Monorim V3 Front Suspension loose mudguard FIX.

[@nizarzorai2785]

Thanks a lot I just installed the suspension and I have the same problem I've been searching for a solution until I found your video problem fix in 5 seconds 🙏👌

Thank you! Before watch your video I was thinking to take off the front tire and mudguard. now I fix the problem in one minute 👌🏻

[@Foxyboy-iv5cf]

First two seconds after this doing my head in I knew you where going to say the side bolts. What an idiot I am thanks 🤣

[@Foxyboy-iv5cf]

Well unfortunately it never worked seems like after a while the screws do not help. And the metal still moves I have had to put cable ties around mine to hold it in place.

[@SwoOopy]

Thanks !!!

[@sergiosilveira2215]

Thanks a bunch!!!

[@diorson]

Thank you man.

[@goranlovric6128]

It is necessary to fix the fender, but then the shock absorber works much weaker when those two screws are tightened. Try the shock absorber before and after tightening the screws, and you will see the difference.

[@det0xix]

I can't really see the difference.

[@melquizedec]

Hi. My monorim suspension feels super stiff when I pass over a hump in the road....Do you know how can I loose the spring to make it softer? Thanks

[@CraftingAgent]

Any advice on if mines still moving and everything is tight?

[@sickquence]

loose the spring, if you stand on scooter and monorim is pushing the mudguard, that means your spring is too tight, in my case it worked.

[@CraftingAgent]

@@sickquence thanks I've just removed the mudguard now 😂

[@jerryvalenz]

I am about to do the same 😕

[@jerryvalenz]

It happens exactly the same

[@sgpika]

If you thight that screws too much I think you're holding the suspension system. I have the same suspension and having issues...

[@kozuh7945]

What motor is that im tryna get that motor but 500w

[@diegosif2692]

Thanks I have the same issue

[@JohnRaymundNiconi]

Issue still exist when I jump over even a little.

[@rodrigoochoa1119]

did you fix it? i have the same problem

[@JohnRaymundNiconi]

@@rodrigoochoa1119 it can't be fixed. I just bought a 3d print version that has locking bracket on the sides.

[@rodrigoochoa1119]

@@JohnRaymundNiconi thank you for your answer, can you share the link with me pls?

[@JohnRaymundNiconi]

@@rodrigoochoa1119 Sure. Please see this link. drive.google.com/file/d/1hDwgDka9LeVnTbbOP8996vuZ7ifQEO0u/view?usp=sharing

[@ionut.r.d.u]

+ some thread lock :D

[@nacerpaul]

the mudgaurd is way to low , almost touching the wheel. once you step on the scooter, it lower even more, and when you try to break you will fly forward

[@oscarb612]

mogullon

[@pointproductions4734]

This will make the suspension stiffer. Which isn't good..