LOWRANCE ELITE TI FISHFINDER - 2 Things I wish somone would have told me!

Поделиться
HTML-код
  • Опубликовано: 15 сен 2024
  • LOWRANCE ELITE TI FISHFINDER
    Thought that I would touch upon two things that I wish someone would have told me after I bought the unit for my Wilderness Systems Radar 135.
    They are tips.. 2 of em .ol
    Yankee Tanker MERCH!! teamlocker.squ...
    Help support the Tanker by checking out my store on Amazon: www.amazon.com...
    Make sure to check out : www.yaktactics... - If you really want to go nuts my episode is # 29
    Kayaks : Feelfree Lure 11.5 & Wilderness Systems Radar 135
    Fish Finder: Lowrance Hook2 5in & Lowrance ti7
    Rods & Reels: 13 Fishing Omen’s & Concept A’s
    Camera: GoPro
    10% off Biwaa Baits: www.biwaa.com YankeeTanker10
    Find me on social media all at Yankee Tanker Outdoors.
    #yankeetankeroutdoors, #kayakfishing, #kayakbassfishing,
  • СпортСпорт

Комментарии • 64

  • @Caughtitoutdoors
    @Caughtitoutdoors 5 лет назад +4

    I got the TI9 (nine inch model) with the total scan transducer at Bass pro when they went $400 off!!! I paid $600. And the fish reveal works with the side scan just as the down scan. Side scan is a game changer when targeting fish around bait balls. Both your traditional and down scan will show you there are fish, but they can be thirty feet to your left or right, all the while, your vertical jigging for fish that are not where you think they are.

    • @YankeeTankerOutdoors
      @YankeeTankerOutdoors  5 лет назад

      Fish reveal does not work with sidescan. That’s what lowrance says. Are you saying it does?

    • @Caughtitoutdoors
      @Caughtitoutdoors 5 лет назад +1

      @@YankeeTankerOutdoors
      I use a split view with traditional side and down scan. I have the fish reveal on. and when the down scan is showing the yellow red and blue markings, I see them also on the side scan window. So i just assumed it worked on both. But I now am going to run side scan only and see if the fish reveal works that way.

    • @YankeeTankerOutdoors
      @YankeeTankerOutdoors  5 лет назад

      Yeah that’s not what I mean. The split view of course it works.

    • @reddawng43x91
      @reddawng43x91 3 года назад

      Fish reveal does in fact work with sidescan on my elite ti2

    • @crx2922
      @crx2922 3 года назад +1

      Please wish transducer you use on your unit thanks

  • @christopherhobby8391
    @christopherhobby8391 2 года назад +1

    I see that Georgia Bulldog “GEORGIA G” behind you. Yes sir!! National Champs!! We got us one ☝🏻.

  • @charliesmith9528
    @charliesmith9528 4 года назад +1

    Several places today have 9 inch screen hummingbird and garmin units with down and side imaging for 499-600..about 400 off ...i presently own a helix 5 with down imaging,,only problem is is open sun screen is hard to see ...wanting to upgrade to larger screen because of my failing eyesight..i do like the fact that the lowrance had touch screen..i just want a unit that is very clear and worth the investment...a 99 garmin will keep you aware of depths plenty good enough however i fish santee cooper lakes and i want to be able to find brushpiles...brushpiles in our lake mean fish in the boat..especially mid and late summer...thanks for the video..clear and to the point so anyone can understand..

  • @richie2dicks468
    @richie2dicks468 4 года назад +2

    Side scan can cover way more water then anything else. It’s a must have.

    • @YankeeTankerOutdoors
      @YankeeTankerOutdoors  4 года назад

      not for a kayaker - I understand how SS works.. and it is my opinion that it is not worth it for a kayak.

    • @williamsoutdoors6126
      @williamsoutdoors6126 2 года назад

      @@YankeeTankerOutdoors I think it’s important to mention those using trolling motors or the faster pedal ones with the SS though. It’s not just for seeing structure to fish it real time. It is highly valued when used to find, and waypoint, structure to fish later and it allows to get more detailed contour with Genesis Live.

