In general, the TI units are faster in response to inputs. This is seen when quickly switching between sonar, downscan, chart, and split screens ruclips.net/user/postUgkxeAxH15LxhjGlg5-CRYqjTGTEH0tbY4vk recommend The Hook units will show some lag on button pushes and screen switching. The big ticket item though is maps. If you install a mapping card such as Navionics or the free C-Map Genesis which has a lot of map detail, then moving around the map with the cursor or when running down the lake can lag significantly on the Hook units, but is seamless with the TI units.
Hi, i have the 5Ti and bought now a Simrad totalscanner now for it. Do you know what kind of Scanner i have to set-up in the Manual? And - there's a Totalscanner M/H and L/H. What means M/H, L/H?
Hi Lawren. Great video! Have a question about screen scroll speed setting. Either I am searching an area at 4-5 mph or slow troll/spot-lock and casting to promising features. What screen scroll speed(s) should I set my TI to?? Seen videos where they suggest that the (hummingbird) sonar scroll speed be set relative to the boat speed. Would appreciate you clearing this up for me. Cheers, Hank
Personally I don't buy into that set according to boat speed. I like to set it according to how fast I want the screen to scroll. And that is usually set to the units default or the next level up. I would never go lower than those settings and extremely rarely go higher. The only time I would recommend going higher is when you are stationary and fishing vertically (ice fishing). In this situation you don't need the detail of the sonar info below because you aren't moving. But this will give you faster screen updates to watch fish reacting to your lure. The down side to setting it high is that everything gets stretched out and it usually gets really jittery on the screen. The downside to setting it too low is that everything gets compacted and loses its actual shape which makes understanding what you are seeing harder. The only other time I would go to a higher speed would be fishing 500' plus
@@InDepthSonar Thanks for the reply Lawren! That is pretty well what I have always done. Mess with the scroll speed too much and I lose sense of how far back features are. Cheers, Hank
*On the TI unit you get additional features such as various sonar color palletes,>>>**allabout.wiki/fd12** different waypoint icons, a line indicating course and heading on the chart, etc. There are a lot of little details that are not available on Hook units, but they are not that significant overall.*
Does the elite 7 ti have ice mode? Trying to decide between helix 7 si and elite 7 ti, as I want to use the unit for summer and winter. I know I would have to purchase an ice ducker for either model. Thank you
Hi Lawren, i am planning to buy a Lowrance unit for deep waters of Mediterranean Sea. I would like to ask about 1 kW transducers compatibility with Elite ti units. I am planning to combine Elite 7 ti or 9ti with a tm185m airmar transducer. Would it be compatible with each other?
Lowrance lists 1kw transducers as compatible but the maximum output of the unit is 500 watts. So to me it wouldn't make sense. You would need the TM185M with the XSonic 9 pin black connector for that unit if you choose to do it. You are better off looking at a Simrad S5100 Sounder module 000-13260-001 which is 600w - 3kw and add it to a compatible unit.
just got my today... the touch screen is not very responsible. it's working intermittently. very very annoying and frustrating. i ran the screen calibration and the touch is not working when clicking the square symbol. basically it's not working i would say at all. returning it tomorrow... is there any setting I need to change. but wait I even have issue clicking the accept button on startup...
+GOOD BLESS There is no problem with your unit. If the transducer is not in the water the touchscreen will not function. What you can do is hold the negative terminal of the battery and that will ground it. What I did was attach a short wire from the negative terminal and then hold the other end. Don't return it because you've got the best 7" unit on the market today in that price range
Love you videos. Curious on hooking up a TI 7 to my xi5 . if i mount the TI 7 at the console and the transducer on the transom , ,what would i need to control the xi5 from there? Is it just a networking cable ? Or the gateway kit? Thanks
You'll need the Gateway and NMEA2000 starter kit. You may also need a 25' NMEA2000 extension cable as the starter kit only comes with a 15' I believe. So that'll all depend on how long a cable run you have.
I just got my elite7 ti and am running thru the simulator trying to figure it out. I can't seem to find how to display the downscan image on the screen. Any help will be appreciated. thanks....great videos
+Brenda Heussner Press the Pages hard button. Then select structure. Then in the menu on the top right srcoll down to view and change it from left&right to down. If that doesn't work let me know and I'll suggest something else
On the color palette in this video rocks will show as yellow bumps on the bottom. The demo doesn't really do a good job of showing rocks as there is more standing timber in this one than anything.
Yes it can. I have helped a guy install one but we had to make a custom bracket to allow it to clear the Universal Sonar transducer in his Minn Kota. If you have less than 80lb thrust it won't fit well. Also you require a reg skeg. A motor with a front skeg will cause the transducer to come in contact with the prop
Hi Lawren I'm not sure that the sonar image I'm getting has interference or is normal. Is there some way I could post a screenshot or send you an image to look at?
