Yep. Like a broke ass kid in a candy store cause that spoiler is crazy $399😂
This is the best time for this video. Mine is arriving tomorrow. Perfect timing guys.
That is one intelligent way to do it, knowing myself I would have probably pulled all masking from the tape before slapping it on the car. But this seems like a smart way to do it. Good video.
HUGE SIDE NOTE:
If you have a spoiler installed from the factory you may have fitment issues. Especially with the 17+ models. This and the TRD spoiler do NOT cover the oem holes! Please be aware and don’t make the mistake I did!!!
Is there a duck bill available wich will Cover the holes from the 17 model?
@@MS-wd7gp I don't know if you are still looking for one, but Verus Engineering just released a ducktail spoiler that covers the OEM holes in 17+ models.
www.verus-engineering.com/shop/product/a0176a-carbon-rear-spoiler-ducktail-2013-brz-frs-gt86-1159?category=1
@@MrMontag95 hey will this spoiler cover the OEM holes on a 2014 frs monogram becuz the 2014 frs monogram comes with a factory spoiler install on it.
Thanks, exactly what I needed to know
I always look forward to the vids please don't stop!
literally just bought one! perfect timing!
I know you guys don’t have it in stock but it’s my favorite wing in the GT86. I just picked up my second 86 and I’ve noticed nobody AT ALL has a video posted of installing it or if it in general and I’ve searched far and wide but it’s the Siedoworks Whale Tale spoiler. I’d love to see some or at least one video of it being installed and hopefully a good quality one compared to a lot of the junk videos that exist of Wing installs on RUclips.
Link to the 3M Tape?
Finally a spoiler installation video!
this doesn't cover the brz spoiler holes.
Damit
Cool video! I plan on getting the OEM style spoiler made of carbon
I have a Limited brz with the stock spoiler. I assume it covers the wholes but have to plug them 1st
How do you take off the stock one?
You can find that in youtube by someone. The million dollar question is will water still go in to the holes of the oem.
@@angel__randomizer2697 Yup! Sure will!
This is a really nice carbon fiber trunk handle
You have ones you can mount with holes and not just 3m? 🤔
If I have stock frs spoiler does this duckbill cover the holes?
looks so much better without any spoiler
Totally agree. The lines of the car are already perfect. The carbon fiber looks horrible
I tried the exact steps, but mine fell off and I used silicon the next time and it works
In any exterior mod, I use 3M then with black silicon applied on the edges to its watertight and stickier.
What exhaust is on the car in this video? And does this method leave a gap between the lip and the body?
We'll be release more info on the exhaust soon. As for the Gap there isnt really one with this Duckbill.
FT86SpeedFactory what the difference between this ducktail & the legsport clubman one. Why is the clubman more expensive?
@@FTspeed Thomas I need that exhaust 😂
Can we get some more trd parts for the 2013-16? We need some love too..
Can you make a video on how to install a hydraulic handbrake please?
Use some 3M activator on the spoiler and truck lid prior to installing the tape and it will NEVER come OFF! Only neg is that once it touches its there for ever regardless of it being out of alignment!
So it doesn't need to be drilled into the car. Right?
Can you do a video on how to remove the stock spoiler?
Yes please!!
Awesome vid! Could you make a video on "How to OEM Spoiler delete?"
When will you guys have the black edition Valentis back in stock ? Im trying to order some but it says back ordered for the longest !
What kind of tape should I use to mount the spoiler? There’s so many different kinds I’m not sure which one to use
I've always thought using just 3m tape isn't enough. The sun wouldn't cause it to fall off?
Luis Alicea Most OEM’s use double sided tape to hold on badges. The 3M tape is pretty tough stuff.
the video quality looks AMAZING! what camera/equipment do you guys use?
Does anyone know if this duckbill covers the 2014 premium model holes left from the factory spoiler?
Stupid question, where specifically did you buy the 3m tape?
Can we use it for Altima 2019 the same spoiler ? And where did you buy them ?
Does the OLM 3 piece TR style spoiler come with a rubber gasket for weatherproofing?
What taillights are those and is that the stock diffuser?
Great job. !!
Disappointed with speedfactory86.
Everytime I order something it always ends up being in back order. It takes months for a small item to ship. I ordered cf ac vents back in Feburary, May is almost over and still hasnt even shipped. And when you contact customer services they give you a false/inaccurate date of when your item will shipp.
Same here. Ordered headers a while back and still nothing..
You think body glue would hold better than 3M? 🤔
Use Flex Seal. Best shit ever made
Can you tell me the 86's wheel measurements with tire size. Love the look.
Does that 3m tape actually hold that well??
You'd be surprised how strong some 3M is!
I miss the sard wing so much, love the vids though
Can you please explain how that's anywhere near possibly going to stay on at high speeds?
pill wost Literally every frs has this exact spoiler and no one has issues
@@daduncker20D I've never seen an FRS with this spoiler. Do you have one/have you seen one with it?
I need one !
Does this wing cover up all the holes from the stock BRZ wing?
Itll cover the holes for the 13-16 wings but not on the 17-19
it didn't cover the holes for me
FormedAndFunctioned okay I have a 16, right now I have the holes plugged so I’ve been looking for something like this in carbon. Do any of the other ones cover up the holes like the TRD one?
John Nguyen what year BRZ do you have
@@patrickburnett9970 the TRD trunk lip will also cover the same area as the one featured in the video.
(I had emailed the staff at ft86sf and they say the same thing)
Do an install video on the OLM front lip please!
You can use the tape for clamp IMHO... Just tape it across the spoiler.
How to take off the stock one tho? lol
Ito Ito No Mi ik fr I need to know how
I'm just looking at his face THE WHOLE TIME
How much horsepower does its adding?
Can you guys do an install video for the tS stripes?
Ben Wang they already did in a past tech tip vid
Okay that's cool and all, but what if I want to take one off? My TRD Spoiler is peeling at the edges and I need to remove it so I can clean out the dirt underneath.
I would try some fishing line. Get the middle of a long strand at the edge of the bottom and gently do a sawing motion, you should be able to remove it, but there will be a lot of adhesive clean up.
Fishing line as last comment said and if you want to remove the old glue get a emblem remover wheel put it on a drill and you should get it removed with in a good 15 min or less as I did then just clean it up and well then this vid helps you re align it up. Good luck
What’s that add...bout 15hp to the wheels?
Do not put dawn dish soap on your car...
Ello
Finally a duckbill; still waiting on that quackback to come out :/
If u just used double sided tape, it will be ripped off and stolen in my country
anybody got a used one for sell? lol
Hmu, Brian Chong, im selling mine for 44 dollars
Where's the headlight eyelashes we've all been asking for? Disappointed again..
Headlight eyelashes? 😂
Sucks how people can just steal this right off of your car... :(
not if its glued
That's a Surfboard not a duckbill 🤣🤣🤣🤣 NO 3m tape, wtf 🤣🤣🤣🤣
$399. No thanks 😂
first
Waste of money dirt and water get underneath and I think it would eventually come off.
Cutting Edge dam I want to do this but if what you’re saying is true then what’s the point
Think it looks better without it. Already has a nice shape. Carbon fiber looks tacky and messes up the lines of the car
Which double sided tape should I use there’s so many?
does this cover oem 2013 spoiler hole??
Kaito Seki yes
Can 3M really hold?
Yes if you add 3M 94 primer to the surfaces prior to applying the 3m tape. 🤘