  • @RodNPaddle
    @RodNPaddle 4 года назад +2

    Hey Matt, I use the 7Ti with side scan in an Atak and Radar. I was told about the side scan issues and needing to lower the transducer - they were wrong. Mounting the transducer direct to the pod, on the lowrance mount, leaving the bottom of the transducer flush with the bottom of the hull around the scupper, and the images are no different at all than if you drop the transducer lower into the water. Food for thought.

    • @YankeeTankerOutdoors
      @YankeeTankerOutdoors  4 года назад

      Rod N Paddle it might be the way the hulk is designed that it works that way. Still great info.

  • @petecampa
    @petecampa 5 лет назад +3

    Informative...koo...I also have the 9ti on my Titan...my 1st finder and to this point I think it's great...

  • @utubesignupsucksass
    @utubesignupsucksass 2 года назад

    Well shoot! Watching this video two days late as usual I just got my 128g SD card in the mail. Now ordering a 32g. Thanks for the video.

  • @christophercurtis9366
    @christophercurtis9366 2 года назад

    Believe it or not I bought the same Lowrance unit to put on a wilderness Kayak in 2017. Drove from Texas to New Mexico to fish for a week, and could never get the touch screen to work. Later that year I swapped batteries for a larger unit (thinking the Elite TI demanded more power), and finally replaced the Lowrance unit. I wish I'd seen this video back then. I figured out the grounding problem when I setup the Elite TI for Ice fishing and found another video that talked about the grounding problem.

  • @MooMooOutdoors
    @MooMooOutdoors 5 лет назад

    I did think you were gonna complain about it 😂😂😂😂😂. Very informative 👍👍.

  • @betavinasmokewolf9890
    @betavinasmokewolf9890 5 лет назад +1

    Nice tips man! Even though I don’t own a lowrance, this is a good thing to know whenever I upgrade. 👍👍

  • @boashna
    @boashna 4 года назад +1

    my first unit was black and white on my boat .. my 2c down scan works if there are no waves and side scan does not work it failed to show me a bridge legs 3ft wide . fish finders work better in super deep water and they work best on fresh water and calm day

  • @joelgiljam7439
    @joelgiljam7439 3 года назад +1

    I ended up reformatting a 64gb to FAT32 and it allowed it to read it.

  • @byronargueta3331
    @byronargueta3331 3 года назад +1

    Can you do an update through wifi instead of using an SD card?

  • @GCBassin
    @GCBassin 5 лет назад +1

    Love my Ti 7, but wish I had gone with the 9. But my mounting place is farther away than yours.

  • @BassGeek
    @BassGeek 5 лет назад +1

    Didn't know the ground trick but I could have helped ya with the card part.

    • @YankeeTankerOutdoors
      @YankeeTankerOutdoors  5 лет назад +1

      If I would read the damn manual I wouldn’t have these issues. But ya know. I’m from the south. We just figure shit out or get electrocuted. lol

    • @BassGeek
      @BassGeek 5 лет назад +2

      @@YankeeTankerOutdoors Who's this guy Manuel you speak of. lol

    • @YankeeTankerOutdoors
      @YankeeTankerOutdoors  5 лет назад

      😂😂😂

  • @SargesAdventures
    @SargesAdventures 3 года назад +1

    New Sub here.... looking at this model for a Kayak install myself.
    I have the Helix 7 on my Outback but, am looking at the Hook2 7 or the 7 Ti used for another kayak setup.

  • @paulbowkunowicz6960
    @paulbowkunowicz6960 3 года назад +1

    thank you

  • @matpleadwell2901
    @matpleadwell2901 5 лет назад

    got the elite ti5 a while back but i think mine might have been updated for me. i havent had grounding issues or updates yet. i did switch out my navionics maps for the lowrance set and now i dont get topos of anywhere through navionics but i figure that was because i am not paying for navi
    also great video. you rock. hitting bullards for the weekend. see you there

    • @YankeeTankerOutdoors
      @YankeeTankerOutdoors  5 лет назад +1

      Make sure you are connected to the internet when you check for updates.