That looks like your surface clarity and noise rejection is higher than OFF. I would recommend turning those off, then reducing your sensitivity so there is just some light speckling in the background.
hi I have a question i live in sweden on the Baltic Sea and the water mix Salty and fresh the question is when i do the Setup Wizard on lowrance ask if u will primanly use this unit on the lake?so what i answer yes or no! thx
Hey, I am almost at my wits end with this unit. I am in a hobie kayak I average 4mph when I am moving. I am not seeing any arcs or any signs of life. What should my ping speed be set at? Anything you can do to help it GREATLY appreciated. I have the transducer mounted in the factory Hobie Lowrance area.
+KluelessKayaker Most often you won't mark fish in anything less than 18' that will be of any value to you. The shallowest I've ever caught fish that I marked was in 12' and those fish were right below the transducer. As soon as they moved off to the side the were off the screen. The only things that will effect making fish in shallower water is the surface clarity on anything but off (unless you have the latest software version where Lowrance changes how it works) and low sensitivity. Next time you are out use a drop shot and lower it right below the transducer and see if the unit marks it. If it does you don't have a problem, there just aren't fish there.
is this the Elite-Ti Software Upgrade (v 2.5) that u download from the unit WIRELESS?when i went to about from the unit there no Software Upgrade available!!
Do other wireless functions work? If so then maybe its just not pointing to the right directory for the download. Just manually do it this time and see if it happens again next time.
+Enriko Mulawarman If you have demo mode on you could lose the settings. Turn off demo mode and simulator or just plug in a transducer, then set the unit up
i have problem with my lowrance elite 7 ti.when i turn it on does not read the depth till i turn it off 3 times then start work and when i put it on standby do it again.whats the problem?
yes i using the shallow water mode and i tryed other mode too and still the same.no just lowrane 7 ti i have on the boat.and i have watch ur video if there and Problems and did all the settings and still the same
+tomui sam If it's happening in manual mode (auto sens and depth range turned off) then you probably have a hardware issue with either the unit or transducer.
+Bass Monkey Yes I have. You'd want to compare the helix to the Hook models not the Elite Ti units. I'd say the chirp sonar and easier to use menu would give Lowrance the advantage.
hi.i tried to register in gofree shop on my elite 7 ti. but there no sign up just login and reset your password.so how i can open account to download map on the unit?can u help me
Yes you can. Here is the part number for the ice kit specific to the Elite Ti units 000-14565-001 that are 7" or under. Here is a part number if you just need the transducer 000-14889-001. These are great units on the ice!
+Don Frederick I have a second power cable and use a 12 volt 9ah battery. The same ones used for ice fishing kits. AquaVu sells the cheapest ones I've found in stores.
In general, the TI units are faster in response to inputs. This is seen when quickly switching between sonar, downscan, chart, and split screens ruclips.net/user/postUgkxeAxH15LxhjGlg5-CRYqjTGTEH0tbY4vk recommend The Hook units will show some lag on button pushes and screen switching. The big ticket item though is maps. If you install a mapping card such as Navionics or the free C-Map Genesis which has a lot of map detail, then moving around the map with the cursor or when running down the lake can lag significantly on the Hook units, but is seamless with the TI units.
thanks so much. my first unit and no real idea of what i was doing till now. :D
You're very welcome!
Thanks for this! Been looking for this exact video! Keep up the good work!
+Mark Polsky Thanks for the kind words!!
+Mark Polsky Thanks for the kind words!!
Can you also maybe do a video on what fish look like on DS,Sonar, and SI, thanks.
Hi, i have the 5Ti and bought now a Simrad totalscanner now for it. Do you know what kind of Scanner i have to set-up in the Manual? And - there's a Totalscanner M/H and L/H. What means M/H, L/H?
Update your software to the latest version and the TotalScan will auto detect. You shouldn't have to make any changes
Hi can 7Ti can detect if the boat going on high speed
Thank fir the video. It was a very good and helpful instructional video.
Hi Lawren. Great video! Have a question about screen scroll speed setting. Either I am searching an area at 4-5 mph or slow troll/spot-lock and casting to promising features. What screen scroll speed(s) should I set my TI to?? Seen videos where they suggest that the (hummingbird) sonar scroll speed be set relative to the boat speed. Would appreciate you clearing this up for me. Cheers, Hank
Personally I don't buy into that set according to boat speed. I like to set it according to how fast I want the screen to scroll. And that is usually set to the units default or the next level up. I would never go lower than those settings and extremely rarely go higher. The only time I would recommend going higher is when you are stationary and fishing vertically (ice fishing). In this situation you don't need the detail of the sonar info below because you aren't moving. But this will give you faster screen updates to watch fish reacting to your lure.
The down side to setting it high is that everything gets stretched out and it usually gets really jittery on the screen. The downside to setting it too low is that everything gets compacted and loses its actual shape which makes understanding what you are seeing harder.
The only other time I would go to a higher speed would be fishing 500' plus
@@InDepthSonar Thanks for the reply Lawren! That is pretty well what I have always done. Mess with the scroll speed too much and I lose sense of how far back features are. Cheers, Hank
*On the TI unit you get additional features such as various sonar color palletes,>>>**allabout.wiki/fd12** different waypoint icons, a line indicating course and heading on the chart, etc. There are a lot of little details that are not available on Hook units, but they are not that significant overall.*
Was a gift and they loved it
nice
Can you tell me if this unit is compatible with Motor guide xi3? I heard you mention xi5 in part 1
Yes it is.
I have a question with the types of fishing modes what will work best for saltwater fishing in around 2-30m of water ? Cheers
I would try General Use to start with. I think there is one in there called Salt Water that you could try as well.
Does the elite 7 ti have ice mode? Trying to decide between helix 7 si and elite 7 ti, as I want to use the unit for summer and winter. I know I would have to purchase an ice ducker for either model. Thank you
Yes the Elite 7 TI does have an Ice Mode on it. Both would be good choices, but I think I'd go Elite Ti over the Helix due to the touchscreen
Hi Lawren, i am planning to buy a Lowrance unit for deep waters of Mediterranean Sea. I would like to ask about 1 kW transducers compatibility with Elite ti units. I am planning to combine Elite 7 ti or 9ti with a tm185m airmar transducer. Would it be compatible with each other?
Lowrance lists 1kw transducers as compatible but the maximum output of the unit is 500 watts. So to me it wouldn't make sense. You would need the TM185M with the XSonic 9 pin black connector for that unit if you choose to do it.
You are better off looking at a Simrad S5100 Sounder module 000-13260-001 which is 600w - 3kw and add it to a compatible unit.
just got my today... the touch screen is not very responsible. it's working intermittently. very very annoying and frustrating. i ran the screen calibration and the touch is not working when clicking the square symbol. basically it's not working i would say at all. returning it tomorrow... is there any setting I need to change. but wait I even have issue clicking the accept button on startup...
+GOOD BLESS There is no problem with your unit. If the transducer is not in the water the touchscreen will not function.
What you can do is hold the negative terminal of the battery and that will ground it. What I did was attach a short wire from the negative terminal and then hold the other end.
Don't return it because you've got the best 7" unit on the market today in that price range
Love you videos. Curious on hooking up a TI 7 to my xi5 . if i mount the TI 7 at the console and the transducer on the transom , ,what would i need to control the xi5 from there? Is it just a networking cable ? Or the gateway kit?
Thanks
You'll need the Gateway and NMEA2000 starter kit. You may also need a 25' NMEA2000 extension cable as the starter kit only comes with a 15' I believe. So that'll all depend on how long a cable run you have.
I just got my elite7 ti and am running thru the simulator trying to figure it out. I can't seem to find how to display the downscan image on the screen. Any help will be appreciated. thanks....great videos
+Brenda Heussner Press the Pages hard button. Then select structure. Then in the menu on the top right srcoll down to view and change it from left&right to down. If that doesn't work let me know and I'll suggest something else
Thank you
How do you tell if you're going over rocks and boulders and harder bottoms ?? Is it yellow orange I'm confused
On the color palette in this video rocks will show as yellow bumps on the bottom. The demo doesn't really do a good job of showing rocks as there is more standing timber in this one than anything.
If saltwater just general ?
If you mean the fishing mode then I would choose general or saltwater
@@InDepthSonar oh ok thx
can the total scan transducer be used on a trolling motor? Thanks nice, informative videos!
Yes it can. I have helped a guy install one but we had to make a custom bracket to allow it to clear the Universal Sonar transducer in his Minn Kota. If you have less than 80lb thrust it won't fit well. Also you require a reg skeg. A motor with a front skeg will cause the transducer to come in contact with the prop
A reg skeg? Not sure what that is? I figured I would have to make a bracket. Its going to go on a Motorguide Xi5. Thanks for the reply.
+Matthew Fliege Sorry autocorrect...Rear skeg
haha gotchya. by chance what was way you routed the transducer cable since the xi5 does not have a slot on the shaft..
Hi Lawren
I'm not sure that the sonar image I'm getting has interference or is normal. Is there some way I could post a screenshot or send you an image to look at?