  • @slabslayer258
    @slabslayer258 4 года назад

    Ive Had the 7ti with total scan in my aluminum boat an battery is sitting on. Plastic shelf an I have a dedicated power from battery to the graph head unit an never have had a touch screen problem I have power an ground from battery to unit but battery is not direct grounded to nothing

  • @norcalifishing4861
    @norcalifishing4861 5 лет назад +1

    That's weird my Ti 5 inch doesn't have those issues. Except the SD card.

  • @Josey4u
    @Josey4u 4 года назад +1

    Hey man! Been a subscriber for a little while. How about an update on the unit? I'm about ready to put this on my native Titan 10.5. Are you still pretty happy with it? I got the 9-inch version but all the mechanics are the same it's just screen size. Glad to know about the grounding. I watched your video before I bought it. Hopefully when I get it on the water it is grounded.

    • @YankeeTankerOutdoors
      @YankeeTankerOutdoors  4 года назад +1

      I am super happy with my Ti unit. Great and never have had an issue.

    • @Josey4u
      @Josey4u 4 года назад +1

      @@YankeeTankerOutdoors Any side scan problems with this mounted on the yak? I was going to mount mine the MOBBIN way. Hey also, how long will it run for you on a a battery charge?

    • @YankeeTankerOutdoors
      @YankeeTankerOutdoors  4 года назад +1

      Josey4u I don’t have side scan. Waste of money. Side scan is only effective when moving 3+ mph. As kayakers I don’t think it is worth it. Battery life is dependent on which battery you use. I have a lithium. I can go two days.

    • @Josey4u
      @Josey4u 4 года назад

      @@YankeeTankerOutdoors Hey one more thing, the grounding problem is fixed once it is in the water yes? I have tossed this around in my head and between the hull and battery compartment, this still gets grounded?

    • @YankeeTankerOutdoors
      @YankeeTankerOutdoors  4 года назад +1

      @@Josey4u Yes once in the water no issue. Not sure - I think it might be ok. You have to put a bit of water in your hull to do it that way anyways.

  • @andylin5618
    @andylin5618 3 года назад

    i just got an elite 5 ti head unit, and would like to know which model transducer you work with? does it comes med/ high chirp option?

  • @halanfones9345
    @halanfones9345 3 года назад +1

    What graphics card are you using

  • @charliesmith9528
    @charliesmith9528 4 года назад +1

    Are the down scan and side scan images in color

    • @YankeeTankerOutdoors
      @YankeeTankerOutdoors  4 года назад

      I do not have side scan. I think it’s pointless in a kayak. Everything in color yes.

    • @dedricbelcher341
      @dedricbelcher341 4 года назад +1

      Yankee Tanker I am a newbie. Could you please explain why other then possibly damaging it . Will it not work properly because of not maintaining speed of 2mph or 5mph ?

    • @TWC6724
      @TWC6724 3 года назад +1

      @@YankeeTankerOutdoorsWhy is it pointless? Just wondering because I'm about to get into kayak fishing.

    • @YankeeTankerOutdoors
      @YankeeTankerOutdoors  3 года назад

      Side scan really only reads properly when you are moving. At a speed of more than 2 mph.

    • @reddawng43x91
      @reddawng43x91 3 года назад

      Any color u want

  • @howlinhog
    @howlinhog Год назад

    "Covering it up" is not the fix, touching the negative terminal is the fix for out of water operation. Not sure why you use the phrase "covering it up" and because it's "not grounded" in the same sentence. It's just weird and technically incorrect.

  • @drmrjon
    @drmrjon 3 года назад +2

    What's wrong with your hands? You keep waving them around.

    • @YankeeTankerOutdoors
      @YankeeTankerOutdoors  3 года назад +6

      sorry I get excited when I think of all the dickhead comments I could possibly receive from someone like you.

    • @reddawng43x91
      @reddawng43x91 3 года назад

      Lmmfao!

    • @reddawng43x91
      @reddawng43x91 3 года назад +1

      @@YankeeTankerOutdoors agreed