Post it on Instagram or FB and send a link. Not sure if you can get a pic on here or not
How's this :-) i.imgur.com/ELuGmyH.jpg
That looks like your surface clarity and noise rejection is higher than OFF. I would recommend turning those off, then reducing your sensitivity so there is just some light speckling in the background.
hi I have a question i live in sweden on the Baltic Sea and the water mix Salty and fresh the question is when i do the Setup Wizard on lowrance ask if u will primanly use this unit on the lake?so what i answer yes or no!
thx
+tommy sam I would select no.
thanks
Hey, I am almost at my wits end with this unit. I am in a hobie kayak I average 4mph when I am moving.
I am not seeing any arcs or any signs of life. What should my ping speed be set at? Anything you can do to help it GREATLY appreciated. I have the transducer mounted in the factory Hobie Lowrance area.
+KluelessKayaker How deep of water are you in?
Most of the times shallow (1-5ft) But when i go out out into 20ft waters i don't see anything :(
IDK, I just thought I would see nice arcs or something....
+KluelessKayaker Most often you won't mark fish in anything less than 18' that will be of any value to you. The shallowest I've ever caught fish that I marked was in 12' and those fish were right below the transducer. As soon as they moved off to the side the were off the screen.
The only things that will effect making fish in shallower water is the surface clarity on anything but off (unless you have the latest software version where Lowrance changes how it works) and low sensitivity.
Next time you are out use a drop shot and lower it right below the transducer and see if the unit marks it. If it does you don't have a problem, there just aren't fish there.
Here is a link so some screen shots.
facebook.com/kluelesskayaker/posts/603393989853527
is this the Elite-Ti Software Upgrade (v 2.5) that u download from the unit WIRELESS?when i went to about from the unit there no Software Upgrade available!!
Yes the latest one is 2.5 which came up on the Lowrance site a few days ago.
oh ok but the Software Upgrade did not show on my unit what the issue u think?
Do other wireless functions work? If so then maybe its just not pointing to the right directory for the download. Just manually do it this time and see if it happens again next time.
yes the gofree shop works.thx man
are those setting in demo mode will be saved and applied on real world?
+Enriko Mulawarman If you have demo mode on you could lose the settings. Turn off demo mode and simulator or just plug in a transducer, then set the unit up
i have problem with my lowrance elite 7 ti.when i turn it on does not read the depth till i turn it off 3 times then start work and when i put it on standby do it again.whats the problem?
+tomui sam Are you using it in shallow water mode? Are there any other fish finders turned on at the same time on your boat?
yes i using the shallow water mode and i tryed other mode too and still the same.no just lowrane 7 ti i have on the boat.and i have watch ur video if there and Problems and did all the settings and still the same
+tomui sam If it's happening in manual mode (auto sens and depth range turned off) then you probably have a hardware issue with either the unit or transducer.
hi i want ask about new lowrance 7 ti SOFTWARE i have ISSUE to download it from the unit WIRELESS ?do u have that too?
+tommy zander Nope. I just updated the unit and everything works fine.
How did you put it on " simulator mode" ??? Thanks in advance 😁
Hit the Pages key then go to Settings, then scroll down to the bottom and you'll see Simulator. You can turn it on in there.
Do you know if Lowrance has an Ice Transducer that works with these units yet?
+James Attfield Yes it does but you will need the 7 to 9 pin adapter
have u tested helix models do they compare
+Bass Monkey Yes I have. You'd want to compare the helix to the Hook models not the Elite Ti units. I'd say the chirp sonar and easier to use menu would give Lowrance the advantage.
hi.i tried to register in gofree shop on my elite 7 ti. but there no sign up just login and reset your password.so how i can open account to download map on the unit?can u help me
You probably have to sign up on their website first
can u give the website please?thx
+tommy zander I googled it and this is what I came up with insightgenesis.laketrax.com/Account/Register
thanks man then i can use the account on the unit?dose the 7ti totalscan work on 9ti?
+tommy zander That's right. Yes you can use the total scan transducer on all Ti models
Thanks a lot.God bless u.
Does Lowrance elite 5 ti have NMEA2000 port.
God blesses me daily brother! There is not NMEA2000 port on the 5Ti...only on the 7Ti and up
Can this unit be used for ice fishing?
Yes you can. Here is the part number for the ice kit specific to the Elite Ti units 000-14565-001 that are 7" or under. Here is a part number if you just need the transducer 000-14889-001. These are great units on the ice!
So is there a ram mount option?
+cawglock23 Yes there is. Use the RAM-101-LO11.
Lawren Wetzel what is your sensitivity at
You want to set it as high as possible without cluttering the background with noise. Generally it's set around 60-95% depending on depth and cover.
How do you power off the boat, indoors?
+Don Frederick I have a second power cable and use a 12 volt 9ah battery. The same ones used for ice fishing kits. AquaVu sells the cheapest ones I've found in stores.
thank you nice vid it made me buy one ). but I cant find help how to pair to droid tablet ?!? anyone know how?
You just go into your WiFi settings and connect to the Elite Ti's internal WiFi
Thank you